Page 102 of 609
101
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
• Appears if there is a problem with the radiator system.•Drive slowly to prevent ov erheating and have your
vehicle checked by a dealer as soon as possible.
• Appears when there is a pr oblem with the headlights.•Appears while driving - The low beam headlights
may not be on. When conditions allow you to drive
safely, have your vehicle chec ked by a dealer as soon as
possible.
• Appears if there is a problem with the parking sensor
system.•Check if the area around the sensor(s) is covered with
mud, ice, snow, etc. If the indicator(s) stays on even
after you clean the area, have the system checked by a
dealer.
• Appears if the automatic brake hold is automatically
canceled while it is in operation.•Immediately depress the brake pedal.
•Appears when the automatic brake hold system is
turned off.
2 Automatic Brake Hold P. 454
Models with
parking sensor
system
19 ACURA RLX HYBRID CSS-31TY36500.book 101 ページ ２０１８年３月７日 水曜日 午後４時１９分
Page 103 of 609
102
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.•Fasten the driver’s seat belt.
2 Automatic Brake Hold P. 454
•Appears when the automatic brake hold button is
pressed without depressing the brake pedal while the
automatic brake hold is in operation.•Press the automatic brake ho ld button with the brake
pedal depressed.
2 Automatic Brake Hold P. 454
•Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 454
2 Parking Brake P. 450
•Appears if there is a proble m with the auto high-beam.•Manually operate the headlight switch.
• If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
•Appears when the area around the camera on the
windshield is blocked by dirt, mud, etc.•Stop your vehicle in a safe pl ace, and wipe it off with a
soft cloth.
• If the message does not disappear after cleaning the
lens, have your vehicle checked by a dealer.
19 ACURA RLX HYBRID CSS-31TY36500.book 102 ページ ２０１８年３月７日 水曜日 午後４時１９分
Page 105 of 609
104
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears if the AWD system has a problem due to a
hybrid system or power distribution control failure.•Set the power mode to OFF, then set it back to ON.
Have your vehicle checked by a dealer if the message
appears again.
• Appears when the High Voltage battery is running
extremely low due to continuous slow driving.•Driving at low speed for a long time decreases the
amount of electricity generated, leading to High
Voltage battery drain.
•Appears when the High Voltage battery is drained even
further and a stop is needed to charge the battery.•Stop in a safe place in (P, then charge the High Voltage
battery by letting the engine idle.
2 If the 12-Volt Battery Charging System Indicator
Comes On P. 567
•Appears when the High Voltage battery is being
charged, after it has lost most of its charge. In this case,
the vehicle is parked and the engine is running to
supply power to th e charging system.•Do not drive the vehicle until READY indicator comes
on.
• Apply the parking brake.
2 READY Indicator P. 80
19 ACURA RLX HYBRID CSS-31TY36500.book 104 ページ ２０１８年３月７日 水曜日 午後４時１９分
Page 106 of 609
105
uuIndicators uMulti-Information Display Warning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Flashes when the system sens es a likely collision with a
vehicle in front of you.●Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2 Collision Mitigation Braking SystemTM (CMBSTM)
P. 458
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 402
●Appears when ACC with LSF has been automatically
canceled.●You can resume the set speed after the condition that
caused ACC with LSF to cancel improves. Press the RES/
+ /SET/– switch up.
2Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 402
●Appears when the vehicle in front of you starts moving
while your vehicle is stopped automatically by ACC with
LSF.●Either press the RES/+/SET/– switch, or depress the
accelerator pedal.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 402
●Appears when the distance between your vehicle and
the vehicle ahead of you is too close while ACC with LSF
is in operation.●ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 402
●Appears when pressing the RES/+/SET/– switch down
while the distance between yo ur vehicle and the vehicle
ahead of you is too close.●ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 402
19 ACURA RLX HYBRID CSS-31TY36500.book 105 ページ ２０１８年３月７日 水曜日 午後４時１９分
Page 109 of 609
108
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when pressing the RES/+/SET/– switch down
while the parking brake is applied.• ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 402
2 Parking Brake P. 450
•Appears when the parking brake is applied
automatically while ACC wi th LSF is in operation.•ACC with LSF has been automatically canceled.
2Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 402
2 Parking Brake P. 450
•Appears when pressing the RES/+/SET/– switch down
while the vehicle is movi ng and the brake pedal is
depressed.• ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 402
•Appears if ACC with LSF is canceled while your vehicle
is automatically stopped by ACC with LSF.•Immediately depress the brake pedal.
19 ACURA RLX HYBRID CSS-31TY36500.book 108 ページ ２０１８年３月７日 水曜日 午後４時１９分
Page 111 of 609
110
uuIndicators uMulti-Information Display Warn ing and Information Messages
Instrument Panel
MessageConditionExplanation
•If you are providing little or no steering input, the
indicator blinks and a beeper sounds.•Operate the steering wheel to resume the LKAS.
•Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a system
related to the LKAS. The LK AS cancels automatically
and a beeper sounds.
u Traffic jam assist also canc els if it is experiencing a
problem.• If any other system indicators come on, such as the
VSA ®, ABS and brake system, take appropriate action.
2Indicators P. 76
•Appears when you unlock and open the driver’s door
while the power system is on by two-way keyless access
remote.
2 Remote Engine Start with Vehicle Feedback P. 380
19 ACURA RLX HYBRID CSS-31TY36500.book 110 ページ ２０１８年３月７日 水曜日 午後４時１９分
Page 121 of 609
120
uuGauges and Displays uHead-Up Display
Instrument Panel
The display also sh ows the following
warnings.
• System Message Indicator: Appears
when a problem is detected. A system
message on the multi-information display
appears at the same time.
2 Multi-Information Display Warning
and Information Messages P. 94
•Lane Departure Warning: When your
vehicle is too close to the traffic lane lines,
the lane departure warning appears.
2 Lane Keeping Assist System (LKAS)
P. 421
• Head-up Warning Lights:
Flash when the BRAKE message appears
on the multi-information display.
2 Collision Mitigation Braking SystemTM
(CMBSTM) P. 458
Come on when the BRAKE message
appears on the multi- information display.
2Adaptive Cruise Control (ACC) with
Low Speed Follow (LSF) P. 402
Lane Departure Warning
System Message Indicator
19 ACURA RLX HYBRID CSS-31TY36500.book 120 ページ ２０１８年３月７日 水曜日 午後４時１９分
Page 153 of 609
152
Controls
Operating the Switches Around the Steering Wheel
POWER Button
■Changing the Power Mode1POWER Button
POWER Button Operating Range
You can start the power system when the keyless
access remote is inside the vehicle.
The power system may also start if the keyless access
remote is close to a door or window, even if it is
outside the vehicle.
ON mode:
The button is on (in red), if the power system is on.
If the battery of the keyless access remote is getting
low, the power system may not start when you press
the POWER button. If the power system does not
start, refer to the following link. 2 If the Keyless Access Remote Battery is
Weak P. 560
Do not leave the power mode in ACCESSORY or ON
when you get out.
Operating RangeVEHICLE OFF (LOCK)
The button is off.
The power to all electrical components is turned
off.
Press the button.
Without pressing
the brake pedal ACCESSORY
The button blinks (in red).
Operate the audio system and other accessories in
this position.
ON
The button blinks (in red).
All electrical components can be used.
19 ACURA RLX HYBRID CSS-31TY36500.book 152 ページ ２０１８年３月７日 水曜日 午後４時１９分
