2019.75 VAUXHALL GRANDLAND X bulb

[x] Cancel search: bulb

Page 93 of 271

VAUXHALL GRANDLAND X 2019.75  Owners Manual Instruments and controls91Retrieving service information
To retrieve the status of the service
information at any time press button
CHECK . The service information is
displayed for a few seconds.
Serv

Page 193 of 271

VAUXHALL GRANDLAND X 2019.75  Owners Manual Driving and operating191Trailer hitch
General information
Only use towing equipment that has
been approved for your vehicle. If
using non-factory fitted towing
equipment, deactivation of the hands- fr

Page 198 of 271

VAUXHALL GRANDLAND X 2019.75  Owners Manual 196Vehicle careVehicle careGeneral Information...................196
Accessories and vehicle modifications .......................... 196
Vehicle storage ........................198
End-of-life vehicl

Page 207 of 271

VAUXHALL GRANDLAND X 2019.75  Owners Manual Vehicle care205Within one minute after switching off
ignition, operate the wiper lever to
position the wiper blades vertically on
the windscreen.
Lift the wiper arm until it stays in the
raised positi

Page 208 of 271

VAUXHALL GRANDLAND X 2019.75  Owners Manual 206Vehicle care
High beam (1) inner bulb.
Low beam ( 2) outer bulb.
High beam (1)
1. Remove the protective cover by pulling the tab.
2. Press retaining clip downwardsand pull the bulb socket toward
th

Page 209 of 271

VAUXHALL GRANDLAND X 2019.75  Owners Manual Vehicle care207
2. Press retaining clip upwards andpull the bulb socket toward the
rear.
3. Detach the bulb from the bulb socket and replace the bulb.
4. Insert the bulb socket into the reflector hous

Page 210 of 271

VAUXHALL GRANDLAND X 2019.75  Owners Manual 208Vehicle care
2. Slacken the lamp fixing nut usinga box spanner or socket.
To avoid losing the nut if it drops
into the wing trim, first place a
cloth below it.
3. Manually unscrew and remove the la

Page 211 of 271

VAUXHALL GRANDLAND X 2019.75  Owners Manual Vehicle care209
Turn light (2)
8. Insert the bulb socket into the light
assembly. Fit the light assembly in the recess and tighten the lamp
fixing nut from the inside. Attach
the cover.
Light assembly
Page:   1-8 9-16 next >