2018 YAMAHA YXZ1000R SS headlights

Axle boots .......................................... 8-36
Checking the spark plugs .................. 8-37
Air filter maintenance.......................... 8-38
Cleaning the air filter case check hoses ................................................ 8-42
Cleaning the spark arrester ................ 8-43
Valve clearance .................................. 8-45
Brakes ................................................ 8-45
Checking the front and rear brake pads.................................................. 8-45
Checking the parking brake pads ...... 8-46
Checking the brake and YCC-S
clutch fluid levels .............................. 8-46
Brake and YCC-S clutch fluid
replacement...................................... 8-48
YCC-S clutch ..................................... 8-48
Checking the brake pedal .................. 8-49
Checking the accelerator pedal ......... 8-49
Parking brake lever free play adjustment........................................ 8-50
Brake light switch ............................... 8-51
Cable inspection and lubrication........ 8-51
Pedal lubrication................................. 8-52 Checking the stabilizer bushes...........8-52
Upper and lower arm pivot
lubrication (left and right) ..................8-53
Rear knuckle upper and lower pivot lubrication (left and right) ..................8-54
Drive shaft universal joint lubrication .........................................8-54
Steering shaft lubrication....................8-54
Wheel removal ....................................8-55
Checking and tightening the bead lock (YXZ10YESJ) .............................8-55
Tire replacement .................................8-56
Wheel installation................................8-57
Battery ................................................8-57
Jump-starting .....................................8-61
Fuse replacement ...............................8-63
Headlights...........................................8-65
Headlight beam adjustment ...............8-65
Tail/brake light ....................................8-66
Interior lights (for equipped models) ...8-66
Troubleshooting ..................................8-66
Troubleshooting charts .......................8-68
UB0F7AE0.book Page 3 Monday, November 6, 2017 2:30 PM

4-20
4
EBU35471Light switch “ / / ”Set the switch to “ ” to turn on the low
beam and the taillight.
Set the switch to “ ” to turn on the high
beam and the taillight.
Set the switch to “ ” to turn off the head-
lights and taillight.NOTICEECB02061Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the pointthat the electric starter will not have
enough power to crank the engine. If this
should happen, remove the battery and re-
charge it.
EBU36942Interior light switch “ ” (for equipped
models)Push the upper side (a) of the interior light
switch to turn on the interior lights and push
the lower side (b) of the switch to turn off the
lights.
1. Light switch “ / / ”
L
H
1
L
HLH
1. Interior light
1
UB0F7AE0.book Page 20 Monday, November 6, 2017 2:30 PM

4-55
4
Do not deform or damage the cylinders
in any way. Cylinder damage will result in
poor damping performance.
 Do not dispose of a damaged or worn
out shock absorber assembly yourself.
Take the shock absorber assembly to a
Yamaha dealer for any service. EBU35053Auxiliary DC jack
This model has an auxiliary DC jack located at
the left side of the glove compartment. A 12-
V accessory with the proper plug, such as a
radio or smartphone charger, can be used
when the engine is running and the headlights
are off.
1. Start the engine. (See page 6-2.)
2. Turn the headlights off. (See page 4-20.)
3. Open the auxiliary DC jack cap.
4. Turn the accessory off.
5. Insert the accessory power plug.
6. Turn the accessory on.TIP When inserting or removing the accessory
power plug, turn the accessory off.
 When the auxiliary DC jack is not being
used, cover it with the cap.
1. Auxiliary DC jack cap
2. Auxiliary DC jack
2
1
Auxiliary DC jack maximum capacity:
10 A (120 W)
UB0F7AE0.book Page 55 Monday, November 6, 2017 2:30 PM

8-65
8
4. Turn the key to “ ” (on) and turn on theelectrical circuit in question to check if
the device operates. If the fuse blows
again immediately, have a Yamaha dealer
check the electrical system.
5. Install the panel.EBU35261HeadlightsThis model is equipped with LED headlights.
There are no user replaceable bulbs. If one or
more headlights do not come on, check for a
loose connection, check the headlight fuse,
and then have a Yamaha dealer check the ve-
hicle.TIP When the headlights are set to low beam,
only the top half of each lamp will illuminate.
 When the headlights are set to high beam,
both halves of each lamp will illuminate.
EBU32681Headlight beam adjustmentNOTICEECB00691It is advisable to have a Yamaha dealer
make this adjustment. To raise the beam, turn the headlight beam
adjusting screw in direction (a).
To lower the beam, turn the headlight beam
adjusting screw in direction (b).1. Headlight beam adjusting screw
(a)
(b)
1
UB0F7AE0.book Page 65 Monday, November 6, 2017 2:30 PM

12-2
12
HHalf clutch indicator light ............................................... 4-6
Headlight beam, adjusting ........................................... 8-65
Headlights .................................................................... 8-65
Helmet indicator light ..................................................... 4-9
High beam indicator light ............................................... 4-3
Hood ............................................................................ 8-11IIdentification number records ...................................... 11-1
Indicator lights and warning lights ................................. 4-2
Instruments, lights and switches, Pre-operation check ........................................................................... 5-8
Interior lights (for equipped models) ............................ 8-66
Interior light switch (for equipped models) .................. 4-20JJump-starting .............................................................. 8-61LLabel locations ............................................................... 1-1
Launch system indicator light ........................................ 4-7
Launch system operation .............................................. 6-7
Light switch .................................................................. 4-20
Loading ........................................................................ 6-12MMain switch .................................................................... 4-1
Maintenance and lubrication chart ................................ 8-6
Maintenance chart, emission control system ................ 8-4
Maintenance charts ....................................................... 8-4
Model label .................................................................. 11-1
Multi-function meter unit ............................................. 4-10NNeutral indicator light ..................................................... 4-2
OOwner’s Manual and tool kit .......................................... 8-2PPanels .......................................................................... 8-11
Parking ......................................................................... 6-12
Parking brake indicator light .......................................... 4-3
Parking brake lever ...................................................... 4-23
Parking brake lever free play, adjusting ...................... 8-50
Parking brake pads, checking ..................................... 8-46
Passenger handhold, Pre-operation check ................... 5-7
Pedal, lubrication ......................................................... 8-52RRear knuckle upper and lower pivot, lubrication ......... 8-54
Rearview mirror (for equipped models) ....................... 4-29
Reverse indicator light ................................................... 4-2SSafety information .......................................................... 2-1
Seat belt indicator light .................................................. 4-9
Seat belts ..................................................................... 4-29
Seat belts, Pre-operation check .................................... 5-7
Seats ............................................................................ 4-26
Shifting and reverse driving ........................................... 6-3
Shift timing indicator light .............................................. 4-4
Shock absorbers, front ................................................ 4-34
Shock absorbers, rear ................................................. 4-44
Spark arrester, cleaning ............................................... 8-43
Spark plugs, checking ................................................. 8-37
Specifications .............................................................. 10-1
Stabilizer bushes, checking .......... ............................... 8-52
Starting the engine ........................................................ 6-2
Steering, Pre-operation check ....................................... 5-7
UB0F7AE0.book Page 2 Monday, November 6, 2017 2:30 PM