2018 VAUXHALL CORSA F engine

[x] Cancel search: engine

Page 93 of 271

VAUXHALL CORSA F 2018  Owners Manual Instruments and controls91Flashes
A turn signal or the hazard warning
flashers are activated.
Rapid flashing: failure of a turn signal light or associated fuse.
Bulb replacement  3 199, Fuses
3  207.

Page 94 of 271

VAUXHALL CORSA F 2018  Owners Manual 92Instruments and controlsDeployment of the belt pretensioners
or airbags is indicated by continuous
illumination of  v.9 Warning
Have the cause of the fault
remedied immediately by a
workshop.
Belt p

Page 95 of 271

VAUXHALL CORSA F 2018  Owners Manual Instruments and controls93Brake and clutch systemR  illuminates red.
The brake and clutch fluid level is too low, when manual parking brake is
not applied  3 196.9 Warning
Stop. Do not continue your
j

Page 96 of 271

VAUXHALL CORSA F 2018  Owners Manual 94Instruments and controlsUltrasonic parking assistr  illuminates yellow.
Fault in system
or
Fault due to sensors that are dirty or covered by ice or snow
or
Interference due to external sources of ul

Page 97 of 271

VAUXHALL CORSA F 2018  Owners Manual Instruments and controls95Tyre pressure monitoringsystem
w  illuminates or flashes yellow.
Illuminates
Tyre pressure loss. Stop immediately
and check tyre pressure.
Flashes
Fault in system or tyre wit

Page 98 of 271

VAUXHALL CORSA F 2018  Owners Manual 96Instruments and controlsThe engine power is limited. Consult
a workshop.
Autostop
Autostop active D  illuminates red or white.
Engine is in an Autostop.
Stop-start system  3 137.
Exterior light 8  i

Page 101 of 271

VAUXHALL CORSA F 2018  Owners Manual Instruments and controls99On vehicles with LPG engines:
Average consumption is indicated for
the currently selected mode, LPG or
petrol.
Average vehicle speed
Display of average speed. The
measurement

Page 102 of 271

VAUXHALL CORSA F 2018  Owners Manual 100Instruments and controlsUnit
Press  SET/CLR  while page is
displayed. Select imperial (unit 1) or
metric (unit 3) by turning the adjuster
wheel. Press  SET/CLR to set the unit
of measurement.
Speed
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 49-56 ... 112 next >