2018 TOYOTA YARIS iA Wrench indicator

158
YARIS iA_OM_OM99Q46z_(U)
3-2. Combination Meter and Display
These lights turn on or flash to notify the user of the system operation
status or a system malfunction.
*1: The light turns on when the ignition is switched on for an operation chec\
k, and turns off a few seconds later or when the engine is started. If the light
does not turn on or remains turned on, have the vehicle inspected at your
Toyota dealer.
Indicator Lights
(Green)
KEY Indicator Light
(→P. 142) Headlight High-Beam
Indicator Light
(
→P. 176, 176)
*1
(If equipped)
Wrench Indicator Light
(→P. 159) Turn Signal/Hazard
Warning Indicator Lights
(
→P. 180, 186)
*1TCS/DSC Indicator
Light ( →P. 195, 197)*1Security Indicator Light
(→P. 121)
*1DSC OFF Indicator Light
(→P. 197)
(Amber)
(If equipped)
Cruise Main Indicator
Light ( →P. 214)
*1
(Red)
(If equipped)
Smart City Brake
Support (SCBS)
Indicator Light ( →P. 209)
(Green)
(If equipped)
Cruise Set Indicator
Light (→P. 214)
*1
(If equipped)
Smart City Brake
Support (SCBS) OFF
Indicator Light ( →P. 210)
(If equipped)
Select Mode Indicator
Light (→P. 202)
(Blue)
Low Engine Coolant
Temperature Indicator
Light (→P. 159) Lights-On Indicator Light
(
→P. 175)
(If equipped)
Shift Position Indication
(→P. 165)*1Front Passenger
Air Bag Deactiva-
tion Indicator
Light ( →P. 78)

YARIS iA_OM_OM99Q46z_(U)
1593-2. Combination Meter and Display
3
When Driving
When the ignition is switched ON,
the wrench indicator light is illumi-
nated and then turns off after a
few seconds.
The wrench indicator light is illu-
minated when the preset mainte-
nance period arrives. Verify the
content and perform mainte-
nance.
Refer to Maintenance Monitor on
P. 414.
The light illuminates continuously
when the engine coolant tempera-
ture is low and turns off after the
engine is warm.
If the low engine coolant tempera-
ture indicator light remains illumi-
nated after the engine has been
sufficiently warmed up, the tem-
perature sensor could have a mal-
function. Consult your Toyota
dealer.
Wrench Indicator Light
Low Engine Coolant Temperat ure Indicator Light (Blue)

414
YARIS iA_OM_OM99Q46z_(U)
5-2. Scheduled Maintenance
Maintenance Monitor
Based on the engine operating conditions, the onboard computer in
your vehicle calculates the remaining oil life in the United States and
Puerto Rico. The wrench indicator light in the instrument cluster will
be illuminated when remaining oil life becomes less than 600 miles
(1000 km), or remaining days are less than 15 (whichever comes
first). The system must be rese t whenever replacing the engine oil.
■Reset method
Press and hold the dashboard
illumination knob with the igni-
tion switched off, then switch it
on. Keep pressing the dash-
board illumination knob for
more than 5 seconds. The mas-
ter warning light will flash for a
few seconds when the reset is
completed.
Select the icon on the home screen to display the “Applica-
tions” screen.
Select “Vehicle Status Monitor”.
Select “Maintenance” to display the maintenance list screen.
Switch the tab and select the se tting item you want to change.
Maintenance Monitor (Type A audio)
Dashboard illumination knob
Maintenance Monitor (Type B audio)
1
2
3
4

YARIS iA_OM_OM99Q46z_(U)
4155-2. Scheduled Maintenance
5
Maintenance and Care
You can customize settings in the setup display as follows:
Ta bItemExplanation
Scheduled
SettingNotification can be switched on/off.
Time (months)
Displays the time or distance until main-
tenance is due.
Select this item to set the maintenance
period.
The wrench indication/indicator light in
the instrument cluster will be illuminated
when the remaining distance is less than
600 miles or 1000 km, or the remaining
number of days is less than 15 (which-
ever comes first).
Distance
(mile or km)
Reset
Resets the time and distance to the initial
values.
Once the system turns on, it needs to be
reset whenever carrying out mainte-
nance.
Tire Rotation
SettingNotification can be switched on/off.
Distance
(mile or km)
Displays the distance until tire rotation
is due.
Select this item to set the tire rotation
distance.
The wrench indication/indicator light in
the instrument cluster will be illumi-
nated when the remaining distance is
less than 600 miles or 1000 km.
Reset
Resets the remaining distance to the
initial value.
Once the system turns on, it needs to
be reset whenever rotating the tires.

4165-2. Scheduled Maintenance
YARIS iA_OM_OM99Q46z_(U)
Oil Change
Setting Inter-
val
Oil replacement period can be selected
from the flexible setting or fixed setting,
or it can be set to non-display.
The flexible setting is available only in the
United States and Puerto Rico. Once
engine oil flexible maintenance is
selected, the vehicle calculates the
remaining oil life based on the engine
operating conditions. The vehicle lets you
know when an oil change is due by illumi-
nating the wrench indicator light in the
instrument cluster.
Distance (mile
or km)
Displays the distance until the oil replace-
ment is due.
Select this item to set the oil replacement
distance.
The wrench indication/indicator light in
the instrument cluster will be illuminated
when the remaining distance is less than
600 miles or 1000 km.
Reset
Resets the remaining distance until oil
replacement is due to the initial value.
Once the system turns on, it needs to be
reset whenever replacing the engine oil.
Ta bItemExplanation

YARIS iA_OM_OM99Q46z_(U)
4235-3. Owner Maintenance
5
Maintenance and Care
After replacing the engine oil, have a repair shop such as your Toyota
dealer perform the initialization (engine oil data resetting) of the
recorded value. If the value recorded by the computer is not initialized,
the wrench indicator light may not turn off or it may turn on earlier than
normal.
● This procedure is intended for vehicles with the engine oil flexible mainte-
nance setting selected.
● The initialization (engine oil data resetting) of the recorded value can be per-
formed using the following procedure:
Switch the ignition OFF.
Vehicle Engine Control Unit Reset Procedure
Switch the ignition ON with the selec-
tor pressed, and press and hold the
selector for about 5 seconds until the
master warning light flashes.
After the master warning light
flashes for several seconds, the ini-
tialization is completed.
1
2
3
Selector

572Alphabetical index
YARIS iA_OM_OM99Q46z_(U)
Exhaust Gas ............................. 109
Exterior Care ............................ 462Aluminum Wheel Maintenance ....................... 468
Bright-Metal Maintenance ..... 467
Maintaining the Finish ........... 464
Plastic Part Maintenance ...... 469
Flasher Hazard warning..................... 186
Headlights ............................. 175
Flat Tire..................................... 477 Mounting the Spare Tire ....... 487
Removing a Flat Tire ............ 483
Floor Mat .................................. 128
Fluid Brake/Clutch ......................... 428
Washer ................................. 429
Fluids
Classification......................... 557
Fog Lights ................................ 179
Foot Brake ................................ 187
Front Seat ................................... 21
Fuel Filler lid and cap.................... 110
Gauge ................................... 151
Requirements ....................... 107
Tank capacity........................ 557
Fuel Consumption Display ..... 200
Fuel Economy Monitor ............ 199
Ending display ...................... 200
Fuel consumption display ..... 200
Fuses ........................................ 455 Panel description .................. 458
Replacement......................... 455
Gauges ..................................... 148
Glove Compartment ................ 408 Hazard Warning Flasher ......... 186
Hazardous Driving................... 127
Head Restraint ........................... 27
Headlights
Coming home light................ 177
Control .................................. 175
Flashing ................................ 176
High-low beam...................... 176
Leaving home light ............... 177
Hill Launch Assist (HLA) ........ 191
Hood Release........................... 419
Horn .......................................... 112
If a Warning Light Turns On or Flashes ........................ 501
Ignition
Switch ................................... 140
Ignition not switched off (STOP) warning beep............ 516
Illuminated Entry System ....... 402
Immobilizer System................. 120
Indicator Lights ....................... 158 Low engine coolant temperature ........................ 159
Wrench ................................. 159
Inside Trunk Release Lever .... 105
Inspecting Brake/Clutch
Fluid Level ............................. 428
Inspecting Coolant Level ........ 425
Inspecting Engine Oil Level ... 424
Inspecting Washer Fluid Level ....................................... 429
F
G
H
I