2018 TOYOTA RAV4 reset

22
OVERVIEW
Instrument panel
Steering wheel controls
Voice command
switch2
Tilt and telescopic
steering lock release lever
Audio control
switches2
Paddle shift switches1
Multi-Information Display
(MID) controls1
Dynamic Radar Cruise
Control (DRCC) vehicle-
to-vehicle distance
button
Dynamic Radar Cruise
Control (DRCC) or Cruise
control switch
Hood lock release lever Headlight, turn signal, fog light
1 and
Auto High Beam (AHB) controls
Fuel tank door release lever
Power Liftgate main switch1
All-wheel drive (AWD) lock switch
Lane Departure Alert
(LDA) switch
Tire Pressure Monitoring (warning)
System (TPMS) reset switch1
Instrument panel
light control dial
Outside rear view
mirror switches
Heated steering
wheel switch1
Windshield wiper and washer controls
Instrument cluster

14
FEATURES & OPERATIONS
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
1. When the liftgate reaches the desired height, push the rear liftgate close-button
(on the door jam of the liftgate) once. Press and hold the button until the buzzer
sounds.
2. To reset the height, with the liftgate open and not moving, press and hold the
rear liftgate close-button until it buzzer sounds 4 times, and continue to hold until
it buzzes again -then let go. Push the same button to close the liftgate. When you
next open the liftgate it will open to the maximum height.
3. To set the height using the Multi-Information Display, press
or meter control
switches and select
from the MID. Press or and select and
then press
. Select Opening Adjustment, then press . Select desired
position (5 height options to choose from,) then press
.
NOTE: If the liftgate has stopped operating, check inside the glove box, on the
left side, to ensure the PWR DOOR OFF button has not been pushed.
For more details, see Owner’s Manual.
To automatically open/close Power Liftgate Put your foot near the lower center
part of the rear bumper for less than 2-seconds to trigger sensor. To operate, make
sure that the touchless sensor operation is enabled and that you are carrying the
remote.
Door-Power Liftgate (if equipped)
Instrument panel
Power Liftgate (back door)
Touchless Power Liftgate (if equipped)
Open: Push and hold
Close: Push and hold again
(open only)
Sensor area
(close only)
Carry remote
Smart key feature
PROGRAMMABLE POWER LIFTGATE

Push MID control switches to view or change information in the following:
Drive information
Navigation system linked display (if equipped)
Audio system-linked display
Driving assist information (if equipped)
Warning messages
Settings display
19
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Refer to the Owner’s Manual for more information.
NOTE: Designed for car accessories. Engine switch must be in the “ACC” or
“ON” position to be used.
Power outlets-12V DC & 120V AC
12V DC - Front12V DC - Rear
120V AC (if equipped)
Multi-Information Display (MID)
Enter/Set:
Press to enter/set,
press and hold to
reset
Return to previous screen
“” and “” Press to select an item/change
pages

30
ADJUSTING LDA ALERT SENSITIVITY
TOYOTA SAFETY SENSE™
THE SWAY WARNING SYSTEM (SWS) FUNCTION
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To help prevent
swaying, the system alerts the driver using a buzzer sound and a warning displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
DISABLING THE STEERING ASSIST FUNCTION
(1) Press “” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches to find the steering assist function and then press “” to
select. You can press “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of ignition cycle until changed by the driver or the
system is reset.
(1) Press “
” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches to find the alert sensitivity setting and then press “” to
select. You can press “
” to go back to the menu. The driver can adjust the sensitivity of the LDA (warning) function from the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front tire crosses the
lane marker.
Normal - Is designed to warn approximately when the front tire crosses
the lane marker.

31
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Dynamic Radar Cruise Control (DRCC)
TURNING SYSTEM ON/OFF
(1)
Note: If DRCC is turned off and
you hold the ON-OFF button for
at least 1.5 seconds, the system
switches to constant speed
control mode.
DISABLING THE LDA SWAY WARNING SYSTEM
ADJUSTING SWAY ALERT SENSITIVITY
DRCC helps maintain a pre-set distance to a preceding vehicle when the preceding
vehicle is traveling at a lower speed. This mode is always selected first when the
cruise control button is depressed. Constant speed cruise control mode is also
available. (1) Press “
” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches to find the sway warning function and then press “” to
select. You can press “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of ignition cycle until changed by the driver or the
system is reset.
(1) Press “
” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches to find the sway warning function and then press “” to
select. You can press “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of ignition cycle until changed by the driver or the
system is reset.
DisplaySet speed
Indicators
Dynamic Radar
Cruise Control
vehicle-to-vehicle
distance button
Cruise control switch

36
System reset initialization
1. Push and hold “
SET” button
until the indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete.
Seat belts
SAFETY & EMERGENCY FEATURES
Keep as low on
hips as possible
Take up slack
127(,IDSDVVHQJHU