2018 TOYOTA PRIUS V high beam

3
1
9 8
7
6 4 3
2
PRIUS v_OM_OM47B78U_(U)
10
5
3-4. Adjusting the steering wheel and mirrors
Steering wheel .................. 140
Inside rear view mirror....... 142
Outside rear view mirrors ............................. 144
3-5. Opening and closing the windows
Power windows ................. 146
4-1. Before driving Driving the vehicle ............. 150
Cargo and luggage............ 161
Vehicle load limits ............. 165
Trailer towing..................... 166
Dinghy towing.................... 167
4-2. Driving procedures Power (ignition) switch ...... 168
EV drive mode................... 173
Hybrid transmission........... 175
Turn signal lever................ 180
Parking brake .................... 181 4-3. Operating the lights
and wipers
Headlight switch ................ 182
Automatic High Beam ........ 185
Fog light switch .................. 191
Windshield wipers and washer ............................. 192
Rear window wiper and washer ............................. 194
4-4. Refueling Opening the fuel tank cap................................... 195
4-5. Using the driving support systems
Toyota Safety Sense P ...... 198
PCS (Pre-Collision System) ........................... 205
LDA (Lane Departure Alert with steering control) ....... 217
Dynamic radar cruise control.............................. 227
Rear view monitor system ............................. 241
Driving mode select switch .............................. 251
Driving assist systems ....... 252
4-6. Driving tips Hybrid vehicle driving tips ................................... 259
Winter driving tips .............. 262
4Driving

20Pictorial index
PRIUS v_OM_OM47B78U_(U)
■Switches
Outside rear view mirror switches . . . . . . . . . . . . . . . . . . . . P. 144
Window lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 146
Door lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 116
Power window switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 146
Instrument panel light control dial . . . . . . . . . . . . . . . . . . . . . P. 92
LDA (Lane Departure Alert with steering control)
switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . . . P. 217
Automatic High Beam switch . . . . . . . . . . . . . . . . . . . . . . . . P. 185
VSC OFF switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 2541
2
3
4
5
6
7
8

88
PRIUS v_OM_OM47B78U_(U)
2. Instrument cluster
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
(P. 180)*1, 2
Slip indicator ( P. 253)
Tail light indicator
( P. 182) EV drive mode indicator
(
P. 173)
Headlight high beam
indicator (P. 183) Shift position indicators
(
P. 175)
Fog light indicator
( P. 191)
*1, 3PCS warning light
( P. 209)
Security indicator
( P. 8 3 )
*4
“PASSENGER AIR
BAG” indicator ( P. 53)
“READY” indicator
( P. 168)
“ECO MODE”
indicator (P. 251) VSC OFF indicator
(
P. 254)
“PWR MODE” indicator
( P. 251)
(Green)
LDA indicator ( P. 221)
Cruise control indicator
( P. 227) Steering control
indicator (
P. 222)
Radar cruise control
indicator (P. 227) Automatic High Beam
indicator (
P. 185)
Cruise control “SET”
indicator (P. 227)

149
PRIUS v_OM_OM47B78U_(U)
4Driving
4-1. Before drivingDriving the vehicle ............. 150
Cargo and luggage ........... 161
Vehicle load limits ............. 165
Trailer towing..................... 166
Dinghy towing ................... 167
4-2. Driving procedures Power (ignition) switch ...... 168
EV drive mode .................. 173
Hybrid transmission........... 175
Turn signal lever................ 180
Parking brake .................... 181 4-3. Operating the lights
and wipers
Headlight switch ................ 182
Automatic High Beam ....... 185
Fog light switch ................. 191
Windshield wipers and washer ............................ 192
Rear window wiper and washer ............................ 194
4-4. Refueling Opening the fuel tank cap .................................. 195
4-5. Using the driving support systems
Toyota Safety Sense P ..... 198
PCS (Pre-Collision System) ........................... 205
LDA (Lane Departure Alert with steering control) ....... 217
Dynamic radar cruise control ............................. 227
Rear view monitor system ............................ 241
Driving mode select switch .............................. 251
Driving assist systems ...... 252
4-6. Driving tips Hybrid vehicle driving tips .................................. 259
Winter driving tips ............. 262

PRIUS v_OM_OM47B78U_(U)
1834-3. Operating the lights and wipers
4
Driving
With the headlights on, push
the lever away from you to turn
on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with the headlights on or off.
■Daytime running light system
●Vehicles with halogen headlights: The daytime running lights illuminate
using the same lights as the high beam lights and illuminate dimmer than
the high beam lights.
● Vehicles with LED headlights: The daytime running lights illuminate using
the same lights as the headlights and illuminate dimmer than the headlights.
● To make your vehicle more visible to other drivers during daytime driving,
the daytime running lights turn on automatically when all of the following
conditions are met. (The daytime running lights are not designed for use at
night.)
• The hybrid system is operating
• The parking brake is released
• The headlight switch is in the , or “AUTO”
* position
*: When the surroundings are bright
The daytime running lights remain on after they illuminate, even if the park-
ing brake is set again.
● Compared to turning on the headlights, the daytime running light system
offers greater durability and consumes less electricity, so it can help improve
fuel economy.
■ Headlight control sensor (if equipped)
Turning on the high beam headlights
1
2
The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the
windshield.
Doing so interferes with the sensor
detecting the level of ambient light and
may cause the automatic headlight sys-
tem to malfunction.
Air conditioning operation may also be
interrupted.

185
PRIUS v_OM_OM47B78U_(U)
4-3. Operating the lights and wipers
4
Driving
Automatic High Beam
Push the lever away from you
with the headlight switch in
or position.
Press the Automatic High
Beam switch.
The Automatic High Beam indica-
tor will come on when the head-
lights are turned on automatically
to indicate that the system is
active.
The Automatic High Beam uses an in-vehicle camera sensor to
assess the brightness of streetlights, the lights of oncoming and
preceding vehicles, etc., and automatically turns high beam on
or off as necessary.
Activating the Automatic High Beam system
1
2

186
PRIUS v_OM_OM47B78U_(U)
4-3. Operating the lights and wipers
When all of the following conditions are fulfilled, high beam will be
automatically turned on (after approximately 1 second):
●Vehicle speed is above approximately 21 mph (34 km/h).
● The area ahead of the vehicle is dark.
● There are no oncoming or preceding vehicles with headlights or tail
lights turned on.
● There are few streetlights on the road ahead.
If any of the following conditions are fulfilled, high beam will be auto-
matically turned off:
● Vehicle speed drops below approximately 17 mph (27 km/h).
● The area ahead of the vehicle is not dark.
● Oncoming or preceding vehicles have headlights or tail lights
turned on.
● There are many streetlights on the road ahead.
High beam automatic turning on or off conditions

PRIUS v_OM_OM47B78U_(U)
1874-3. Operating the lights and wipers
4
Driving
■Switching to low beam
Pull the lever to original posi-
tion.
The Automatic High Beam indi-
cator will turn off.
Push the lever away from you to
activate the Automatic High
Beam system again.
■
Switching to high beam
Press the Automatic High
Beam switch.
The Automatic High Beam indi-
cator will turn off and the high
beam indicator will turn on.
Press the switch to activate the
Automatic High Beam system
again.
Turning the high beam on/off manually