Page 4 of 308
4
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16     11:18
For  safety  reasons,  this  manual  indicates  items  requiring  particular  attention
with the following marks.
IMPORTANT INFORMATION ABOUT THIS MANUAL
WA R N I N G
● This  is  a  warning  against  anything  which  may  cause  injury  to  pe ople  if  the  warning  is
ignored. You are informed about what you must or must not do in  order to reduce the risk
of injury to yourself and others.
NOTICE
● This is a warning against anything which may cause damage to the vehicle or its equip-
ment if the warning is ignored. You are informed  about what you must or must not do in
order to avoid or reduce the risk of damage to your vehicle and  its equipment.
SYMBOLS USED IN ILLUSTRATIONS
Safety symbol
The symbol of a circle with a slash through it means “Do not”,  “Do not do
this” or “Do not let this happen”.
Arrows indicating operations
Indicates  the  action  (pushing,  turning,
etc.)  used  to  operate  switches  and  other
devices. 
         
        
        
     
        
        Page 95 of 308
95
2. RADIO OPERATION
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.11.06     15:06
AUDIO SYSTEM
3
WA R N I N G
●FCC WARNING: Changes or modifications in construction not expre ssly approved by the
party  responsible  for  compliance  could  void  the  user’s  authorit y to operate the equip-
ment.
● Radio frequency exposure.
This  device  is  approved  for  Mobile Application  only  and,  to  com ply  with  applicable  FCC
radio  frequency  exposure  regulations,  must  be  used  with  a  distance  of  at  least  7.9  in.
(20cm) between the antenna and the body of any person at all ti me during use.
NOTICE
●THIS DEVICE COMPLIES WITH PART15 OF THE FCC RULES.
● OPERATION IS SUBJECT TO THE  FOLLOWING TWO CONDITIONS,
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
2)  THIS  DEVICE  MUST  ACCEPT  ANY  INTERFERENCE  RECEIVED,  INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 
         
        
        
     
        
        Page 96 of 308

96
2. RADIO OPERATION
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.11.06     15:06
HOW TO SUBSCRIBE TO AN 
XM Satellite Radio
To  listen  to  a  satellite  radio  broadcast
in the vehicle, a subscription to the XM
Satellite Radio service is necessary.
An  XM  Satellite  Radio  is  a  tuner  de-
signed  exclusively  to  receive  broad-
casts  provided  under  a  separate
subscription.  Availability  is  limited  to
the  48  contiguous  U.S.  states  and
some Canadian provinces.
HOW TO SUBSCRIBE
It is necessary to enter into a separate
service  agreement  with  XM  Satellite
Radio  in  order  to  receive  satellite
broadcast programming in the vehicle.
Additional  activation  and  service  sub-
scription fees apply that are not includ-
ed in the purchase price of the vehicle
and digital satellite tuner.
 For  complete  information  on  subscrip-
tion  rates  and  terms,  or  to  subscribe  to
XM Satellite Radio:
U.S.A.
Refer to www.siriusxm.com
 or call 
1-877-447-0011.
 Canada
Refer to www.siriusxm.ca
 or call 
1-877-438-9677.
NOTICE
● XM Radio Services  Legal Disclaimers
and Warnings
• Fees  and  Taxes  Subscription  fee,
taxes,  one  time  activation  fee,  and
other  fees  may  apply.  Subscription  fee
is  consumer  only.  All  fees  and  pro-
gramming subject to change.
Subscriptions  subject  to  Customer
Agreement available at 
www.siriusxm.com
 (U.S.A.) or 
www.siriusxm.ca  (Canada)  XM  ser-
vice only available in the 48 contiguous
United States and Canada*.
*Canada    some  deterioration  of  ser-
vice may occur in extreme northern lat-
itudes.  This  is  beyond  the  control  of
XM Satellite Radio.
Explicit  Language  Notice  Channels
with frequent explicit language are indi-
cated with an “XL” preceding the chan-
nel  name.  Channel  blocking  is
available for XM Satellite Radio receiv-
ers by notifying XM at;
U.S.A. Customers:
Visit www.siriusxm.com
 or calling 
1-877-447-0011
Canadian Customers:
Visit www.siriusxm.ca
 or calling 
1-877-438-9677 
         
        
        
     
        
        Page 259 of 308
259
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16     11:18
NAVIGATION SYSTEM
8
5. SETUP
1. DETAILED NAVIGATION SETTINGS
1Press the “MENU” button.
2Select “Settings” .
3Select “Navigation” .
4Select “Detailed Navi. Settings” .
5Select the items to be set.
6Select “OK”.
Settings are available for pop-up infor-
mation,  favorite  POI  categories,  low
fuel warning, etc.SCREENS FOR NAVIGATION 
SETTINGS 
         
        
        
     
        
        Page 260 of 308

260
5. SETUP
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16     11:18
1Display  the  “Detailed  Navi.  Settings”
screen. 
( P.259)
2Select  “Favorite POI Categories” .
3Select the category to be changed.
“Default”: Select to set the default catego-
ries.
4Select the desired POI category.
“List All Categories” : Select to display all
POI categories.
5Select the desired POI icon.
No.FunctionPage
Select to set the voice guid-
ance  for  the  next  street
name on/off.
Select to set IPD road guid-
ance on/off.
Select  to  set  favorite  POI
categories that are used for
POI selection to display on
the map screen.
260
Select to adjust the current
position  mark  manually  or
to  adjust  miscalculation  of
the distance caused by tire
replacement.
261
Select to set display of pop-
up information on/off.
Select to set display of low
fuel warning on/off.262
Select to set predictive effi-
cient drive on/off.
Select  to  reset  all  setup
items.
FAVORITE POI CATEGORIES 
(SELECT POI ICONS)
Up  to  6  POI  icons,  which  are  used  for
selecting POIs on the map screen, can
be selected as favorites. 
         
        
        
     
        
        Page 262 of 308

262
5. SETUP
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16     11:18
■TIRE CHANGE CALIBRATION
1Select “Tire Change” .
The  message  appears  and  the  quick  dis-
tance calibration starts automatically.
1Display  the  “Detailed  Navi.  Settings”
screen. 
( P.259)
2Select  “Low Fuel Warning Pop-up” .
■SEARCHING GAS STATION IN LOW
FUEL WARNING
1Select “Yes”  when  the  low  fuel  warn-
ing appears.
2Select the desired nearby gas station.
3Select  “Enter  ”   to  set  as  a  destina-
tion.
“Info” :  Select to  display gas station  infor-
mation. ( P.216)
The tire change calibration function will
be used when replacing the tires. This
function  will  adjust  miscalculation
caused  by  the  circumference  differ-
ence between the old and new tires.
INFORMATION
●If  this  procedure  is  not  performed  when
the  tires  are  replaced,  the  current  posi-
tion mark may be incorrectly displayed.
LOW FUEL WARNING POP-UP
When  the  fuel  level  is  low,  a  warning
message will pop up on the screen.
A  nearby  gas  station  can  be  selected
as a destination. 
         
        
        
     
        
        Page 263 of 308
263
5. SETUP
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16     11:18
NAVIGATION SYSTEM
8
2. TRAFFIC SETTINGS
1Press the “MENU” button.
2Select “Settings” .
3Select “Traffic” .
4Select the items to be set.
5Select “OK”.
Traffic  information  such  as  traffic  con-
gestion or traffic incident warnings can
be made available. SCREEN FOR TRAFFIC 
SETTINGS
No.Function
Select to set specific routes (such as
frequently  used  routes)  on  which
you  wish  to  receive  traffic  informa-
tion. ( P.265)
Select  to  set  the  avoid  traffic  func-
tion auto/manual. ( P.264)
Select  to  set  the  usage  of  traffic  in-
formation  for  the  estimated  arrival
time on/off.
Select to set the display of an arrow
of free flowing traffic on/off.
Select  to  set  to  on/off  whether  to
consider  the  predictive  traffic  infor-
mation ( P.219) with estimated ar-
rival  time  and  detoured  route
search.  
         
        
        
     
        
        Page 264 of 308
264
5. SETUP
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16     11:18
1Display  the  “Traffic  Settings”  screen.
(P.263)
2Select  “Avoid Traffic”.
3Select the desired item.
4Select “OK”.
Select to set of traffic incident voice
warning on/off.
Select to reset all setup items.
No.FunctionAUTO AVOID TRAFFIC
No.Function
Select  to  automatically  change
routes when congestion information
of  the  guidance  route  has  been  re-
ceived.
Select to select manually whether or
not  to  change  routes  when  conges-
tion  information  of  the  guidance
route  has  been  received.  In  this
mode, a screen will appear to ask if
you wish to reroute.
Select  to  not  reroute  when  conges-
tion  information  for  the  guidance
route has been received.