2018 TOYOTA PRIUS PRIME charging

21
1. BASIC FUNCTION
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16 11:18
QUICK GUIDE
1No.IndicatorsConditions
The condition of
the Bluetooth®
connection
(Gray) (Blue)
No connection Poor Good
 An antenna for the Bluetooth
® connection is built into the instru-
ment panel. The condition of the Bluetooth® connection may dete-
riorate and the system may not function when a Bluetooth® phone
is used in the following conditions and/or places:
The cellular phone is obstructed by certain objects (such as when
it is behind the seat or in the glove box or console box).
The cellular phone is touching or is covered with metal materia ls.
 Leave the Bluetooth
® phone in a place where the condition of the
Bluetooth® connection is good.
The level of re-
ception
Poor Excellent
 The level of reception does not always correspond with the leve l
displayed on the cellular phone. The level of reception may not be
displayed depending on the phone you have.
When the cellular phone is out of the service area or in a plac e
inaccessible by radio waves , “No Service” is displayed.
 “Rm” is displayed when receiving in a roaming area. While roam-
ing, display “Rm” top-left on the icon.
 The receiving area may not be displayed depending on the type o f
phone you have.
The amount of
battery charge
leftEmpty Full
 The amount displayed does not always correspond with the
amount displayed on the Bluetooth
® device.
The amount of battery charge left may not be displayed depend-
ing on the type of the Bluetooth
® device connected.
This system does not have a charging function.

108
3. MEDIA OPERATION
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16 11:18
INFORMATION
●When an iPod is connected using a genuine iPod cable, the iPod starts charging its bat-
tery.
● Depending on the iPod and the songs in the iPod, iPod cover art may be displayed. This
function can be changed to on/off. ( P.118) It may take time to display iPod cover art,
and the iPod may not be operated while the cover art display is in process.
● When an iPod is connected and the audio source is changed to iP od mode, the iPod will
resume playing from the same point it was last used.
● Depending on the iPod that is connected to the system, certain functions may not be
available.
● Files/tracks selected by operat ing a connected iPod may not be recognized or displayed
properly.
● If an iPhone is connected via Bluetooth
® and USB at the same time, system operation
may become unstable.
For known phone compatibility information, refer to http://www. toyota.com/entune/
.

211
1. BASIC OPERATION
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16 11:18
NAVIGATION SYSTEM
8
3. MAP SCREEN INFORMATION
1Select “Options” on the map screen.
2Select “Map Information” .
3Select the desired items to be dis-
played.
When set to on, the indicator will illumi-
nate.
1Display the “Map Information” screen.
(P.211)
2Select “Select POI”.
When the POI icons to be displayed on
the map screen have already been set,
“Change POI” is displayed.
3Select the desired POI category and
select “OK”.
DISPLAYING MAP
INFORMATION
Information such as POI icons, route
trace, speed limit, etc. can be dis-
played on the map screen.
No.FunctionPage
Select to display the select-
ed POI icons.
Select to select or change
POI icons.211
Select to display the predic-
tive efficient drive icons.213
Select to display route
trace.215
Select to display speed limit
icon.
Select to display traffic infor-
mation.218
Select to display charging
station POI.288
SELECTING THE POI ICONS
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen
Select to cancel the select-
ed POI icons.
Displays up to 6 POI icons
as favorite POI categories260
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
212
Select to search for the
nearest POIs.212

288
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16 11:18
3. EXCLUSIVELY FOR PLUG-IN HYBRID SYSTEM
1. PLUG-IN HYBRID APPLICATIONS
The following functions can be used with
the navigation system.
Download of nearby charging stations to
the map screen (Type A)
 View list of nearby charging stations and
corresponding charging station informa-
tion (such as voltage supported) (Type B)
For details about the function, refer to
http://www.toy ota.com/entune/.
POI icons of charging stations can be dis-
played on the map screen.
Their location can also be set as a destina-
tion and used for route guidance.
1Press the “MENU” button.
2Select “App Suite” .
3Select “Charge Station” to download
nearby charging stations.
 The screen shown above is only an exam-
ple. The actual screen may be different.
Plug-in Hybrid Applications is a service
for plug-in hybrid vehicles.
These are added to the Safety Con-
nect and Entune App Suite products.
The contents provide charge support,
comfort support and drive support via
the vehicle’s navigation system and
the owner’s Smartphone.
Both of the following accounts are re-
quired for the services.
Active Safety Connect account
 Active Toyota Entune App Suite account
For Safety Connect and Entune App
Suite, refer to the following page.
PLUG-IN HYBRID
APPLICATIONS OPERATION
DOWNLOAD OF NEARBY
CHARGING STATIONS TO THE
MAP SCREEN

289
3. EXCLUSIVELY FOR PLUG-IN HYBRID SYSTEM
PRIUS PRIME_Wide Navi_OM47C24U_(U)
17.10.16 11:18
Entune App Suite
9
4Select to display nearby charging
stations on the map screen.
1Select “Options”.
2Select “Map Information” .
3Select “Charging Station POI” to hide
or display the POI icons.
 When set to on, the indicator will illumi-
nate.
TO HIDE POI ICONS