2018 TOYOTA PRIUS PLUG-IN HYBRID power steering

3
1
9
8
7
6
5
4
2
PRIUS PHV_OM_OM47C99E_(EE)
3
3. Instrument cluster
Combination meter ............198
Warning lights and
indicators .........................207
Main display .......................215
Multi-information display ....223
Head-up display .................257
Energy monitor/
consumption screen ........264
4-1. Key information
Keys ...................................272
4-2. Opening, closing and
locking the doors
Side doors..........................277
Back door...........................282
Smart entry & start
system .............................287
4-3. Adjusting the seats
Front seats .........................318
Rear seats .........................319
Head restraints ..................321
4-4. Adjusting the steering
wheel and mirrors
Steering wheel .................. 324
Inside rear view mirror....... 326
Outside rear view
mirrors ............................. 328
4-5. Opening and closing the
windows
Power windows ................. 330
5-1. Before driving
Driving the vehicle ............. 336
Cargo and luggage............ 348
Trailer towing..................... 350
5-2. Driving procedures
Power (ignition) switch ...... 351
Hybrid transmission........... 357
Turn signal lever................ 363
Parking brake .................... 364
5-3. Operating the lights
and wipers
Headlight switch ................ 365
AHS (Adaptive High-beam
System) ........................... 369
Fog light switch ................. 375
Windshield wipers and
washer ............................ 376
5-4. Refueling
Opening the fuel tank
cap .................................. 379
3Instrument cluster
4Operation of each
component
5Driving

TABLE OF CONTENTS4
PRIUS PHV_OM_OM47C99E_(EE)5-5. Using the driving
support systems
Toyota Safety Sense .........383
PCS (Pre-Crash Safety
system) ............................395
LDA (Lane Departure Alert
with steering control) .......407
RSA (Road Sign Assist).....417
Dynamic radar cruise
control with full-speed
range ...............................422
Driving mode select
switch...............................437
Speed limiter ......................439
BSM
(Blind Spot Monitor) .........442
• The Blind Spot Monitor
function ..........................450
• The Rear Crossing
Traffic Alert function.......454
Toyota parking
assist-sensor ...................459
Intelligent Clearance
Sonar ...............................470
S-IPA (Simple Intelligent
Parking Assist
System) ...........................483
Driving assist systems .......518
5-6. Driving tips
Winter driving tips ..............5256-1. Using the air conditioning
system and defogger
Automatic air conditioning
system............................. 530
Remote Air Conditioning
System ............................ 542
Seat heaters ...................... 546
6-2. Using the interior lights
Interior lights list ................ 548
• Front interior light .......... 549
• Front personal lights ..... 549
• Rear interior light .......... 550
6-3. Using the storage features
List of storage features...... 551
• Glove box ...................... 552
• Console box .................. 552
• Cup holders .................. 553
• Bottle holders/
door pockets ................. 554
• Auxiliary boxes .............. 555
Luggage compartment
features ........................... 556
6-4. Using the other interior
features
Other interior features ....... 561
• Sun visors ..................... 561
• Vanity mirrors ................ 561
• Power outlets ................ 562
• Wireless charger ........... 563
• Coat hooks .................... 569
• Assist grips ................... 569
6Interior features

911-3. Theft deterrent system
1
PRIUS PHV_OM_OM47C99E_(EE)
For safety and security
The intrusion sensor detects intruders or movement in the vehicle.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
■Setting the intrusion sensor
The intrusion sensor will be set automatically when the alarm is set.
( P. 8 8 )
■Canceling the intrusion sensor
If you are leaving pets or other moving things inside the vehicle,
make sure to disable the intrusion sensor before setting the alarm,
as they will respond to movement inside the vehicle.
Turn the power switch off.
A message is displayed on the multi-information display for approxi-
mately 4 seconds asking if you wish to cancel the intrusion sensor.
Press or of the
meter control switch on the
steering wheel, select “Yes”
and then press .
If an operation is not performed
for approximately 5 seconds,
the message will be automati-
cally extinguished and the intru-
sion sensor will not be canceled.
The intrusion sensor will revert to on each time the power switch is
turned to ON mode.
Intrusion sensor (if equipped)
1
2

2083. Instrument cluster
PRIUS PHV_OM_OM47C99E_(EE)
Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.
Warning lights
Warning lightsPages
*1Brake system warning light (Red) P. 671
*1Brake system warning light (Yellow) P. 671
*1Charging system warning light P. 671
*1Low engine oil pressure warning light P. 672
*1Malfunction indicator lamp P. 672
*1SRS warning light P. 672
*1ABS warning light P. 672
*1Electric power steering system warning light
(Red/yellow) P. 672
*1, 2PCS warning light P. 673
*1Slip indicator light P. 673
*1High coolant temperature warning light P. 673
*1, 3ICS OFF indicator (if equipped) P. 674
Open door warning light P. 674
Low fuel level warning light P. 674

2133. Instrument cluster
3
Instrument cluster
PRIUS PHV_OM_OM47C99E_(EE)■
Multi-information display (symbol display*)
*: These symbols are displayed along with a message. Also, the symbol dis-
plays listed here are only an example, and different symbols may be dis-
played according to the contents of the multi-information display.
■BSM (Blind Spot Monitor) outside rear view mirror indicators
(if equipped) (P. 442)
• When the BSM function is enabled on the screen of the multi-infor-
mation display, the power switch is turned to ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by any authorized Toyota retailer
or Toyota authorized repairer, or any reliable repairer.
Symbol displayPages
Smart entry & start system P. 351
Brake Override System/Drive-Start Control/
Intelligent Clearance Sonar (if equipped)P. 676
LDA (Lane Departure Alert with steering con-
trol) systemP. 416
P. 416
●Indicators are also displayed on the out-
side rear view mirrors.
●In order to confirm operation, the BSM
outside rear view mirror indicators illumi-
nate in the following situations:
• When the power switch is in ON
mode, the BSM function is enabled
on the screen of the multi-infor-
mation display.

271
4
Operation of
each component
PRIUS PHV_OM_OM47C99E_(EE)4-1. Key information
Keys ................................... 272
4-2. Opening, closing and
locking the doors
Side doors.......................... 277
Back door........................... 282
Smart entry & start
system ............................. 287
4-3. Adjusting the seats
Front seats ......................... 318
Rear seats ......................... 319
Head restraints .................. 321
4-4. Adjusting the steering
wheel and mirrors
Steering wheel ................... 324
Inside rear view mirror ....... 326
Outside rear view
mirrors ............................. 328
4-5. Opening and closing the
windows
Power windows .................. 330

3264-4. Adjusting the steering wheel and mirrors
PRIUS PHV_OM_OM47C99E_(EE)
Inside rear view mirror
The height of the rear view mirror can be adjusted to suit your driving
posture.
Adjust the height of the rear view
mirror by moving it up and down.
Responding to the level of brightness of the headlights of vehicles
behind, the reflected light is automatically reduced.
Changing automatic anti-glare
function mode
On/off
When the automatic anti-glare
function is in ON mode, the indica-
tor illuminates.
The function will set to ON mode
each time the power switch is
turned to ON mode.
Pressing the button turns the func-
tion to OFF mode. (The indicator
also turns off.)
The rear view mirror’s position can be adjusted to enable suffi-
cient confirmation of the rear view.
Adjusting the height of rear view mirror
Anti-glare function
Indicator

3294-4. Adjusting the steering wheel and mirrors
PRIUS PHV_OM_OM47C99E_(EE)
4
Operation of each component
■Mirror angle can be adjusted when
The power switch is in ACCESSORY or ON mode.
■ When the mirrors are fogged up
The outside rear view mirrors can be cleared using the mirror defoggers. Turn
on the rear window defogger to turn on the outside rear view mirror defog-
gers. ( P. 535)
■ Using automatic mode in cold weather
When automatic mode is used in cold weather, the door mirror could freeze
up and automatic stowing and return may not be possible. In this event,
remove any ice and snow from the door mirror, then either operate the mirror
using manual mode or move the mirror by hand.
■ Customization
The automatic mirror folding and extending operation can be changed.
(Customizable features: P. 738)
WARNING
■Important points while driving
Observe the following precautions while driving.
Failing to do so may result in loss of control of the vehicle and cause an
accident, resulting in death or serious injury.
● Do not adjust the mirrors while driving.
● Do not drive with the mirrors folded.
● Both the driver and passenger side mirrors must be extended and properly
adjusted before driving.
■ When a mirror is moving
To avoid personal injury and mirror malfunction, be careful not to get your
hand caught by the moving mirror.
■ When the mirror defoggers are operating
Do not touch the rear view mirror surfaces, as they can become very hot
and burn you.