2018 TOYOTA LAND CRUISER steering

LC200_Navi_OM60Q52U_(U)
17.06.09 10:34
2211. Phone operation (Hands-free system for cellular phones)
Phone
7
1Select “Transmit Volume” .
2Select the desired level for the transmit
volume.
3Select “OK”.
1Select or press the switch
on the steering wheel to start talking
with the other party.
To refuse to receive the call : Select
or press the switch on the
steering wheel.
 Each time is selected or the
switch on the steering wheel is pressed
during an interrupted call, the party who is
on hold will be switched.
INFORMATION
● A continuous tone signal is a character
string that consists of numbers and the
characters p or w. (e.g.
056133w0123p#1 )
● When the “p” pause tone is used, the
tone data up until the next pause tone
will be automatically sent after 2 sec-
onds have elapsed. When the “w” pause
tone is used, the tone data up until the
next pause tone will be automatically
sent after a user operation is performed.
● Release tones can be used when auto-
mated operation of a phone based ser-
vice such as an answering machine or
bank phone service is desired. A phone
number with continuous tone signals
can be registered in the contact list.
● Tone data after a “w” pause tone can be
operated on voice command during a
call.
Transmit volume setting
INFORMATION
●The sound quality of the voice heard
from the other party’s speaker may be
negatively impacted.
● To reset the transmit volume, select
“Default” .
● “Transmit Volume” is dimmed when
mute is on.
Incoming call waiting
When a call is interrupted by a third
party while talking, this screen is dis-
played.
INFORMATION
● This function may not be available
depending on the type of cellular phone.

LC200_Navi_OM60Q52U_(U)
17.06.09 10:34
2221. Phone operation (Hands-free system for cellular phones)
1Press the button.
2Select .
The phone top screen can be displayed by
pressing the
switch on the steering
wheel.
3Check that the message inbox screen
is displayed.
: Select to change to phone mode.Bluetooth® phone
message function
Received messages can be forwarded
from the connected Bluetooth
® phone,
enabling checking and replying using
the navigation system.
Depending on the type of Bluetooth
®
phone connected, received messages
may not be transferred to the message
inbox.
If the phone does not support the mes-
sage function, this function cannot be
used.
FunctionPage
Receiving a message222
Checking messages223
Replying to a message (quick re-
ply)224
Calling the message sender225
Message settings235
Receiving a message
When an e-mail/SMS/MMS is re-
ceived, the incoming message screen
pops up with sound and is ready to be
operated on the screen.
No.Function
Select to check the message.
Select to not open the message.
Select to call the message sender.

LC200_Navi_OM60Q52U_(U)
17.06.09 10:34
2231. Phone operation (Hands-free system for cellular phones)
Phone
71Display the message inbox screen.
(→P.222)
2Select the desired message from the
list.
3Check that the message is displayed.
INFORMATION
●Depending on the cellular phone used
for receiving messages, or its registra-
tion status with the navigation system,
some information may not be displayed.
● The pop up screen is separately avail-
able for incoming e-mail and SMS/MMS
messages under the following condi-
tions:
E-mail:
• “Incoming E-mail Display” is set to “Full
Screen”. ( →P.235)
• “E-mail Notification Popup” is set to on. (→ P.235)
SMS/MMS:
• “Incoming SMS/MMS Display” is set to
“Full screen”. ( →P.235)
• “SMS/MMS Notification Popup” is set to on. ( →P.235)
Checking messages
No.Function
Select “Mark Unread” or “Mark
Read” to mark mail unread or read
on the message inbox screen.
This function is available when “Up-
date Message Read Status on
Phone” is set to on. ( →P.235)
Select to reply the message.
(→ P.224)
Select to display the previous or
next message.
Select to have messages read out.
To cancel this function, select
“Stop” .
When “Automatic Message Read-
out” is set to on, messages will be
automatically read out. ( →P.235)
Select to make a call to the sender.
INFORMATION
● Reading a text message is not available
while driving.
● Depending on the type of Bluetooth
®
phone being connected, it may be
necessary to perform additional steps on
the phone.
● Messages are displayed in the
appropriate connected Bluetooth
®
phone’s registered mail address folder.
Select the tab of the desired folder to be
displayed.
● Only received messages on the
connected Bluetooth
® phone can be
displayed.
● The text of the message is not displayed
while driving.
● Turn the “PWR·VOL” knob, or use the
volume control switch on the steering
wheel to adjust the message read out
volume.

LC200_Navi_OM60Q52U_(U)
17.06.09 10:34
2362. Setup
1Display the phone top screen.
(→P.215)
2Select .
3Select “Settings” .
1Display the “Phone/Message Settings”
screen. (→P.226)
2Select “Phone Display Settings” .
3Select the desired item to be set.
Displaying the “Messaging
Settings” screen in a different
way“Phone Display Settings” screen
No.Function
Select to change the incoming call
display.
“Full Screen”: When a call is re-
ceived, the hands-free screen is dis-
played and can be operated on the
screen.
“Drop-Down” : A message is dis-
played on the upper side of the
screen and can only be operated via
the steering wheel switches.
Select to set display of the contact/
history transfer completion message
on/off.
Select to reset all setup items.
INFORMATION
● Depending on the phone, these func-
tions may not be available.

LC200_Navi_OM60Q52U_(U)
17.06.09 10:34
262Alphabetical index
S
Screen adjustment ......................... 29
Search operation ............................ 69Searching by address................ 70
Searching by address book ....... 75
Searching by coordinates .......... 77
Searching by emergency........... 75
Searching by intersection and freeway ................................... 76
Searching by map ..................... 77
Searching by point of interest .... 71
Searching from previous destinations ............................. 74
Selecting search area................ 69
Setting home as destination ...... 70
Setting preset destinations as destination............................... 70
Setting Bluetooth
® details .............. 36
“Bluetooth* Setup” screen ......... 36
Connecting a Bluetooth
®
device...................................... 38
Deleting a Bluetooth
®
device...................................... 38
Editing the Bluetooth
®
device information ................... 40
Registering a Bluetooth
®
device...................................... 37
“System Settings” screen .......... 41
Setting home as the destination ..... 18
Setup ...................... 97, 173, 226, 255
“Setup” screen................................ 13 Some basics .........................111, 212
About the contacts in the contact list ..............................214
Audio screen adjustment..........115
Disc slot....................................112
Registering/connecting a Bluetooth
® phone ...............213
Selecting an audio source ........111
Sound settings .........................114
Turning the system on and off ...............................111
USB/AUX port ..........................113
Using the phone switch/ microphone ............................213
Voice command system ...........................116, 214
When selling or disposing of the vehicle..............................214
Starting route guidance ...................78
Pausing guidance.......................80
Steering switches ..........................171
T
Talking on the Bluetooth®
phone..........................................220
Incoming call waiting ................221
Tips for operating the audio/ visual system ..............................178
Tips for the navigation system ......103
Touch screen gestures ...................23
Touch screen operation ..................24
Traffic information ...........................65
Displaying traffic information on the map ...............................67
Traffic settings...............................100 Auto avoid traffic ......................101
Screen for traffic settings .........101
Troubleshooting ............................237
Typical voice guidance prompts......86
*: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.