2018 TOYOTA CAMRY child restraint

651-2. Child safety
1
For safety and security
CAMRY_U (01999-06122)■
Child restraint LATCH anchors
LATCH anchors are provided
for the outboard rear seats.
(Marks displaying the location
of the anchors are attached to
the seats.)
■When installing in the rear outboard seats
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
If the head restraint interferes
with the child restraint sys-
tem installation and the head
restraint can be removed,
remove the head restraint.
(→P. 162)
Remove the cover.
Child restraint system fixed with a child restraint LATCH anchor
1
2

661-2. Child safety
CAMRY_U (01999-06122)
With flexible lower attachments
Latch the hooks of the lower
straps onto the LATCH
anchors.
For owners in Canada:
The symbol on a child
restraint system indicates the
presence of a lower connec-
tor system.
With rigid lower attachments
Latch the buckles onto the
LATCH anchors.
For owners in Canada:
The symbol on a child
restraint system indicates the
presence of a lower connec-
tor system.
If the child restraint has a top tether strap, follow the child
restraint manufacturer’s operation manual regarding the installa-
tion, using the top tether strap to latch onto the top tether strap
anchor. (→P. 6 8 )
Canada only
3
Canada only
3
4

671-2. Child safety
1
For safety and security
CAMRY_U (01999-06122)
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely. (→P. 64)
■When installing in the rear center seat
There are no LATCH anchors behind the rear center seat. How-
ever, the inboard LATCH anchors of the outboard seats, which are
16.1 in. (410 mm) apart, can be used if the child restraint system
manufacturer’s instructions permit use of those anchors with the
anchor spacing stated.
Child restraint systems with rigid lower attachments cannot be
installed in the center seat. This type of child restraint system can
only be installed in the outboard seat.
■Laws and regulations pertaining to anchors
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-
tions can be used.
This vehicle is designed to conform to SAE J1819.
WARNING
■When installing a child restraint system
Observe the following precautions.
Failure to do so may result in death or serious injury.
●When using the LATCH anchors, be sure that there are no foreign objects
around the anchors and that the seat belt is not caught behind the child
restraint system.
●Follow all installation instructions provided by the child restraint system
manufacturer.
●Never attach two child restraint system attachments to the same anchor. In
a collision, one anchor may not be strong enough to hold two child
restraint system attachments and may break.
If the LATCH anchors are already in use, use the seat belt to install a child
restraint system in the center seat.
●When securing some types of child restraint systems in rear seats, it may
not be possible to properly use the seat belts in positions next to the child
restraint without interfering with it or affecting seat belt effectiveness. Be
sure your seat belt fits snugly across your shoulder and low on your hips. If
it does not, or if it interferes with the child restraint, move to a different
position. Failure to do so may result in death or serious injury.
●If the seat is adjusted, reconfirm the security of the child restraint system.
5

681-2. Child safety
CAMRY_U (01999-06122)■
Anchor brackets (for top tether strap)
Anchor brackets are provided for each rear seat.
Use anchor brackets when fixing the top tether strap.
■Fixing the top tether strap to the anchor bracket
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
Adjust the head restraint to
the upmost position.
If the head restraint interferes
with the child restraint system
installation and the head
restraint can be removed,
remove the head restraint.
(→P. 162)
Using an anchor bracket (for top tether strap)
Seats with an adjustable type
head restraintSeats with an integrated type
head restraint
Anchor bracketsAnchor brackets
1

691-2. Child safety
1
For safety and security
CAMRY_U (01999-06122)
Open the anchor bracket cover, latch the hook onto the anchor
bracket and tighten the top tether strap.
Make sure the top tether strap is securely latched. (→P. 64)
When installing the child restraint system with the head restraint being
raised, be sure to have the top tether strap pass underneath the head
restraint.
■Laws and regulations pertaining to anchors
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-
tions can be used.
This vehicle is designed to conform to SAE J1819.
2
Seats with an adjustable type
head restraintSeats with an integrated type
head restraint
HookTop tether strapHookTop tether strap

701-2. Child safety
CAMRY_U (01999-06122)
WARNING
■When installing a child restraint system
Observe the following precautions.
Failure to do so may result in death or serious injury.
●Firmly attach the top tether strap and make sure that the belt is not twisted.
●Do not attach the top tether strap to anything other than the anchor
bracket.
●After securing a child restraint system, never adjust the seat.
●Follow all installation instructions provided by the child restraint system
manufacturer.
●When installing the child restraint system with the head restraint being
raised, after the head restraint has been raised and then the anchor
bracket has been fixed, do not lower the head restraint.
NOTICE
■Anchor brackets (for top tether strap)
When not in use, make certain to close the lid. If it remains open, the lid
may be damaged.

1633-3. Adjusting the seats
3
Operation of each component
CAMRY_U (01999-06122)■Installing the head restraints
Front seats
Rear seats
■Adjusting the height of the head restraints Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
Align the head restraint with the installa-
tion holes and push it down to the lowest
lock position while pressing the lock
release button.
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
WARNING
■Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
●Use the head restraints designed for each respective seat.
●Adjust the head restraints to the correct position at all times.
●After adjusting the head restraints, push down on them and make sure
they are locked in position.
●Do not drive with the head restraints removed.
(However, if a head restraint interferes with installation of a child restraint
system, the head restraint can be removed to accommodate the child
restraint system: →P. 52)
Lock release
button
Lock release
button

597Alphabetical index
CAMRY_U (01999-06122)
Back-up lights
Replacing light bulb ...... 478, 483
Wattage ................................ 550
Battery ...................................... 440
Battery checking ................... 440
If the battery is discharged.... 529
Preparing and checking
before winter....................... 345
Blind Spot Monitor (BSM) ....... 300
Blind Spot Monitor
function ............................... 304
Rear Cross Traffic Alert
function ............................... 306
Bluetooth
®*
Bottle holders .......................... 375
Brake
Brake Hold ............................ 217
Fluid ...................................... 547
Parking brake................ 212, 213
Warning light ......................... 497
Brake assist ............................. 294
Brake Hold................................ 217
Warning light ......................... 498
Brake override system ............ 185
Break-in tips ............................ 185
Brightness control
Instrument panel light
control................................... 85
BSM (Blind Spot Monitor) ....... 300
Blind Spot Monitor
function ............................... 304
Rear Cross Traffic Alert
function ............................... 306Care
Aluminum wheels ................. 415
Exterior ................................. 414
Interior .................................. 417
Seat belts.............................. 418
Cargo capacity......................... 195
CD player
*
Chains ...................................... 346
Child restraint system............... 52
Booster seats installation........ 62
Convertible seats
installation ............................ 60
Front passenger occupant
classification system ............ 45
Infant seats definition.............. 59
Infant seats installation ........... 54
Installing CRS
with LATCH anchors ............ 65
Installing CRS
with seat belts ...................... 59
Installing CRS
with top tether strap.............. 68
LATCH anchors ...................... 65
BC
*: Refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S
MANUAL”.