2018 TOYOTA 4RUNNER display

185
2. SETUP
4RUNNER_Navi_U
PHONE
7
1Display the phone top screen.
(→P.160)
2Select “Settings” .
3Select “Messaging Settings” .
1Display the “Phone/Message Settings”
screen. (→P.174)
2Select “Phone Display Settings” .
3Select the desired item to be set.
INFORMATION
●Depending on the phone, these func-
tions may not be available.
DISPLAYING THE “Messaging
Settings” SCREEN IN A
DIFFERENT WAY
“Phone Display Settings”
SCREEN
No.Function
Select to change the incoming call
display.
“Full Screen” : When a call is re-
ceived, the hands-free screen is dis-
played and can be operated on the
screen.
“Drop-down” : A message is dis-
played on the upper side of the
screen.
Select to set display of the contact/
history transfer completion message
on/off.
Select to reset all setup items.
INFORMATION
● Depending on the phone, these func-
tions may not be available.

188
3. WHAT TO DO IF...
4RUNNER_Navi_U
When making/receiving a call
“Unable to dial.
Please check your
phone.”
Bluetooth® function
is not enabled on
the cellular phone.Enable the Bluetooth®
function on the cellular
phone.∗⎯
Old registration in-
formation remains
on either this sys-
tem or the cellular
phone.Delete the existing reg-
istration information
from both this system
and the cellular phone,
then register the cellu-
lar phone you wish to
connect to this system.
∗50
SymptomLikely causeSolution
Page
Cellular phoneThis
system
A call cannot be
made/received.Your vehicle is in a
“No Service” area.Move to where “No
Service” no longer ap-
pears on the display.
⎯⎯
SymptomLikely causeSolution
Page
Cellular phoneThis
system

191
3. WHAT TO DO IF...
4RUNNER_Navi_U
PHONE
7
In other situations
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
The Bluetooth® con-
nection status is dis-
played at the top of
the screen each time
the engine switch is in
following.
 Vehicles without
a smart key sys-
tem
The engine switch is
in the “ACC” or “ON”
position.
Vehicles with a
smart key system
The engine switch is
in ACCESSORY or
IGNITION ON
mode.
Connection confir-
mation display on
this system is set to
on.To turn off the display,
set connection confir-
mation display on this
system to off.
⎯54

194
4RUNNER_Navi_U
1. QUICK REFERENCE ................... 196
MAP SCREEN ..................................... 196
NAVIGATION OPTIONS SCREEN...... 198
2. MAP SCREEN OPERATION ....... 199
CURRENT POSITION DISPLAY ......... 199
MAP SCALE ........................................ 199
ORIENTATION OF THE MAP ............. 200
SWITCHING THE MAP MODE............ 201
SCREEN SCROLL OPERATION ........ 203
ADJUSTING LOCATION IN SMALL INCREMENTS................................... 203
3. MAP SCREEN INFORMATION .......................... 204
DISPLAYING MAP INFORMATION .... 204
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET ...................... 206
STANDARD MAP ICONS .................... 207
4. TRAFFIC INFORMATION ............ 208
DISPLAYING TRAFFIC INFORMATION ON THE MAP .......... 210
1. DESTINATION SEARCH SCREEN .................................... 211
2. SEARCH OPERATION.. .............. 213
SELECTING SEARCH AREA .............. 214
SETTING HOME AS
DESTINATION................................... 214
SETTING PRESET DESTINATIONS AS DESTINATION ............................. 214
SEARCHING BY ADDRESS ................ 215
SEARCHING BY POINT OF INTEREST ......................................... 216
SEARCHING FROM PREVIOUS DESTINATIONS ................................ 219
SEARCHING BY ADDRESS BOOK ................................................ 219
SEARCHING BY EMERGENCY .......... 220
SEARCHING BY INTERSECTION AND FREEWAY ................................ 220
SEARCHING BY MAP ......................... 222
SEARCHING BY COORDINATES ....... 222
3. STARTING ROUTE GUIDANCE ....... ......................... 223
STARTING ROUTE GUIDANCE.......... 223
PAUSING GUIDANCE ......................... 226
1BASIC OPERATION2DESTINATION SEARCH
8
NAVIGATION SYSTEM*

196
4RUNNER_Navi_U
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “APPS” button, then select “Navigation” on the
“Apps” screen.
No.NameFunctionPage
2D North-up, 2D
heading-up or 3D
heading-up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehicle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
200
Options buttonSelect to display the “Navigation Options” screen.198
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS.257
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance for traffic information.
When traffic information is received via HD Radio
broadcast, HD mark is displayed on the right.
208
Scale indicatorThis figure indicates the map scale.199

197
1. BASIC OPERATION
NAVIGATION SYSTEM
4RUNNER_Navi_U
8
Zoom in/out but-
tonSelect to magnify or reduce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.199
Current position
button/voice
guidance button•Select to display the current position address.
• Select to repeat voice guidance.232
Destination but-
tonSelect to display the “Destination” screen.211
Speed limit iconIndicates the speed limit on the current road. The
display of the speed limit icon can be set to on/off.204
Route informa-
tion bar
Displays the current street name, or the distance
with the estimated travel time/arrival time to the
destination. The route information bar fills from
left to right as the vehicle progresses on the
route.
227
Route informa-
tion buttonSelect to change the display between the current
street name and the distance with the estimated
travel/arrival time.
227
No.NameFunctionPage

198
1. BASIC OPERATION
4RUNNER_Navi_U
NAVIGATION OPTIONS SCREEN
The navigation options allow you to change map configurations, display/hide POI
icons, and edit the navigation routes. To display the “Navigation Options” screen,
press the “APPS” button, select “Navigation” on the “Apps” screen, and select
“Options” on the map screen.
No.FunctionPage
Select to change the map configuration.201
Select to change the displayed map information such as POI icons,
route trace, speed limit, etc.204
Select to display the map version and coverage area.259
Select to edit the set route.233
Select to pause or resume route guidance.226
Select to display the overview of the entire route.228

199
1. BASIC OPERATION
4RUNNER_Navi_U
NAVIGATION SYSTEM
8
2. MAP SCREEN OPERATION
1Press the “APPS” button.
2Select “Navigation” .
3Check that the current position map is
displayed.
1Select or to change the
scale of the map screen.
The scale indicator bar appears at the bot-
tom of the screen.
 Select and hold or to con-
tinue changing the scale of the map
screen.
 The scale of the map screen can also be
changed by selecting the scale bar
directly. This function is not available while
driving.
CURRENT POSITION
DISPLAY
To correct the current position manu-
ally:
→P. 2 4 9
INFORMATION
● While driving, the current position mark
is fixed on the screen and the map
moves.
● The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
● After the battery disconnection, or on a
new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
MAP SCALE
INFORMATION
●The map scale is displayed above the
zoom in button at the bottom left of the
screen.