2018 SKODA RAPID SPACEBACK ignition

Since start (M ) or “1” ( C)
Drive data is stored from when the ignition is switched on to when it is switch-
ed off. If the trip is continued within 2 hours after switching off the ignition,
new data will also flow into the calculation of the current driving information.
If the trip is interrupted for more than 2 hours, the memory is automatically
erased.Long-term
( M ) and “2” ( C)
The memory gathers driving data from any number of individual journeys up to
a total of 99 hours and 59 minutes driving time or 9999 kilometres driven.
The indicator is automatically set back to zero if one of the indicated values isexceeded.
Since refuel
( M ) or “3” ( C)
The driving data is stored in the memory since the last fuel refuelling.
The memory is erased automatically the next time you fill up.

This function is pointed out by the following message on the display of the in-
strument cluster after the ignition is switched off.Check SAFELOCK! Owner

WARNINGAlways adjust the headlight beam to meet the following conditions - other-
wise risk of accident.
v
The vehicle does not dazzle other road users, especially oncoming vehi-
cles.

v
The beam range is sufficient for safe driving.
Note

v If, with a dipped beam, the ignition is turned off, then the dipped beam will
automatically switch off and the parking lights will come on. Does not apply to
the position , as long as the conditions are met for the COMING HOME
function . The parking lights are switched off when the ignition key is removed
(for vehicles with the KESSY system, after opening the driver

CAUTION
vThe sockets can only be used for the connection of approved electrical ac-
cessories with a total power consumption of up to 120 watts - otherwise the
electrical system of the vehicle may be damaged.
v
Connecting appliances when the engine is not running will drain the battery
of the vehicle!

v
Before switching the ignition on / off or before starting the engine, switch
off the devices which are connected to the sockets - there is a risk of damage
to the equipment due to voltage fluctuations.
12-volt socket
Fig. 93
12-volt socket cover: in the front centre console/in the luggage
compartment

If the vehicle is fitted with the starter button, Infotainment will switch off au-
tomatically after the engine is switched off and the door is opened.
With the ignition off, Infotainment will automatically switch off after about 30
minutes.
Infotainment switches off automatically under certain circumstances. Infotain-
ment informs you of this via a text message on the Infotainment display.
Infotainment restart
If Infotainment stops responding (if it “freezes”), it can be restarted by press-
ing and holding 
for longer than 10 s (does not apply to Infotainment Blues).
Show time and date on the screen
Does not apply to Infotainment Blues.
You can display the time and date on the Infotainment screen in standby mode
and in "Screen off" mode.
Standby mode
With the ignition on and infotainment off (Standbymode), it is possible to dis-
play the time and date on the Infotainment screen.
Applies to Infotainment Amundsen

vClock - Time display on the Infotainment display (with the ignition on and the
Infotainment off)

vYes
- Switches the display on

v
No
- Switches the display off

v
Restore
- Reset to factory settings

v
Press
 - Confirmation of the factory settings
Radio menu settings

Conditions for pairingThe ignition is switched on.
The Bluetooth

Switching the ignition on/offFig. 186
Positions of the vehicle key in the ignition lock / starter button