Page 64 of 256
Automatic driving light controlFig. 55
Light switch: position
The light switch is in position
Page 66 of 256
Hazard warning light systemFig. 58
Button for hazard warning light
system
Page 67 of 256
Positions of the sliding light switch A
Page 71 of 256
When the interior lights are switched on or the reverse gear is engaged, the
mirror moves back into the basic position (not dimmed).WARNINGv Attach external devices (e.g. navigation system) not in the vicinity of the
mirror with automatic dimming . The illuminated display of an external de-
vice can affect the function of the rear-view mirror - it could cause an acci-
dent.v
The automatic dimming mirror only functions smoothly if the light falling
on the sensors is not compromised (e.g. by the sunshade at the back). The sensors are located on the front and back of the mirror.
Exterior mirrors
Fig. 67
Exterior mirror operation: mechanical / electrical
Page 82 of 256
Cigarette lighterFig. 96
Cigarette lighter
Page 165 of 256
Before negotiating a long or steep gradient , reduce speed and shift down a
gear. As a result, the braking effect of the engine will be used, reducing the
load on the brakes. If, nevertheless, there is a need for additional braking, it
should be carried out at intervals.
Emergency braking warning - if it is necessary to brake hard, the system may
cause the brake lights to automatically flash, to alert the traffic behind.
New brake pads must first be “run in” because these do not initially have the
best possible braking effect. Drive especially carefully for the first 200 km or
so.
If the brake fluid level is too low, it can cause faults in the braking system
Page 168 of 256
The selector lever lock is indicated by the illumination of the warning light .
Disengage selector lever from P mode or N
Page 172 of 256
If there is a TCS intervention, the warning light ! flashes in the instrument
cluster.
Anti-lock brake system (ABS)
