2018 Seat Tarraco lights

Lights and visibility
other obstacles on the windscreen may
damage the wiper and the windscreen wip-
er mot or
.

Lights and visibility

Operation
Control lamp
1 Meaning
It lights up for approx.
2 seconds in orange ,
then fl
ashes in green or
red. The remote control bat-
tery is almost flat. No on
or off signal has been r
e-
ceived.
Flashes orange for
around 5 seconds. The r
emot
e control bat-
tery is fl at. No on or off
signal has been r
e-
ceived. a)
The remote control is out of range. In this case it will
be necessary to get cl oser t

o the vehicle and press
the corresponding button again.
Replacing the remote control battery
When pressing the buttons, if the control
lamp of the remote 1 flashes for approx. 5
or ange or does not light up
, the batt

eries
must be replaced.
The battery is located beneath a cover on
the back of the remote control.

Air conditioning
Function button: function
Departure time 1 , Departure time
2, Departure time 3 : Three differ
ent de-
parture times (hh.mm) may be programmed. If
the auxiliary heater should only be switched
on a certain day of the week, this can also be
selected.
Duration : The duration det ermines the oper
-
ating time of the auxiliary heater when switch-
ed on using the fast heating button  on the air conditioning controls. The duration is also
used to calculate the departure time for the
manual air conditioner. It can be set between
10 and 60 minutes at 10-minute intervals.
E This returns to the main menu. The programmed departure time determines
the appr
oximat

e time it should take to reach
the temperature set in the vehicle. The start of
the heating operation is determined automat-
ically depending on the outside temperature.
Checking the programming
When a departure time is activated and the
ignition is switched off the control lamp of the
fast heating button  lights up for approxi- mately 10 seconds. WARNING
Never programme the auxiliary heater so
that it swit ches itself on and is running in an
encl

osed space or an area with no ventila-
tion. The auxiliary heater exhaust fumes contain carbon monoxide, an odourless
and colourl
ess t

oxic gas. Carbon monoxide
can cause people to lose consciousness. It
can also cause death. Operating instructions
The auxiliary heater exhaust system located
belo
w the v

ehicle must be kept clear of snow,
mud and other objects. The exhaust fumes
must be able to exit freely. The emissions
generated by the auxiliary heater are re-
moved via an exhaust pipe fitted underneath
the vehicle.
On heating the vehicle interior, depending on
the outside temperature, the warm air is first
directed at the windscreen and then to the
rest of the vehicle interior through the air
vents. Directing the diffusers

Start and driving
Control lamps 
It lights up green
The brake pedal is not engaged.
To select a r ange of gears, press the brake pedal. 
Flashes green
The interlock button on the selector lever is not
pressed.
Mo v

ement of the vehicle is prevented. Engage the se-
lector lever lock. Selector lever positions
Read the additional information carefully

Driver assistance systems
Driver assistance systems
St ar
t
-Stop system*
Control lamps 
It lights up
The Start-Stop system is available, the automatic en-
gine shutdown is activ
e.i
It lights up
The Start-Stop system is not available. Instructions for the driver on the instru-
ment panel displ
ay
Start-Stop system deactivated.
Start the engine manually
This driv er message is displ

ayed when cer-
tain conditions are not met during the stop-
ping phase and the Start-Stop system can-
not restart the engine. The engine must be
started manually.
Start-Stop system: Fault! Function
not available
There is a fault in the Start-Stop system. Take
the vehicle to a workshop to have the fault re-
paired. Description and operation The Start-Stop system helps save fuel and
reduce CO
2 emissions.
In St art

-Stop mode, the engine will automati-
cally switch off when the vehicle stops or is
stopping; for example when stopping at traf-
fic lights. The ignition remains switched on
during the stopping phase. The engine auto-
matically switches back on when required. In
this situation, the light of the START ENGINE STOP button stays on.
As soon as the ignition is swit ched on, the
St

art-Stop function is automatically activa-
ted.
Further information about the Start-Stop sys-
tem can be found on the Easy Connect sys-
tem: by pressing the button  in the Vehicle
status menu.
Vehicles with a manual gearbox

Driving
Note
Before entering a car wash, always switch
off the Auto Hol d function, because if the
el
ectronic parking brake is automatically
connected, it may cause damage. Cruise control system
(CCS)*
Control l amp %
It lights up green
The Cruise Control System (GRA) is switched on and
active .
OR:

The Adaptive Cruise Contr ol syst
em (CCS) is
switched on and active.
OR: the speed limiter is s wit
ched on and active.Several warning and control lamps light up
f
or a f
e

w seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds. WARNING
Observe the safety warnings

Driver assistance systems
Overtaking
When the t urn signal lights up bef
or
e the ve-
hicle begins an overtaking manoeuvre, the
ACC accelerates the vehicle automatically
and thus reduces the distance from the vehi-
cle in front.
When the vehicle enters the overtaking lane,
if the ACC does not detect another vehicle in
front, it accelerates until it reaches the pro-
grammed speed and maintains it.
System acceleration can be interrupted at
any time by pressing the brake or moving the
third lever backwards