Page 241 of 360
Start and driving
Engaging gears with the tiptronic
mode* Fig. 222
Centre console: changing gear with
tiptr onic Fig. 223
Steering wheel: automatic gearbox
l e v
ers The tiptronic gives the driver the option to
change gears manually. Changing gear manually with the selector
l
e
v
er
It is possible to change to tiptronic mode,
both when the vehicle is stopped and while
driving.
Page 243 of 360
Start and driving
throttle, the gearbox will shift down to a lower
gear , depending on r
oad speed and engine
speed. The upshift t
o the next higher gear is
delayed until the engine reaches maximum
rpm. WARNING
Please note that if the road surface is slip-
pery or wet, the kick -do
wn feature could
cause the driving wheels to spin, which
could result in skidding. Launch control program
Valid f
or vehicles: with Launch-Control/6-
Speed DSG with diesel engines superior t
o 125
kW and petrol engines superior to 140 kW.
The Launch control programme enables
maximum acceleration.
Condition: the engine must have reached op-
erating temperature and the steering wheel
must not be turned.
The engine speed for launch-control is differ-
ent on petrol and diesel engines. To use the
launch-control you must disconnect the anti-
slip regulation (ASR) through the Easy Con-
nect system menu
Page 247 of 360
Start and driving
thereby causing a small turn of the wheel in
the corr ect dir
ection t
o avoid skidding
Page 262 of 360
Driving
pressing the clutch, accelerator or moving
the wheel.
Page 293 of 360
Towing bracket device
it is advisable not to drive at the maximum
permissibl e speed in an unf
av
ourable road,
weather or wind conditions. This applies es-
pecially when driving downhill.
You should always reduce speed immediately
if the trailer shows the slightest sign of snak-
ing. Never try to stop the “snaking” by in-
creasing speed.
Always brake in due course. If the trailer has
an overrun brake, apply the brakes gently at
first and then, firmly. This will prevent the jerk-
ing that can be caused by locking of trailer
wheels. Select a low gear in due course be-
fore going down a steep downhill. This ena-
bles you to use the engine braking to slow
down the vehicle.
Reheating
At very high temperatures and during pro-
longed slopes, driving in a low gear and high
engine speed, always monitor the coolant
temperature gauge
Page 313 of 360
Wheels
Replacing a vehicle battery
The batt ery has been de
v
eloped to suit the
conditions of its location and has special
safety features.
Genuine SEAT batteries meet the mainte-
nance, performance and safety specifica-
tions of your vehicle. WARNING
Page 314 of 360

Practical tips
If the rims and tyres have received a heavy
impact or hav e been damaged, hav
e them
check
ed and, if required, replaced at a speci-
alised workshop.
Low profile tyres may deteriorate more quick-
ly than standard tyres.
Concealed damage
Damage to tyres and rims is often not readily
visible. If you notice unusual vibration or the
car pulling to one side, this may indicate
that one of the tyres is damaged. Reduce
speed immediately if there is any reason to
suspect that damage may have occurred. In-
spect the tyres for damage. If no external
damage is visible, drive slowly and carefully
to the nearest specialised workshop and
have the car inspected.
Tyres with directional tread pattern
An arrow on the tyre sidewall indicates the di-
rection of rotation on single drive tyres. Al-
ways note the direction of rotation indicated
when mounting the wheel. This guarantees
optimum grip and helps to avoid aquaplan-
ing, excessive noise and wear.
Retrofitting accessories
If you wish to change or fit wheels, rims or
wheel trims, we recommend that you consult
with a SEAT Official Service centre for advice
regarding current techniques. WARNING
Page 315 of 360