2018 Seat Ibiza lock

Opening and closing
For the sake of the environment
Please dispose of your used batteries cor-
rectly and with r espect f
or the environ-
ment. Synchronising the remote control
key
If it is not possible to unlock or lock the door
with the remot
e contr

ol, it should be re-
synchronised.
While the vehicle is open:

Operation
Note
For anti-theft security, only the driver door
is fitted with a l ock cylinder
.Security system “Safe”*
1)This is an anti-theft device which consists of a
double l
ock f

or the door locks and a deacti-
vation function for the boot in order to prevent
forced entry.
Activation
The “safe” system is activated when the vehi-
cle is locked using the key or the remote con-
trol.
To activate it with the key, rotate once it is in-
serted in the door lock cylinder in the locking
direction.
To activate the system using the remote con-
trol, press the lock button once  on the re- mote.
Once this system is activated, opening doors
from the outside and the inside is not possi-
ble. The rear lid can not be opened. The cen-
tral lock button does not work. When the ignition is switched off, the instru-
ment panel display indicat
es that the “Saf

e”
system is on.
Deactivation
Rotate the key inserted in the lock cylinder
twice towards the locking direction.
To activate the system using the remote con-
trol, press the lock button on the remote twice
 in less than five seconds.
On deactivating the “Safe” system, the alarm
volumetric sensor is also deactivated.
With the “Safe” switched off, doors can be
opened from the interior but not from the ex-
terior.
See “Selective unlocking system*”
“Safe” status
On the driver door, there is warning lamp visi-
ble from outside the vehicle through the win-
dow which shows the “Safe” system status.
We will know that “Safe” system is activated
by the flashing warning lamp. The indicator
will flash on all vehicles, fitted and nor fitted
with an alarm, until they unlock.
Remember: Safe enabled with or without alarm: con-
tinuous flashing of warning l
amp.
Safe disabled without alarm: the warning
lamp stays off.
Safe disabled with alarm: the warning lamp
stays off. WARNING
No one should remain inside the vehicle if
the “Safe” syst em is activ

ated because
opening the doors will not be possible in
the event of an emergency neither from the
inside nor the outside and help from the
outside is made difficult. Danger of death.
Passengers could become trapped inside
in case of emergency. Selective unlocking system*
This system allows to unlock either just the
driv
er door or all the v
ehicl

e.
Driver door unlock button
Unlock once. Use either the key or the remote
control.
Once the key is inserted in the lock cylinder,
rotate once in the unlock direction. The driver
door will remain without “Safe” and unlocked. 1)
Available depending on market and version.
128

Opening and closing
Once the doors have been locked, they can-
not be opened again immediat ely. This will
enabl e you t
o check that the doors are prop-
erly closed.
If you wish, when unlocking, you can unlock
only the driver

Operation
What happens when locking the vehicle
with a second k ey
If ther e is a v
ehicle key inside the vehicle and
it is locked from the outside with a second ve-
hicle key, the key inside the vehicle is blocked
for engine ignition

Operation
flash along with the turn signals, indicating
that the al arm and the l
ocking securit
y sys-
tem (double lock) have been turned on.
If any of the doors or the bonnet are open,
they will not be included in the protection
zones of the vehicle when the alarm is con-
nected. If the door or the bonnet are subse-
quently closed, they will be automatically in-
cluded in the protection areas of the vehicle
and the turn signals will flash accordingly
when the doors close.

Operation
Fold the rearview mirrors when locking the
v ehicl
e*
The Easy Connect syst
em, the  /  but
-
t on and the function butt

ons SETTINGS !
Mirrors and windscreen wipers can be
used to have the exterior mirrors fold in when
the vehicle is parked and locked

Driving
Electronic differential lock (EDS)* The EDL operates along with the ABS in vehi-
cles equipped with El
ectr
onic Stability Con-
trol (ESC)*.
EDL helps the vehicle to start moving, accel-
erate and climb a gradient in slippery condi-
tions where this may otherwise be difficult or
even impossible.
It uses the ABS sensors to monitor the speed
of the driven wheels.
At speeds of up to approximately 80 km/h
(50 mph), it is able to balance out differences
in the speed of the driven wheels of approxi-
mately 100 rpm/min caused by a partially
slippery road surface. It does this by braking
the wheel which has lost traction and distrib-
uting more driving force to the other driven
wheel via the differential.
To prevent the disc brake of the braking
wheel from overheating, the EDL cuts out au-
tomatically if subjected to excessive loads.
The vehicle will continue to function normally
without EDL. For this reason, the driver is not
informed that the EDL has been switched off.
The EDL will switch on again automatically
when the brake has cooled down. Control lamp
A malfunction in the EDL is indicated by the
ESC contr ol l

amp . Take the vehicle to a
specialised workshop as soon as possible. WARNING

Towing bracket device
Assembling the detachable ball -
St ep 2 Fig. 256
Locking the lock. Fig. 257
Placing the cover over the lock. Do not omit this first step