2018 Ram ProMaster City trip computer

GETTING TO KNOW YOUR INSTRUMENT PANEL
CONTENTS
INSTRUMENT CLUSTER ...................72
▫ Instrument Cluster Descriptions .............72
 INSTRUMENT CLUSTER DISPLAY ............73
▫ Location And Controls ...................74
▫ Change Engine Oil — If Equipped ...........76
▫ Instrument Cluster Display Menu Items ........76
 TRIP COMPUTER .........................81
▫ Trip Button ............................81
▫ Trip Functions .........................82
▫ Values Displayed .......................82
 WARNING LIGHTS AND MESSAGES ..........83▫
Red Warning Lights ......................83
▫ Yellow Warning Lights ....................87
▫ Yellow Indicator Lights ...................91
▫ Green Indicator Lights ....................91
▫ Blue Indicator Lights .....................92
 ONBOARD DIAGNOSTIC SYSTEM — OBD II ....92
▫ Onboard Diagnostic System (OBD II)
Cybersecurity ..........................92
 EMISSIONS INSPECTION AND MAINTENANCE
PROGRAMS ............................934

2. If the function is on, push and release theupordown
arrow button to select the required speed limit and then
push MENU to confirm.
NOTE: The speed may be set in the range from 20 to 125
MPH (30 to 200 km/h) according to the previously chosen
unit.
The setting will increase/decrease by five units each time
the upordown arrow button is pushed. Hold down the up
or down arrow button to automatically increase/decrease
the setting rapidly. Complete the adjustment when you
approach the desired value.
Push the MENUbutton briefly to return to the menu
screen or hold the MENUbutton down to return to the
standard screen without storing.
To cancel the setting:
1. Briefly push the MENUbutton. “ON” will flash in the
display.
2. Push the downarrow button. “OFF” will flash in the
display.
3. Push the MENUbutton briefly to return to the menu
screen or hold the MENUbutton down to return to the
standard screen without storing.Trip B Data
This function can be used to activate (On) or deactivate
(Off) the Trip B display (Partial Trip).
Refer to Trip Computer in this section for further infor-
mation.
To switch the function On/Off:
1. Push the MENUbutton briefly. The display will flash
On or Off according to the previous setting.
2. Push and release the upordown arrow button to select.
Push the MENUbutton briefly to return to the menu
screen or hold the MENUbutton down to return to the
standard screen without storing.
Set Time
With this function, it is possible to set the time through two
submenus: TimeandMode.
To set the time:
1. Push the MENUbutton; the display will show the two
submenus “Time” and “Mode”.
2. Push and release the upordown arrow button to switch
between the two submenus.
4
GETTING TO KNOW YOUR INSTRUMENT PANEL 77

Exit Menu
This is the last function that closes the cycle of settings
listed in the menu screen.
1. Pushing theMENUbutton briefly will return the dis-
play to the standard screen without storing.
2. Push the downarrow button to return to the first menu
item on the display.
TRIP COMPUTER
The Trip Computer is located in the instrument cluster. It
features a driver-interactive display (displays information
such as trip information, range, fuel consumption, average
speed, and travel time).
Trip Button
The TRIP button, located on the right steering column
stalk, can be used to display and to reset the previously
described values.
• A short button push displays the different values.
• A long button push resets the system and then starts a
new trip. New Trip
To reset:
•
Push and hold the TRIP button to reset the system
manually.
• When the “Trip distance” reaches 99999.9 miles or
kilometers or when the “Travel time” reaches 999.59 (999
hours and 59 minutes), the system is reset automatically.
• Disconnecting/Reconnecting the battery resets the sys-
tem.
NOTE: If the reset operation occurs in the presence of the
screens concerning Trip A or Trip B, only the information
associated with Trip A or Trip B functions will be reset.
Start Of Trip Procedure
With the ignition on, push and hold the TRIP button for
over two seconds to reset trip information.
Exit Trip
1. To exit the Trip function, wait until all the values have been displayed or hold the MENU button for longer
than one second.
4
GETTING TO KNOW YOUR INSTRUMENT PANEL 81

Spare Tire......................... .278, 280
Spinning .............................. .274
Trailer Towing .......................... .187
Tread Wear Indicators .....................275
Wheel Nut Torque ....................... .290
Tire Safety Information ...................... .261
Tire Service Kit ........................... .222
Tongue Weight/Trailer Weight .................185
To Open Hood .............................60
Towing ................................. .182
Disabled Vehicle ........................ .233
Guide ................................ .185
Recreational ........................... .191
Weight ............................... .185
Towing Vehicle Behind A Motorhome ............191
Traction ................................ .192
Traction Control ............................97
Trailer Sway Control (TSC) ....................101
Trailer Towing ............................ .182
Cooling System Tips ..................... .190
Hitches ............................... .184
Minimum Requirements ....................185
Tips ................................. .189
Trailer And Tongue Weight ..................185
Wiring ............................... .188Trailer Towing Guide
....................... .185
Trailer Weight ............................ .185
Transaxle Automatic ..............................19
Transmission ............................. .161
Automatic ...................... .160, 161, 257
Maintenance ........................... .257
Transporting Pets ......................... .147
Tread Wear Indicators ...................... .275
Trip Computer .............................82
Turn Signals ...............................91
Uconnect Voice Command ....................317
Uniform

Tire Quality Grades ..................283
Untwisting Procedure, Seat Belt ................112
Vehicle Certification Label ....................180
Vehicle Identification Number (VIN) .............290
Vehicle Loading .....................180, 181, 268
Vehicle Modifications/Alterations .................6
Vehicle Storage ......................... .54, 284
Viscosity, Engine Oil ....................... .245
Voice Recognition System (VR) .................317
Warning Lights (Instrument Cluster Description) .....91
342 INDEX