2018 Ram 3500 instrument cluster

If your vehicle is not equipped with a touchscreen, this
feature can be activated through the instrument cluster
display. Refer to “Instrument Cluster Display” in “Getting
To Know Your Instrument Panel” for further information.
Jack Location
The jack and jack tools are stored under the front passenger
seat.
Removal Of Jack And Tools (1500 Series)
To access the jack and jack tools, you must remove the
plastic access cover located on the side of the front passen-
ger ’s seat. To remove the cover, pull the front part of the
cover (closest to the front of the seat) toward you to release
a locking tab. Once the front of the cover is loose, slide the
cover toward the front of the seat until it is free from the
seat frame.
Jack Access Cover
7
IN CASE OF EMERGENCY 469

SCHEDULED SERVICING
Your vehicle is equipped with an automatic oil change
indicator system. The oil change indicator system will
remind you that it is time to take your vehicle in for
scheduled maintenance.
Based on engine operation conditions, the oil change
indicator message will illuminate. This means that service
is required for your vehicle. Operating conditions such as
frequent short-trips, trailer tow, extremely hot or cold
ambient temperatures, and E85 fuel usage will influence
when the “Oil Change Required” message is displayed.
Severe Operating Conditions can cause the change oil
message to illuminate as early as 3,500 miles (5,600 km)
since last reset. Have your vehicle serviced as soon as
possible, within the next 500 miles (805 km).
Your authorized dealer will reset the oil change indicator
message after completing the scheduled oil change. If a
scheduled oil change is performed by someone other than
your authorized dealer, the message can be reset by
referring to the steps described under “Instrument Cluster
Display” in “Getting To Know Your Instrument Panel”.1500 Models Only
NOTE:
Under no circumstances should oil change
intervals exceed 10,000 miles (16,000 km), twelve months
or 350 hours of engine run time, whichever comes first. The
350 hours of engine run or idle time is generally only a
concern for fleet customers.
2500 – 3500 Models Only
NOTE: Under no circumstances should oil change
intervals exceed 8,000 miles (13,000 km), twelve months or
350 hours of engine run time, whichever comes first. The
350 hours of engine run or idle time is generally only a
concern for fleet customers.
8
SERVICING AND MAINTENANCE 517

CAUTION!
Do not use chemical flushes in your transmission as
the chemicals can damage your transmission compo-
nents. Such damage is not covered by the New Vehicle
Limited Warranty.
Fluid Level Check — Eight-Speed Transmission
The fluid level is preset at the factory and does not require
adjustment under normal operating conditions. Routine
fluid level checks are not required, therefore the transmis-
sion has no dipstick. Your authorized dealer can check
your transmission fluid level using special service tools.
If you notice fluid leakage or transmission malfunction,
visit your authorized dealer immediately to have the
transmission fluid level checked. Operating the vehicle
with an improper fluid level can cause severe transmission
damage.
CAUTION!
If a transmission fluid leak occurs, visit your autho-
rized dealer immediately. Severe transmission damage
(Continued)
CAUTION!(Continued)
may occur. Your authorized dealer has the proper tools
to adjust the fluid level accurately.
Fluid Level Check — Six-Speed Transmission
It is best to check the fluid level when the transmission is
at normal operating temperature (170-180°F / 77-82°C).
This normally occurs after at least 15 miles (25 km) of
driving. At normal operating temperature the fluid cannot
be held comfortably between the fingertips. You can read
the transmission sump temperature in the instrument
cluster screen (refer to “Instrument Cluster Display” for
further information).
Use the following procedure to check the transmission
fluid level properly:
1. Monitor the transmission temperature using the instru-
ment cluster display, and operate the vehicle as required
to reach the normal operating temperature. If the trans-
mission is not functioning properly, or the vehicle
cannot be driven, see the NOTE and CAUTION below
about checking the fluid level at colder temperatures.
2. Park the vehicle on level ground.
554 SERVICING AND MAINTENANCE

Dual Rear Wheels — If Equipped
The tires used on dual wheel assemblies should be
matched for wear to prevent overloading one tire in a set.
To check if tires are even, lay a straight edge across all four
tires. The straight edge should touch all the tires.
NOTE:If your vehicle is equipped with a Tire Pressure
Information System (TPIS):
• The Tire Pressure Information System (TPIS) uses
unique sensors in the inner rear wheels to help identify
them from the outer rear wheels, because of this, the
inner and outer wheel locations can’t be switched. •
After a tire rotation is completed, as shown below, the
system can auto learn the locations of each sensor ID.
Auto learning/localization occurs when the vehicle ig-
nition status is changed from Off to On and speeds of
greater than 5 mph (8km/h) are obtained and remain
over 5 mph (8km/h) for at about a 15 minute period.
You may need to drive for 20 minutes to account slower
speeds and stops.
• If the tires are rotated incorrectly, The auto localization
of the TPIS sensors will fail to locate correctly resulting
in incorrect locations for the pressure values displayed
in the instrument cluster.
CAUTION!
•3500 Dual Rear Tires may only have one approved
direction of rotation. This is to accommodate the
asymmetrical design (tread pattern) of the On/Off-
Road tire and the use of Outline White Letter (OWL)
tires.
• When replacing a flat, the spare tire may have to be
remounted on the rim, or installed at a different
location, to maintain the correct placement of the tire
on the wheel relative to the tire/wheel position on
(Continued)
Tire Rotation
582 SERVICING AND MAINTENANCE

CAUTION!(Continued)
painted, or decorated surfaces of the interior may
causepermanent damage. Wipe away immediately.
• Damage caused by these type of products may not be
covered by your New Vehicle Limited Warranty.
Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
1. Clean with a wet soft cloth. A mild soap solution may be
used, but do not use high alcohol content or abrasive
cleaners. If soap is used, wipe clean with a clean damp
cloth.
2. Dry with a soft cloth.
Leather Parts
Mopar Total Clean is specifically recommended for leather
upholstery.
Your leather upholstery can be best preserved by regular
cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and
should be removed promptly with a damp cloth. Stubborn
soils can be removed easily with a soft cloth and Mopar
Total Clean. Care should be taken to avoid soaking your
leather upholstery with any liquid. Please do not use
polishes, oils, cleaning fluids, solvents, detergents, or
ammonia-based cleaners to clean your leather upholstery.
Application of a leather conditioner is not required to
maintain the original condition.
NOTE:
If equipped with light colored leather, it tends to
show any foreign material, dirt, and fabric dye transfer
more so than darker colors. The leather is designed for easy
cleaning, and FCA recommends Mopar total care leather
cleaner applied on a cloth to clean the leather seats as
needed.
CAUTION!
Do not use Alcohol and Alcohol-based and/or Ketone
based cleaning products to clean leather seats, as
damage to the seat may result.
8
SERVICING AND MAINTENANCE 589

Display
After pressing the “Display” button on the touchscreen, the
following settings will be available.
Setting NameSelectable Options
Display Mode AutoManual
Set Language English, Français, Español
Touchscreen Beep OnOff
Fuel Saver Display OnOff
NOTE:
The “Fuel Saver Display” feature will allow you to enable fuel saver mode and will be displayed in the instrument
cluster display.
Units — If Equipped
After pressing “Units” on the touchscreen, the following
will be available:
Setting Name Selectable Options
Units USMetric
616 MULTIMEDIA

Ignition Key Removal........................28
Illuminated Entry ...........................83
Immobilizer (Sentry Key) ......................33
Inside Rearview Mirror .................64, 65, 447
Instrument Cluster ..........................198
Instrument Panel Lens Cleaning ................589
Integrated Trailer Brake Controls ................426
Interior Appearance Care .....................587
Interior Lights ..............................80
Intermittent Wipers (Delay Wipers) ...............84
Introduction ................................4
Inverter Outlet (115V) .......................137
Jack Location ..........................468, 485
Jack Operation ............................468
Jump Starting ............................ .502
Key Fob Panic Alarm .............................23
Programming Additional Key Fobs ..........27, 34
Key Fob Battery Service (Remote Keyless Entry) .....24
Key Fob Programming (Remote Keyless Entry) ......27
Key-In Reminder ............................30
Keyless Enter-N-Go ..................... .39, 289
Lock The Vehicle’s Doors ................621, 641 Passive Entry
............................39
Passive Entry Programming ...........39, 621, 641
Key, Replacement ...........................34
Keys ....................................20
Key, Sentry (Immobilizer) ......................33
Lane Change And Turn Signals .................78
Lane Change Assist ..........................79
Latches ................................. .282
Hood .................................112
Lead Free Gasoline ........................ .596
Leaks, Fluid ............................. .282
Life Of Tires ............................. .572
Light Bulbs .......................... .281, 452
Lights .................................. .281
AirBag .........................189, 237, 279
Automatic Headlights ......................76
Brake Assist Warning ..................... .212
Brake Warning ......................... .190
Bulb Replacement ........................452
Cap

Top Clearance .......................458
Cargo .................................79
Center Mounted Stop ..................... .457
Courtesy/Reading ..................... .80, 82
Cruise ............................... .199
688 INDEX

Daytime Running.........................74
Engine Temperature Warning ................191
Exterior ...............................281
Fog ............................78, 197, 455
Four-Wheel Drive Indicator .................327
Hazard Warning Flasher ...................447
Headlights ..............................73
High Beam ..............................74
High Beam/Low Beam Select .................74
Hill Descent Control Indicator ...............214
Illuminated Entry .........................83
Interior ............................. .80, 82
Low Fuel ............................. .196
Malfunction Indicator (Check Engine) ..........192
Park ................................. .198
Passing ................................76
Seat Belt Reminder .......................189
Security Alarm ..........................191
Service ............................... .452
Side Marker ............................460
Tire Pressure Monitoring (TPMS) ..........194, 216
Traction Control ........................ .212
Transfer Case .......................... .327
Turn Signal ................78, 198, 281, 454, 456
Warning (Instrument Cluster Description) . . . .191, 198 Limited-Slip Differential
..................375, 557
Loading Vehicle ............................414
Tires................................. .564
Load Shed Battery Saver Mode .......................187
Battery Saver On ........................ .187
Electrical Load Reduction ...................187
Intelligent Battery Sensor ...................187
Locks Automatic Door ..........................42
Child Protection ..........................43
Power Door .............................38
Low Tire Pressure System .....................216
Lubrication, Body ..........................541
Lug Nuts ............................... .594
Maintenance Fr

ee Battery.....................526
Maintenance Schedule .......................517
Malfunction Indicator Light (Check Engine) . . . .192, 201
Manual, Service ............................680
Manual Transmission Fluid Level Check ........................557
Lubricant Selection .......................607
Memory Feature (Memory Seat) .................44
Memory Seat ............................44, 49
12
INDEX 689