CAUTION!
Do not contaminate the bulb glass by touching it with
your fingers or by allowing it to contact other oily
surfaces. Shortened bulb life will result.
Rear Tail/Stop, Turn Signal And Backup Lamps
1. Remove the two screws that pass through the bed sheetmetal.
2. Pull the outboard side of the lamp rearward far enough to unsnap the two receptacles on the outboard side of the lamp housing from the two plastic snap post retain-
ers in the outer box side panel.
3. Disconnect the wiring harness connectors from the bulb socket.
4. Rotate the bulb socket counterclockwise 1/4 turn to unlock it from the housing.
5. Pull the bulb straight out of the socket.
Tail Lamp Screw Locations
Pulling Out The Tail Lamp
456 IN CASE OF EMERGENCY
CAUTION!
Do not contaminate the bulb glass by touching it with
your fingers or by allowing it to contact other oily
surfaces. Shortened bulb life will result.
6. Reverse the procedure to install the bulb and housing.
Center High-Mounted Stoplamp (CHMSL) With
Cargo Lamp
1. Remove the two screws holding the housing/lens to the body as shown. 2. Separate the connector holding the housing and wiring
harness to the body.
3. Turn the desired bulb socket ¼ turn and remove the socket and bulb from housing.
4. Pull the desired bulb straight from the socket.
CHMSL Mounting Screw Locations
CHMSL Connector Location
7
IN CASE OF EMERGENCY 457
Tonneau Cover............................585
Tonneau Cover Cleaning .....................585
To Open Hood ............................112
Torque Converter Clutch ..................315, 323
Towing ............................. .416, 510
Disabled Vehicle ........................ .510
Guide .................................423
Recreational ............................436
Weight ............................... .423
Towing Vehicle Behind A Motorhome ............436
Traction .................................441
Traction Control .......................... .209
Trailer Sway Control (TSC) ....................213
Trailer Towing ............................ .416
Cooling System Tips ..................... .432
Hitches ............................... .422
Minimum Requirements ....................424
Mirrors ................................70
Tips ................................. .431
Trailer And Tongue Weight ..................423
Wiring ............................... .430
Trailer Towing Guide ........................423
Trailer Weight ............................ .423Transfer Case
............................ .557
Electronically Shifted ............327, 332, 336, 339
Fluid .................................607
Transmission ............................. .299
Automatic ....................299, 306, 315, 553
Fluid .................................607
Maintenance ............................553
Shifting ...............................297
Transporting Pets ..........................278
Tread Wear Indicators .......................572
Turn Signals .....................78, 198, 454, 456
Uconnect Customer Programmable Features .........623,644
Uconnect
Settings ........................613
Uconnect Settings .....................623, 644
Uconnect Settings Customer Programmable Features .......39, 621, 641
Passive Entry Programming ...........39, 621, 641
Uconnect Settings .....................621, 641
Uconnect Voice Command ....................656
Uniform Tire Quality Grades ..................583
12
INDEX 695
