2018 Peugeot 208 steering

2
.
.
Instrument panels 8
W arning and indicator lamps 1 0
Indicators
20
Trip computer

2
4
Setting the time and date

2
6
Lighting dimmer

2
7Remote control key

2
8
Central locking
3
0
Back-up procedures
3
0
Boot

32
Alarm

33
Electric windows
3
4
PEUGEOT i- Cockpit
3
6
Steering wheel adjustment
3

6
Mirrors
36
F

ront seats
3
8
One-piece bench seat
4

0
2/3 -1/3
split rear bench seat
4
0
Head restraints

4
1
Advice on heating and air conditioning

4
1
Heating


42
Manual air conditioning
4

3
Dual-zone automatic air conditioning
4

3
Recirculation of interior air

4
5
Front demisting – defrosting

4
5
Rear screen demisting - defrosting

4
6
Courtesy lamp

4
6
Interior ambient lighting
4

7
Sunroof blind

4
7
Interior fittings

4
8
Boot fittings

4
9
Rear shelf
5

0Lighting control stalk

5
1
Headlamp beam height adjustment
5
4
Cornering lighting
5
5
Wiper control stalk
5
5
Changing a wiper blade
5
7
General safety recommendations
5
8
Hazard warning lamps
5

8
Emergency or assistance call

5
9
Electronic stability control (ESC)

6
0
Seat belts
6

2
Airbags


65
Child seats

6
8
Deactivating the front passenger airbag
6

8
ISOFIX mountings and child seats
7

4
Child lock

7
9
InstrumentsAccess
Over view
Ease of use and comfort Lighting and visibility
Safety
Eco-driving
Instruments and controls 4
Contents

5
Steering mounted controls
1
Lighting control stalk
Direction indicators
2
Steering mounted controls
for the touch screen: volume, source change
3
Cruise control
Speed limiter
Memorising speeds
4
Steering mounted controls
for the audio system
Side switch panel
(Depending on version)Activation of Park Assist
or Deactivation of the rear parking
sensors
Deactivation of the DSC/ASR
system Deactivation of Stop & Start
Reinitialisation of the tyre under-
inflation detection (without touch
screen)
Deactivation of the interior
volumetric monitoring
Activation of the electric child lock
Headlamp beam height adjustment
Central switch panel
Central locking
Hazard warning lamps
5
Driver front airbag
Horn
6
Wiper control stalk
Trip computer
7
Steering mounted controls
for the touch screen
.
Over view

11
List of warning and indicator lamps
Warning/indicator lampStateCause Actions/Observations
Red warning/indicator lamps
STOPFixed, associated
with another warning
lamp, accompanied
by the display of
a
message and an
audible signal. Indicates a
serious fault with the
engine, braking system, power
steering or a
major electrical fault.Carry out (1) and then (2).
+ Engine diagnostic
system
Fixed.
A major engine fault has been
detected. Carry out (1) and then (2).
Maximum
engine coolant
temperature Fixed, with the needle
in the red zone.
The temperature of the cooling
system is too high. Carry out (1), then wait until the engine has cooled
down before topping up to the required level, if
necessary. If the problem persists, carry out (2).
Engine oil
pressure Fixed.
There is a
fault with the engine
lubrication system. Carry out (1) and then (2).
Battery charge Fixed. The battery charging circuit has
a
fault (dirty terminals, slack or cut
alternator belt, etc.).
Clean and retighten the terminals. If the warning lamp
does not go off when the engine is started, carry out (2).
1
Instruments

14
Warning/indicator lampStateCause Actions/Observations
Anti-lock braking
system (ABS) Fixed.
The anti-lock braking system has
a


fault.The vehicle retains conventional braking.
Drive carefully at moderate speed, then carry out (3).
Dynamic
stability control
(DSC)/Anti- slip
regulation (ASR) Flashing.
The DSC/ASR regulation is activated
if there is a
loss of grip or trajectory.
Fixed. The DSC/ASR system has a
fault. Carry out (3).
Power steering Fixed. The power steering has a
fault. Drive carefully at moderate speed, then carry out (3).
Low fuel level Fixed, with the needle
in the red zone. When it first comes on, around
5
litres of fuel remain in the tank.Refuel without delay to avoid running out of fuel.
Flashing, with the
needle in the red zone. Very little fuel remains in the tank.
Never drive until completely empty, this could
damage the emissions and injection systems.
Airbags Fixed. One of the airbags or seat belt
pretensioners is faulty. Carry out (3).
Foot on the
brake
Fixed.
Omission or insufficient pressure on
the brake pedal. With an automatic gearbox, with the engine running,
before releasing the parking brake, to move out of
position P
.
Instruments

29
When the vehicle is locked, if it is
unlocked without the opening of a door
or the boot, it will automatically lock itself
again after thirty seconds.
Locating your vehicle
F A press switches on the vehicle's lighting and flashes the direction
indicators for a
few seconds to
help you locate your vehicle.
Guide-me-home lighting
Make a long press on this button to
o perate the guide-me-home lighting
(switching on the sidelamps, dipped
beams and number plate lamps).
A second press before the end of the timed
period cancels the guide-me-home lighting.
Deadlocking
Deadlocking deactivates the exterior and
interior door controls as well as the central
locking button on the dashboard.
You must therefore never leave anyone
inside the vehicle when it is deadlocked.
With the key
F Turn the key to the rear in the driver's door lock.
F

T
urn the key to the rear again within
5
seconds to deadlock the vehicle.
With the remote control
F Press this button once to lock the vehicle fully.
F

P
ress this button again within
5
seconds to deadlock the
vehicle.
Deadlocking is confirmed by fixed
lighting of the direction indicators for
approximately 2


seconds.
Depending on the version you have, the
electric door mirrors fold at the same time.
Advice
Remote control
The high frequency remote control is
a
sensitive system; do not operate it while
it is in your pocket as there is a
possibility
that it may unlock the vehicle, without you
being aware of it.
Do not press the buttons of your remote
control out of range and out of sight of
your vehicle. It might stop working. It will
then be necessary to reinitialise it again.
The remote control does not operate when
the key is in the ignition, even when the
ignition is switched off.
Anti-theft protection
Do not make any modifications to the
electronic engine immobiliser system; this
could cause malfunctions.
For vehicles with an ignition switch, do
not forget to remove the key and turn the
steering wheel to engage the steering
lock.
The automatic folding and unfolding of the
door mirrors can be deactivated via the
vehicle's configuration menu.
2
Access

36
PEUGEOT i-Cockpit
Once these adjustments have been made,
make sure that the "head-up" instrument
panel can be viewed correctly over the
smaller diameter steering wheel.
Steering wheel adjustment
For safety reasons, these adjustments
must only be made with the vehicle
stationary.
Mirrors
Door mirrors
As a safety measure, the mirrors should
b e adjusted to reduce the "blind spot".
Manual adjustments
F Operate the lever in the four directions to adjust the angle of the mirror glass.
Folding
F

F
old the mirror manually to protect it when
the vehicle is parked.
F

U
nfold it before moving off again.
They do not have automatic defrosting.
F

W

ith the vehicle stationary
, pull the
control lever to release the steering wheel.
F

A

djust the height and reach to suit your
driving position.
F

P

ush the control lever to lock the adjustment
mechanism.
Before taking to the road and in order to take
advantage of the specific ergonomics of the
PEUGEOT i-Cockpit, adjust it in the following order:
-

t
he height of the head restraint,
-

t
he seat backrest angle,
-
t

he seat cushion height,
-

t
he longitudinal position of the seat,
-
t

he depth and then the height of the steering
wheel,
-

t
he rear view mirror and door mirrors.
Ease of use and comfort

49
12 V accessory socket
F To connect a 12 V accessory (maximum
power: 120 watts), lift the cover and plug in
the correct adapter.
Do not exceed the maximum power rating
of the socket (risk of damage to your
accessory).
USB socket
The USB socket allows the connection of
a portable device, such as an iPod®-type digital
audio player, or a

USB memory stick.
The USB reader reads your audio files, which
are then transmitted to your audio system and
played via the vehicle's speakers.
These files are managed via the steering wheel
controls or from the audio system.
When connected to the USB socket,
the portable device can be charged
automatically.
While charging, a message is displayed
if the power consumption of the portable
device exceeds the amperage supplied by
the vehicle.
Boot fittings
1.Rear shelf
2. Hooks
3. Boot lamp
4. Stowing rings (depending on version)
The connection of an electrical device
not approved by PEUGEOT, such as
a

USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio
reception or inter ference with displays in
the screens.
For more detail on the Audio equipment and
telematics, and particularly the USB socket,
refer to the corresponding part of the audio
equipment section. The USB socket also allows a
smartphone to
be connected by MirrorLink
TM, Android Auto®
or CarPlay®, so that certain applications on the
smartphone can be used on the touch screen.
3
Ease of use and comfort

55
Cornering lighting
Activation
DeactivationWith dipped or main beam headlamps, this
system makes use of the beam from a front
foglamp to illuminate the inside of a
bend,
when the vehicle speed is below 25
mph
(approximately 40
km/h) (urban driving, winding
road, intersections, parking manoeuvres, etc.).
Without cornering lighting With cornering lighting
This function operates:
-

w
hen the corresponding direction indicator
is switched on,
or
-

f
rom a certain angle of rotation of the
steering wheel.
The system does not operate:
-

b
elow a certain angle of rotation of the
steering wheel,
-

a
bove 25 mph (40 km/h),
-
w

hen reverse gear is engaged.
Programming
It is possible to activate or deactivate
the cornering lighting from the
Driving/Vehicle menu.
This system is activated by default.
Wiper control stalk
In wintry conditions, remove snow, ice or
frost present on the windscreen, around
the wiper arms and blades and the
windscreen seal, before operating the
wipers.
Do not operate the wipers on a
dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
4
Lighting and visibility