2018 MITSUBISHI MIRAGE light

2
DRIVER’S VIEW
1 Side Mirror Adjustment ..............
Page 4
2 Headlights
....................... Page 4
3 Windshield Wiper Lever ..............
Page 4
4 Seat Heaters ......................
Page 4
5 Cruise Control (if equipped)
..........Page 5
6 Multi-Information Display (MID) .......
Page 5
7 ASC Off Switch
.................... Page 6
8 Start/Stop Engine Switch
(if equipped with FAST-key) ..........Page 6
9 Climate Controls ...................
Page 7
10 Audio Remote Control Switches
(if equipped) ..................... Page 8
11 Audio System .................. Page 8, 10
12 Bluetooth® Controls
.............. Page 8-9
1
2
10
5
12
7
86

4CONTROLS
The wipers will operate once.
OFF
Intermittent (Speed sensitive)
Slow
Fast
WINDSHIELD WIPERS (MIRAGE)The wipers will operate once.
OFF
Intermittent (Speed sensitive)
Slow
Fast
WINDSHIELD WIPERS (G4)
REGULAR HEADLIGHTS
Headlights and other lights on.
Parking, tail, front and rear
sidemarker lights, license plate
and instrument panel lights on.
All lights off.
Pull lever toward driver to
activate high beams.SIDE MIRROR ADJUSTMENTThe side mirrors can be adjusted when the ignition
switch is in the “ON” or “ACC” position or the
operation mode is put in ON or ACC.
Move the lever
to the same side as the mirror you
wish to adjust.
SEAT HEATER SWITCH (IF EQUIPPED)
POSITION ACTION
HI For quick heating
NEUTRAL Heater off
LO Keeps seat warm
REAR WINDOW WIPER AND WASHER (MIRAGE)
Turn the knob [B] to operate the rear
window wiper.
The wiper operates continuously
for several seconds then operates
intermittently at intervals of about 8
seconds.
Washer fluid is sprayed, the wiper will
automatically operate 2 or 3 times.

5OWN THE ROAD
CRUISE CONTROL (IF EQUIPPED)
CRUISE CONTROL ON/OFF SWITCH
Used to turn on and off the cruise control.
SET – SWITCH
Used to reduce the set speed and to set the desired
speed.
RES + SWITCH
Used to increase the set speed and to return to the
original set speed.
CANCEL SWITCH
Used to deactivate the set speed driving.
NOTE:When operating the cruise control switches, press the cruise control swi\
tches
correctly. The set speed driving may be deactivated automatically if two\
or more
switches of the cruise control are pressed at the same time. Minimum spe\
ed to
operate cruise control is about 25 mph.
TEMPERATURE INDICATOR L AMP OPERATION
1. TEMPERATURE INDICATOR ILLUMINATED GREEN
When the temperature indicator lamp is
illuminated Green this indicates the engine has
not reached normal operating temperature.
NOTE: This will result in cooler heater outlet
temperatures until engine reaches normal
operating temperatures.
2. TEMPERATURE INDICATOR LAMP OFF When the temperature indicator lamp is Off this indicates the engine is at normal
operating temperature.
3. TEMPERATURE INDICATOR LAMP ILLUMINATED RED
When the temperature indicator is illuminated Red this indicates the engine is overheating NOTE: If the engine is overheating, find a safe place to park the vehicle, then shut the
engine off and call Roadside Assistance as continued driving could cause\
the engine
to fail.
MULTI-INFORMATION DISPLAY SWITCH
Each time you lightly press the multi-information display switch (A), \
the display switches in the following order.
NOTE:
• When the ignition switch or the operation mode is in OFF, the driving ra\
nge display and average fuel consumption display are not displayed.
• While driving, the service reminder is not displayed even if you operate\
the multi-information display switch.1. Odometer
2. Trip Odometer - A
3. Trip Odometer - B
4. Miles to Empty/ Instrument Panel Light Dimmer Control
NOTE: Dimmer control is able to be used when the small (position)
light or headlight is in the ON position. Press and hold the
Multi-Information Display Switch to cycle through the different
illumination positions
5. Driving range display
6. Average fuel consumption display
7. Outside Temperature
8. Service reminder (distance)
9. Service reminder (months) (Mirage hatchback model only)

6When the vehicle is placed in Reverse, the rearview camera system
automatically activates. A wide-angle view behind the vehicle is shown.TECHNOLOGY
KEYLESS ENTRY SYSTEM (IF EQUIPPED)REARVIEW CAMERA
START/STOP ENGINE SWITCH (IF EQUIPPED WITH FAST-KEY) ACTIVE STABILITY CONTROL (ASC) OFF SWITCH
TIRE PRESSURE MONITORING SYSTEM (TPMS)
While carrying the FAST-key within the operating range, the Start/
Stop button can be used to start the engine.

• Move the selector lever in “P” position and hold the brake
pedal Down. Push the Start/Stop button.
• To stop the engine, stop the vehicle completely and move the
selector lever to “P” then press the Start/Stop button.
*If you have to bring the engine to an emergency stop while driving, pre\
ss and
hold the Start/Stop button for 3 seconds or more, or press it quickly 3 \
times
or more.
• If you press the Start/Stop button without depressing the brake pedal, y\
ou can
change the operation mode in the order of OFF, ACC, ON, OFF.
• If the engine cannot be started or the operation mode cannot be changed,\

check the position of the FAST-key or the battery performance of the FAS\
T-key. You can deactivate the system by pressing down the “ASC OFF”
switch for 3 seconds or longer.
When the ASC is deactivated, the indicator will turn on. To reactivate
the ASC, momentarily press the “ASC OFF” switch; the indicator is \
turned off.
The Tire Pressure Monitoring System warning light illuminates
when one or more of your tires is significantly under inflated.
Please note that changes in the outside temperature may
decrease tire pressure causing the TPMS light to turn on. If the
TPMS light remains illuminated, check your tire pressure.
If the warning light illuminates, take the necessary measures referring \
to the
owner’s manual.
FAST-KEYNORMAL KEY
OPERATION INDICATOR LIGHT
LOCK (
) BUT TON
UNLOCK (
) BUT TON
TRUNK RELEASE (HOLD) BUT TON

( G 4 O N LY )
PANIC BUT TON
While carrying the FAST-key, press the driver’s door lock/unlock swit\
ch .
IF THE FAST-KEY IS NOT OPERATING PROPERLY
Remove the key from the FAST-key remote and
unlock the door manually. Then, insert the FAST-key
into the key slot in the floor console. Starting the engine and changing
the operation mode should be now possible. Remove the FAST-key from
the key slot after starting the engine or changing the operation mode.
ECO INDICATOR
This indicator will be displayed when fuel efficient driving
is achieved.

11
ACCESSING APPLE CARPLAY™ACCESSING ANDROID AUTO™
1. Make sure your iPhone® has iOS7.1 or later and that you are using a genuine
Apple Lightning® to USB cable.
2. Connect the Apple Lightning
® to USB cable to your phone and to the vehicle’s
USB port in the Center Console.
3. Apple CarPlay will automatically connect. To use the iPhone with CarPlay even
while locked, choose “Allow” on your iPhone’s screen after the first connection.
4. You can now operate Siri by pressing and holding the Steering Wheel Audio
Speech button until prompted on the screen. 1.
You must download the Android Auto app from the Google Play Store. This
process may take up to a couple of minutes.
2. Connect your manufacturers phone cable from your phone and into the vehicles
USB port located in the Center Console.
3. Follow your phone’s on screen instruction until you are connected to Android
Auto. You can press the Speech button on the Steering Wheel Audio Controls to
activate voice operation.
Apple CarPlay, iPhone, Siri and Lightning are trademarks of Apple Inc., \
registered in the U.S. and other Countries. Android, Android Auto, Googl\
e Play and other marks are trademarks of Google Inc.
SMARTPHONE LINK DISPLAY AUDIO (SDA) (IF EQUIPPED)

12
Q: Is my phone compatible with the factory Mitsubishi Bluetooth® Hands Free System?
A: Check the list of compatible phones, www.mitsubishicars.com/owners to see if the phone is Bluetooth® supported.
Q: How do I use Bluetooth
® Audio?
A: Please refer to your Owner’s Manual for instructions.
Q: Why does my Anti-Lock Braking System (ABS) make a noise?
A: Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right front eng\
ine
compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.
Q: Why does the Audio System take so long to upload my music from my audio music device?
A: The Mitsubishi system can read multiple device structures in order to catalog the music files for easy playing and listening. Depending on the amount
of music you have on your device, this may take a few minutes.
Q: How can I play music from my portable music player through the stereo system in my vehicle when equipped with the Bluetooth
® Phone System?
A: Once your device is paired to the Bluetooth® Phone System, you can stream music from your device to your vehicle’\
s sound system. No wires or cords.
Your music stops and restarts at the same song when you exit and when you re-enter the vehicle. Voice commands are not available.
Q: My Mirage has a 12V accessory outlet. What devices can I plug in to it?
A: This outlet is protected with a 15 amp fuse. Always check the current draw rating of any device prior to use in the vehicle. If the devi\
ce is rated above
10 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).
Q: How can I get the MPG stated on the window sticker?
A: Vehicle driving styles will greatly affect MPG. Avoid sudden starts from a stop and let the vehicle coast to a traffic light. Both of these styles will
increase mileage and reduce brake lining wear.
• Vehicles are designed to achieve the best fuel mileage when they are driven at the speed limits on the freeway. Avoid driving over 6\
5 mph.
• Under inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per \
gallon.
Proper tire pressure also ensures optimum tire performance (including tire wear.)
Q: Why does my check engine light come on after I put gas in my car?
A: There are many reasons why your check engine light may illuminate. Before calling your dealership, make sure the fuel cap is fully eng\
aged and you
have heard three clicks when tightening it. After checking and hearing three clicks and the light is still on, contact your dealership.
Q: How do I use the emergency key when the FAST-key battery or vehicle battery is run down?
A: If your Mirage is equipped with a Start/Stop Engine switch and the door does not open, take the key out from the fob and unlock the fron\
t passenger
door manually. Put the key back into the fob and insert it into the slot provided below the Climate Control Switches. Starting the engine and\
charging
the operation mode should now be possible. Remove the FAST-key from the key slot after starting the engine or charging the operation mod\
e.
FAQ’S