9AUDIO / BLUETOOTH®
This HD Radio receiver enables:
PSD Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song name,
artist, station IDs, HD2/HD3 Channel Guide, and other
relevant data streams.
HD2/HD3 Adjacent to traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, original
music as well as deep cuts into traditional genre.
DIGITAL SOUND Digital, CD-quality sound. HD Radio Technology enables
local radio stations to broadcast a clean digital signal.
AM sounds like today’s FM and FM sounds like a CD. To Register a Bluetooth Device:
1.
Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the NEW DEVICES
(If no Bluetooth devices are registered, Step 3 is not required)
• If the Bluetooth device is permitted to pair then it will allow the
connection to be made.
• Supports Ver. 2.1 + EDR
• Supported profiles: Bluetooth Audio A2DP(V1.1), AVRCP(V1.3);
Hands-free HFP(v1.5); Phonebook transfer PBAP(v1.0)
When Bluetooth is connected, 3 icons will display – the antenna level
(1 to 6), battery, Bluetooth connected (shown on the HOME screen) BLUETOOTH INFORMATION
TO ADJUST THE CLOCK
1. Press the HOME key
2. Touch SETTING, then CLOCK
- At this point, changes to the clock setting (time and format) can be
adjusted such as time format and time setting.
3. Touch SET
4. To return to the settings, touch BACK
5. The time setting changes is completed
10SMARTPHONE LINK DISPLAY AUDIO (SDA) (IF EQUIPPED)
SETTING THE CLOCK
TO CHANGE THE CLOCK ON ON YOUR SMARTPHONE DISPL AY AUDIO (SDA)
1. From the Home screen, touch Setup
2. From the Setup screen, touch Clock
You can now adjust the time and date.
SMARTPHONE LINK DISPLAY AUDIO (SDA) (IF EQUIPPED)
A
F
G
H
I
JB
C
D
E
A - CD Slot
B - Power & Volume Knob
C - EJECT Button (Eject CD)
D - SEEK Button (Selects next station or track)
E - TRACK (Selects previous station or track)
F - Tune and Illumination Knob (Radio Station)
G - HOME Button (Return to initial display)
H - RADIO (FM1, FM2, AM)
I - Touch Screen Display
J - RESET (Reboot and clear all presets)
