6When the vehicle is placed in Reverse, the rearview camera system
automatically activates. A wide-angle view behind the vehicle is shown.TECHNOLOGY
KEYLESS ENTRY SYSTEM (IF EQUIPPED)REARVIEW CAMERA
START/STOP ENGINE SWITCH (IF EQUIPPED WITH FAST-KEY) ACTIVE STABILITY CONTROL (ASC) OFF SWITCH
TIRE PRESSURE MONITORING SYSTEM (TPMS)
While carrying the FAST-key within the operating range, the Start/
Stop button can be used to start the engine.
• Move the selector lever in “P” position and hold the brake
pedal Down. Push the Start/Stop button.
• To stop the engine, stop the vehicle completely and move the
selector lever to “P” then press the Start/Stop button.
*If you have to bring the engine to an emergency stop while driving, pre\
ss and
hold the Start/Stop button for 3 seconds or more, or press it quickly 3 \
times
or more.
• If you press the Start/Stop button without depressing the brake pedal, y\
ou can
change the operation mode in the order of OFF, ACC, ON, OFF.
• If the engine cannot be started or the operation mode cannot be changed,\
check the position of the FAST-key or the battery performance of the FAS\
T-key. You can deactivate the system by pressing down the “ASC OFF”
switch for 3 seconds or longer.
When the ASC is deactivated, the indicator will turn on. To reactivate
the ASC, momentarily press the “ASC OFF” switch; the indicator is \
turned off.
The Tire Pressure Monitoring System warning light illuminates
when one or more of your tires is significantly under inflated.
Please note that changes in the outside temperature may
decrease tire pressure causing the TPMS light to turn on. If the
TPMS light remains illuminated, check your tire pressure.
If the warning light illuminates, take the necessary measures referring \
to the
owner’s manual.
FAST-KEYNORMAL KEY
OPERATION INDICATOR LIGHT
LOCK (
) BUT TON
UNLOCK (
) BUT TON
TRUNK RELEASE (HOLD) BUT TON
( G 4 O N LY )
PANIC BUT TON
While carrying the FAST-key, press the driver’s door lock/unlock swit\
ch .
IF THE FAST-KEY IS NOT OPERATING PROPERLY
Remove the key from the FAST-key remote and
unlock the door manually. Then, insert the FAST-key
into the key slot in the floor console. Starting the engine and changing
the operation mode should be now possible. Remove the FAST-key from
the key slot after starting the engine or changing the operation mode.
ECO INDICATOR
This indicator will be displayed when fuel efficient driving
is achieved.
9AUDIO / BLUETOOTH®
This HD Radio receiver enables:
PSD Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song name,
artist, station IDs, HD2/HD3 Channel Guide, and other
relevant data streams.
HD2/HD3 Adjacent to traditional main stations are extra local FM
channels. These HD2/HD3 Channels provide new, original
music as well as deep cuts into traditional genre.
DIGITAL SOUND Digital, CD-quality sound. HD Radio Technology enables
local radio stations to broadcast a clean digital signal.
AM sounds like today’s FM and FM sounds like a CD. To Register a Bluetooth Device:
1.
Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the NEW DEVICES
(If no Bluetooth devices are registered, Step 3 is not required)
• If the Bluetooth device is permitted to pair then it will allow the
connection to be made.
• Supports Ver. 2.1 + EDR
• Supported profiles: Bluetooth Audio A2DP(V1.1), AVRCP(V1.3);
Hands-free HFP(v1.5); Phonebook transfer PBAP(v1.0)
When Bluetooth is connected, 3 icons will display – the antenna level
(1 to 6), battery, Bluetooth connected (shown on the HOME screen) BLUETOOTH INFORMATION
TO ADJUST THE CLOCK
1. Press the HOME key
2. Touch SETTING, then CLOCK
- At this point, changes to the clock setting (time and format) can be
adjusted such as time format and time setting.
3. Touch SET
4. To return to the settings, touch BACK
5. The time setting changes is completed
