2018 MERCEDES-BENZ SLC steering wheel

X
Press the d or c button to select the
Auto. Mirror Folding function.
If the Auto. Mirror Folding function is
switched on, the multifunction display shows
the exterior mirror in orange. X
Press the v button to save the setting.
Restoring the factor ys ettingsX
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Factory Setting submenu.X
Press v to confirm.
The Reset All Settings? function
appears. X
Press the d or c button to select No or
Yes .X
Press the v button to confirm the selec-
tion.
If you have selected Yes
and confirmed, the
multifunction display shows ac onfirmation
message.
For safety reasons, the Daytime Running
Lights function in the Lights submenu is only
reset if the vehicle is stationary.
AMG menu (Mercedes-AMG SLC 43)
Warm-up
C
Digital speedometer
D
Gear indicator

Hiding display messages X
Press the v or 8 button on the steering wheel.
The multifunction display hide st he display message.
High-priority display messages are show ninr ed in the multifunction display .S ome high-priority
display messages cannot be hidden.
The multifunction display show st hese messages continuously until the causes for the messages
have been remedied.
Message memory The on-board compute rs ave sc ertain display messages in the messag em emory .Y ou can call up
the display messages: X
Press the Y or e button on the steering whee ltos elect the Serv. menu.
If there are display messages, the multifunction display shows 2M essages ,f or example.X
Press the c or d button to select the entry, e.g. 2M essages .X
Press v to confirm.X
Press the c or d button to scroll through the display messages.
When the ignitio niss witched off, all display messages are deleted, apart from some high-priority
display messages. Once the causes of the high-priority display messages have been rectified, the
corresponding display messages are als od eleted.178
Display messages
On-board computer and displays

Display messages
Possible causes/consequences and P Solutions
Cruise Contro l--
-m ph Cruis ec ontro lc anno tbea ctivated, since no ta ll of th ea ctivation con-
dition sh av eb een met .X
Chec kt he activation condition sf or cruise control ( Y
page 138).
Cruise Contro l Inop‐
erativ e Cruis ec ontro lism alfunctioning .
Aw arning tone also sounds. X
Visit aq ualified specialist workshop .
Tires Display messages
Possible causes/consequences and P Solutions
Check Tir e Pressure
Soo n Canada only:
The tire pressur el oss warning system has detecte das ignificant loss
in pressure.
Aw arning tone also sounds.
Possibl ec auses: R
you hav ec ha nged th ep osition soft he wheels and tires or installed
ne ww heels and tires R
th et ir ep ressur eino ne or mor et ir es has dropped
G WARNIN G
Tir ep ressures that are to ol ow pos et he followin gh azards :R
they may burst, especially as th el oad and vehicl es peed increas eR
they may wear excessivel ya nd/o ru nevenly, whic hm ay greatl y
impair tire traction .R
th ed rivin gc ha racteristics ,asw ell as steering and braking ,m ay be
greatl yi mpaire d
There is ar is kofana ccident.X
Stop th ev ehicl ew ithout making any sudden steering or braking
maneuvers .P ay attention to th et ra ffic condition sasy ou do so.X
Secur et he vehicl ea gainst rollin ga way ( Y
page 131).X
Chec kt he tires and ,ifn eces sary, follow th ei nstruction sf or af lat
tire ( Y
page 246). X
Chec kt he tire pressures and ,ifn eces sary, correc tt he tire pressure.X
Restart th et ir ep ressur el oss warning system when th et ir ep res-
sur eisc orrect ( Y
page 267).
Check Tir e Pressure
The nR estar tR un
Fla tI ndicator Canada only:
The tire pressur el oss warning system generated ad isplay message
and has no tb een restarte ds ince .X
Se tt he correc tt ir ep ressur eina ll fou rt ir es .X
Restart th et ir ep ressur el oss warning system ( Y
page 267).196
Display messages
On-boar dc omputer an dd isplays

X
Press MB Info call button C .
This initiates ac all to the Mercedes-Benz Cus-
tomer Assistance Center.
The indicator lamp in MB Info call button C
flashes while the connection is being made.
The multifunction display shows the Con‐
necting Call message. The audio system is
muted.
If ac onnection can be made, the Call Con‐
nected message appears in the multifunction
display.
If am obile phone networ ka nd GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example: R
curren tl ocation of the vehicleR
vehicle identification number
i The display of the multimedia system indi-
cates that ac all is active. During the call, you
can change to the navigation menu by press-
ing the NAVI button on COMAND ,f or exam-
ple.
Voice output is not available.
Av oice connection is established between the
Mercedes-Benz Customer Assistance Center
and the vehicle occupants.
You receive information about operating your
vehicle, about the nearest authorized
Mercedes-Benz Center and about other prod-
ucts and services from Mercedes-Benz.
USA only: you can find further information on
the mbrace system under "Owners Online" at
http://www.mbusa.com.
i The system has not been able to initiate an
MB Info call, if: R
the indicator lamp in MB Info call button C
is flashing continuously. R
no voice connection to the Mercedes-Benz
Customer Assistance Center was estab-
lished.
This can occur if the relevant mobile phone
networ kisn ot available, for example.
The Call Failed message appears in the
multifunction display. X
To end ac all: press the v button on the
multifunction steerin gw heel.
or X
Press the corresponding multimedia system
button for ending ap hone call. Call priority When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergenc yc all
can still be initiated. In this case, an emergency
call will take priority and override all other active
calls.
The indicator lamp of the respective button
flashes until the call is ended.
An emergenc yc all can only be terminated by the
Mercedes-Benz Customer Assistance Center.
All other calls can be ended by pressing: R
the v button on the multifunction steering
wheel R
the corresponding button on the audio sys-
tem or on COMAND for ending at elephone
call
i When ac all is initiated, the audio system is
muted. The mobile phone is no longer con-
nected to COMAND .H owever, if you want to
use your mobile phone, do so only when the
vehicle is stationary and in as afe location.
Vehicle Health Check With the Vehicle Health Check, the Customer
Assistance Center can provide improved sup-
port for problems with your vehicle. During an
existin gc all, vehicle data is transferred to the
Customer Assistance Center. The customer ser-
vice representative can use the received data to
decide what kind of assistanc eisr equired. You
are then ,f or example, guided to the nearest
Mercedes-Benz Servic eC enter or ar ecovery
vehicle is called.
If vehicle data needs to be transferred during an
MB Info call or aR oadside Assistance call, this is
initiated by the Customer Assistance Center.
You will see the Roadside Assistance Con‐
nected message in the COMAND display. If the
vehicle remot em alfunction diagnosis can be
started, the Request for vehicle diagno‐
sis received. Start vehicle diagnosis?
message appears in the display. X
Confirm the message with Yes .X
When the Vehicle diagnosis: Please
start ignition message appears, turn the
SmartKey to position H in the ignition lock
( Y
page 116). X
When the Please follow the instruc‐
tions received by phone and move
your vehicle to as afe position mes-Features 227
Stowage and features Z

Important safety notes The tire pressur ew arning system does no tw arn
you of an incorrectl ys et tire pressure. Observ e
th en otes on th er ecommended tire pressur e
( Y
page 263).
The tire pressur el oss warning does no tr eplace
th en ee dtor egularly chec kt he tire pressure. An
eve nl oss of pressur eons everal tires at th e
sam et im ec anno tbed etecte dbyt he tire pres-
sur el oss warning system.
The tire pressur em onitor is no ta ble to warn you
of as udde nl oss of pressure, e.g. if th et ir ei s
penetrated by af oreign object. In th ee vent of a
sudde nl oss of pressure, brin gt he vehicl etoa
halt by braking carefully. Avoid abrup ts te ering
movements.
The function of th et ir ep ressur el oss warning
system is limite dord elaye di f:R
snow chain sa re mounte dony our vehicle's
tires .R
road condition sa re wintry.R
you are driving on san dorg ravel.R
you adopt av er ys port yd riving style (corner-
ing at high speeds or driving wit hh igh rates of
acceleration). R
you driv ew it hah eav yl oad.
Restarting th et ir ep re ssure loss warn-
ing system Restart th et ir ep ressur el oss warning system if
you have :R
changed th et ir ep ressur eR
changed th ew heels or tiresR
mounte dn ew wheels or tiresX
Before restarting ,m ak es ur et ha tt he tire
pressures are set properly on all four tires for
th er espective operating conditions.
The recommended tire pressur ec an be foun d
on th eT ir ea nd Loading Information placard
on th eB -p illar .A dd itionally, at ir ep ressur e
table is attached to th ef uel filler flap .T he tire
pressur el oss warning system can only giv e
reliable warning sify ou have set th ec orrect
tire pressure. If an incorrec tt ir ep ressur ei s
set ,t he se incorrec tv alue sw ill be monitored.X
Als oo bserv et he note sint he section on tire
pressures ( Y
page 263).X
Mak es ur et ha tt he SmartKey is in position H
in th ei gnition loc k( Y
page 116). X
Press th e Y or e butto nont he steering
whee lt os elect th e Serv. menu.X
Press th e c or d butto ntos elect
Tir eP ressure . X
Press th e v button.
The Run Fla tI ndicator Active Press
'OK 'toR estar t message appear sint he
multifunction display.
If you wish to confirm th er estart :X
Press th e v button.
The Tir eP ressure Now OK? message
appear sint he multifunction display. X
Press th e c or d butto ntos elect Yes .X
Press th e v button.
The Run Fla tI ndicator Restarted mes -
sage appear sint he multifunction display.
Afte rat ea ch-in period, th et ir ep ressur el oss
warning system will monitor th es et tire pres-
sures of all four tires .
If you wish to cancel th er estart :X
Press th e 8 button.
or X
If th e Tir eP ressure Now OK? message
appears, use th e c or d butto nt o
select Cancel . X
Press th e v button.
The tire pressur ev alue ss to re datt he last
restar tw ill continue to be monitored.
Tire pressure monitor
General notes If at ir ep ressur em onitor is installed, th ev ehi-
cle's wheels hav es ensor st ha tm onitor th et ir e
pressures in all four tires .T he tire pressur em on -
itor warn sy ou if th ep ressur ed rops in on eo r
mor eoft he tires .T he tire pressur em onitor only
function sift he corresponding sensor sa re
installed in all wheels.
Information on tire pressures is displayed in th e
multifunction display. Afte raf ew minute so f
driving ,t he curren tt ir ep ressur eofe ac ht ir ei s
shown in th e Serv. men uoft he multifunction
display. Tire pressure 267
Wheels and tires Z

The tire pressure monitor has ay ellow warning
lamp in the instrument cluster for indicating
pressure loss or am alfunction. Whether the
warning lamp flashes or lights up indicates
whether at ire pressure is too low or the tire
pressure monitor is malfunctioning: R
if the warning lamp is lit continuously, the tire
pressure on one or more tires is significantly
too low. The tire pressure monitor is not mal-
functioning. R
if the warning lamp flashes for approximately
am inute and then remains lit constantly, the
tire pressure monitor is malfunctioning.
In addition to the warning lamp, am essage
appears in the multifunction display .O bserve
the information on display messages
( Y
page 196).
It may take up to ten minutes for am alfunction
of the tire pressure monitor to be indicated. A
malfunction will be indicated by the tire pres-
sure warning lamp flashing for approximately
one minute and then remaining lit. When the
malfunction has been rectified, the tire pressure
warning lamp goes out after af ew minutes of
driving.
The tire pressure values indicated by the on-
board computer may differ from those meas-
ured at ag as station with ap ressure gage. The
tire pressures shown by the on-board computer
refer to those measured at sea level. At high
altitudes, the tire pressure values indicated by a
pressure gage are higher than those shown by
the on-board computer. In this case, do not
reduce the tire pressures.
The operation of the tire pressure monitor can
be affected by interferenc ef rom radio transmit-
ting equipment (e.g. radio headphones, two-way
radios) that may be being operated in or near the
vehicle.
Checking the tire pressur ee lectroni-
cally X
Make sure that the SmartKey is in position H
( Y
page 116) in the ignition lock. X
Press the Y or e button on the steering
wheel to select the Serv. menu.X
Press the c or d button to select
Tire Pressure .X
Press v .
The current tire pressure of each tire is shown
in the multifunction display. If the vehicle has been parked for over
20 minutes, the Tire pressure will be
displayed after driving af ew minutes
message appears.
After at each-in process, the tire pressure mon-
itor automatically detect sn ew wheels or new
sensors. As long as ac lear allocation of the tire
pressure value to the individual wheels is not
possible, the Tire Pressure Monitor Active
display message is shown instead of the tire
pressure display .T he tire pressures are already
being monitored.
If an emergenc ys pare wheel is mounted, the
system may continue to show the tire pressure
of the wheel that has been removed for af ew
minutes. Be aware that the value displayed for
the position where the emergenc ys pare wheel
is fitted is not the same as the current tire pres-
sure of the emergenc ys pare wheel.
Tire pressur em onitor warning mes-
sages The tire pressure monitor detect sap ressure
loss in one or more tires: R
If the tire pressure monitor detect sap ressure
loss in one or more tires, aw arning message
is shown in the multifunction display .T he yel-
low tire pressure warning lamp then lights up. R
If the Please Correct Tire Pressure
message appears in the multifunction display,
the tire pressure in at least one tire is too low.
The tire pressure must be corrected when the
opportunit ya rises. R
If the Check Tires message appears in the
multifunction display ,t he tire pressure in at
least one tire has dropped significantly. The
tires must be checked. R
If the Warning Tire Malfunction message
appears in the multifunction display ,t he tire
pressure in at least one tire has dropped sud-
denly. The tires must be checked.
Observe the instructions and safety notes in the
display messages in the "Tires" section
( Y
page 196).
If the wheel positions on the vehicle are rotated,
the tire pressures may be displayed for the
wrong positions for as hort time. This is rectified
after af ew minutes of driving, and the tire pres-
sures are displayed for the correc tp ositions.Tir ep re ssure 269
Wheels and tires Z

Restarting the tire pressure monitor Whe ny ou restart the tire pressure monitor, all
existing warning messages are deleted and the
warning lamps go out. The monitor uses the cur-
rentl ys et tire pressures as the reference values
for monitoring. In most cases, the tire pressure
monitor will automaticall yd etect the new refer-
ence value sa fte ry ou have changed the tire
pressure. However, yo uc an also set reference
value sm anually as described here. The tire
pressure monitor then monitors the new tire
pressure values. X
Set the tire pressure to the value recommen-
ded for the corresponding driving situation on
the Tire and Loading Information placard on
the driver' ss id eB -pillar ( Y
page 263).
Additiona lt ire pressure value sf or different
load sc an also be found on the tire pressure
table on the inside of the fue lf ille rf lap
( Y
page 263).X
Make sure that the tire pressure is correct on
al lf ou rw he els.X
Ensur et hat the SmartKey is in position H in
the ignition lock. X
Press the Y or e button on the steering
wheel to select the Serv. menu.X
Press the c or d button to select
Tire Pressure .X
Press v .
The multifunction display shows the current
tire pressure for the individual tire sort he
Tire pressure will be displayed
afte rd riving af ew minutes message.X
Press the d button.
The Use Current Pressures as New Ref‐
erence Values message appears in the mul-
tifunction display.
If you wish to confirm the restart: X
Press v .
The Tire Press. Monitor Restarted mes-
sage appears in the multifunction display.
After driving for af ew minutes, the system
checks whethe rt he current tire pressures are
within the specified range. The new tire pres-
sures are then accepted as reference values
and monitored.
If you wish to cance lt he restart:X
Press 8 .
The tire pressure value ss tore datt he last
restart will continu etobem onitored. Radio type approval for the tire pres-
sure monitor Country Radio type approval number
USA FCC ID: MRXMW2433A
FCCIC ID:MRXGG4 Thi sd evice
complies with part 15 of the FCC
rules and with license exempt
RSS standard sofI ndustry Can-
ada. Operation is subject to the
following conditions .( 1) This
device may not cause harmful
interference, and (2) Thi sd evice
mus ta ccept any interference
received, including interference
that may cause undesired oper-
ation. Le present apparei le st
conforme d'industri eC an ada
applicables au xa ppar eils radio
exempts de licence. L'exploita-
tion est authorisee au xd eu xc on-
ditions suivantes. (1) L'appareil
ne doi tp as produire de brouil-
lage, et (2) L'autisatue rdel 'ap-
parei ld oi ta ccepter tou tb rouil-
lage radioelectriqu es ubi, meme
si le brouillag ee st susceptible
d'e nc ompromettre le fonc-
tionnement. WARNING :C ha nges
or modifications not expressly
approved by the party responsi-
bl ef or compliance could voi dt he
user' sa ut hority to operate the
equipment. The term "IC:" before
the radio certification number
only signifies Canad at echnical
specifications were met.
FCC ID:MRXMC34MA4 This
device complies with part 15 of
the FCC rules and with license
exempt RSS standard sofI ndus-
try Canada. Operation is subject
to the following conditions .( 1)
Thi sd evice may not cause harm-
ful interference, and (2) This
device mus ta ccept any interfer-
ence received, inclu ding interfer-
e nce that may cause undesired
operation. Le present appareil
est conforme d'industri eC an ada
applicables au xa ppar eils radio
exempts de licence. L'exploita-
tion est authorisee au xd eu xc on-
ditions suivantes. (1) L'appareil270
Tire pressure
Wheel sa nd tires