2018 MERCEDES-BENZ METRIS brake

[x] Cancel search: brake

Page 154 of 318

MERCEDES-BENZ METRIS 2018  MY18 Operator’s Manual ready for use, the lane markings in the symbol
are shown as solid lines;.
Setting the sensitivity of Lane Keeping
Assist
XIn theAssist.menu on the on-board com-
puter, select the Lane Keeping Assist:

Page 155 of 318

MERCEDES-BENZ METRIS 2018  MY18 Operator’s Manual XSelectStatus Overviewin theAssist.menu and display the attention level
(Ypage 186).
The following information is displayed:
Rthe length of the journey since the last break.
Rthe attention level deter

Page 156 of 318

MERCEDES-BENZ METRIS 2018  MY18 Operator’s Manual parking and pulling away. Make sure that there
are no persons, animals or objects in the maneu-
vering area while maneuvering and parking in/
leaving parking spaces.
!Pay particular attention to obsta

Page 158 of 318

MERCEDES-BENZ METRIS 2018  MY18 Operator’s Manual Towing a trailer
PARKTRONIC detects a coupled trailer if your
vehicle is equipped with the corresponding elec-
trical installations for trailer towing.
PARKTRONIC is deactivated for the rear area
when

Page 160 of 318

MERCEDES-BENZ METRIS 2018  MY18 Operator’s Manual Active Parking Assist does not assist you park-
ing in spaces at right angles to the direction of
travel if:
Rtwo parking spaces are located directly next
to one another
Rthe parking space is directly

Page 161 of 318

MERCEDES-BENZ METRIS 2018  MY18 Operator’s Manual XBring the vehicle safely to a stop when the
parking symbol shows the desired parking
space in the instrument cluster.
XShift the transmission to positionR.
The display shows the Start
ParkAssist?Yes:

Page 162 of 318

MERCEDES-BENZ METRIS 2018  MY18 Operator’s Manual XTo cancel the process:press the%but-
ton on the steering wheel or drive off.
or
XTo exit the parking space using active
parking assistance: press theabutton
on the steering wheel.
The display shows t

Page 167 of 318

MERCEDES-BENZ METRIS 2018  MY18 Operator’s Manual Information on the audio system control knob
can be found in the separate operating
instructions.
Symbol=is highlighted. The distance spec-
ifications now only apply to objects that are at
the same le