2018 MERCEDES-BENZ GLE HYBRID oil level

[x] Cancel search: oil level

Page 13 of 398

MERCEDES-BENZ GLE HYBRID 2018  Owners Manual Emissions control
Service and warranty information .... 28
Engine
Check Engine warning lamp .......... .2 83
Display message ............................ 256
ECO start/stop function ................ 1

Page 167 of 398

MERCEDES-BENZ GLE HYBRID 2018  Owners Manual For more information on driving with summer
tires, see ( Y
page 353).
Observe the notes in the "Changing a wheel"
section ( Y
page 371).
Off-road driving
Important safety notes
G WARNING
If yo

Page 168 of 398

MERCEDES-BENZ GLE HYBRID 2018  Owners Manual Familiarize yourself with the characteristics of
your vehicle and the gear shift operation before
driving through difficult terrain.
The following driving systems are specially
adapted to off-road dri

Page 325 of 398

MERCEDES-BENZ GLE HYBRID 2018  Owners Manual When checking the oil level: R
park the vehicle on a level surface. R
the engine should be switched off for approx-
imately five minutes if the engine is at normal
operating temperature. R
if the engi

Page 326 of 398

MERCEDES-BENZ GLE HYBRID 2018  Owners Manual Further information on engine oil ( Y
page 387).
Additional service products
Important safety notes
G WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of

Page 327 of 398

MERCEDES-BENZ GLE HYBRID 2018  Owners Manual Adding washer fluid to the windshield
washer system
Example: washer flui d reservoirX
To open : pull cap �C upwards by th e tab .X
Ad d th e premixed washer fluid .X
To close: press cap �C onto th e f

Page 374 of 398

MERCEDES-BENZ GLE HYBRID 2018  Owners Manual be required earlier. Do not change the direction
of wheel rotation.
Clean the contact surfaces of the wheel and the
brake disc thoroughly every time a wheel is rota-
ted. Check the tire pressure and,

Page 391 of 398

MERCEDES-BENZ GLE HYBRID 2018  Owners Manual The antifreeze concentrate/corrosion inhibitor
concentration in the engine cooling system
should: R
be at least 50%. This will protect the engine
cooling system against freezing down to
approximately