2018 MERCEDES-BENZ GLC SUV sunroof

[x] Cancel search: sunroof

Page 19 of 390

MERCEDES-BENZ GLC SUV 2018  Owners Manual P
Paddle shifterssee Steering wheel paddle shifters
Paint code number ............................376
Paintwork (cleaning instructions) ... 326
Panic alarm .......................................... 4

Page 21 of 390

MERCEDES-BENZ GLC SUV 2018  Owners Manual Overview of bulb types .................. 117
Replacing front bulbs (vehicles
with halogen headlamps) ............... 117
Turn signals (front) .........................118
Reporting safety defects ...

Page 22 of 390

MERCEDES-BENZ GLC SUV 2018  Owners Manual Service messagesee ASSYST PLUS
Service products
Brake fluid .....................................3 80
Coolant (engine) ............................ 380
Engine oil .....................................

Page 94 of 390

MERCEDES-BENZ GLC SUV 2018  Owners Manual The switches on the driver's door take prece-
dence.
:Front left
;Front right
=Rear right
?Rear left
XTurn the SmartKey to position1or2 in the
ignition lock.
XTo open manually: press and hold the

Page 96 of 390

MERCEDES-BENZ GLC SUV 2018  Owners Manual Problems with the side windows
GWARNING
If you close a side window again immediately after it has been blocked or reset, the side window
closes with increased or maximum force. The reversing feature i

Page 97 of 390

MERCEDES-BENZ GLC SUV 2018  Owners Manual GWARNING
At high speeds the raised sliding sunroof auto-
matically lowers slightly at the rear. This could
trap you or other persons. There is a risk of
injury. Make sure that nobody reaches into
the

Page 98 of 390

MERCEDES-BENZ GLC SUV 2018  Owners Manual the vehicle interior is reduced as a result. At low
speeds it raises again automatically.
You can also temporarily deactivate automatic
lowering. To do so, press the3switch. The
panorama roof with pow

Page 99 of 390

MERCEDES-BENZ GLC SUV 2018  Owners Manual If somebody becomes trapped:
Rrelease the switch immediately, or
Rpress the switch in any direction during the
automatic closing process
The closing process is stopped.
Opening and closing the roller
Page:   1-8 9-16 next >