2018 MERCEDES-BENZ G-CLASS SUV buttons

Overview of climate control sy
stems Note
s on climate control An interior air
filter must alw ays be used so that
th e air conditioning sy stem, pollution le vel moni‐
to ring and the air filtering function workcor‐
re ctly. Ma kesure that thefilter is ins talled cor‐
re ctly and thefilter housing in the engine com‐
partment is closed cor rectly using the cap and
alw ays tightly sealed when in operation. Use fil‐
te rs recommended and appr ovedby Mercedes-
Benz. Alw ays ha veservice workcar ried out at a
qu alified specialist workshop. THERMOTRONIC control panel
overview The indicator lamps in
the buttons indicate that
th e cor responding function is activated. 1
w Setsthe driver's side temp erature
2 _ Setsthe driver's side air distribution
3 H Setsthe air flow or switches off climate
control
4 Ã Sets climate control toautomatic
mode (/ page133)
5 ¬ Demiststh e windscreen
6 ! Calls up the air conditioning menu Switches
residual heat on or off
(/ page 135)
7 ¤ Switches there ar wind owheater on or
off
8 Vehicles without a stationary heater:
¿ switches the A/C function on or off
(/ page 133)
Ve hicles with a stationary heater: &
swit ches thest ationary heater on or off
(/ page 135)
9 g Switches air- recirculation mode on or
off (/ page 134)
A _ Setsthe front passenger side air distri‐
bution
B w Setsthe front passenger side temp era‐
ture 13 2
Climate cont rol

R
Red:thest ationary heater is swit ched on.
R Yello w: the departure time is preselected.
The stationary heater/ stationary ventilation will
switch off au tomatically af ter 50 minutes.
Operation using the app: thest ationary
heater/ ventilation can also be operated via the
Mercedes me connect app. Further information
can be found in the separate Owner's Manual
under http://manuals.daimler.com/baix/cars/
connectme/en_GB/index.html.
Setting thest ationary heater/stationary ven‐
tilation via the multimedia sy stem
Multimedia sy stem:
4 Vehicle 5
b Climate control
5 Auxiliary heating
Yo u can pre-set thre e departure times for auto‐
matic activation of thest ationary heater. #
Select an option. Setting
thest ationary heater/stationary ven‐
tilation via remo tecont rol
Re quirements:
R The fuel tank is filled toat least reser vefuel
le ve l.
Switching on immedia tely #
Press and hold theu button. Setting
the departu retime #
Brie fly press theu button. #
Press the, or. button repeatedly
until the time tobe changed appears on the
displa y. #
Press theu and^ buttons simultane‐
ousl y.
The Îsymbol on there mo tecontrol displ ay
fl ashes. #
Press the, and. buttons toset the
desired departure time. #
Press theu and^ buttons simultane‐
ousl y.
The new departure time will be stored.
Up tothre e departure times can be stored. #
Toactivate the departu retime: select the
desired departure time and press and hold
th eu button.
The Ísymbol, the departure time and,
depending on the selected departure time,
th e letter A, BorCappear on the displa y. Climate cont
rol137

#
Alw ays disengage the dif fere ntial lo cks
immediately on a firm , high-t raction
su rface. Dif
fere ntial lo cks impr ovethe traction of the
ve hicle when driving off-road and ford ing. The
vehicle has thre e dif fere ntial lo cks:
R the dif fere ntial lo ckforth e transfer case 1
disables thero tational speed compensation
between the front and rear axles.
R the dif fere ntial lo ckforth ere ar axle 2disa‐
bles thero tational speed compensation
between the wheels of there ar axle.
R the dif fere ntial lo ckforth e front axle 3dis‐
ables thero tational speed compensation
between the wheels of the front axle.
Sy stem limits
If th e dif fere ntial lo cks are engaged, thefo llow‐
ing driving and driving saf ety sy stems are deacti‐
va ted:
R ABS( /page 178)
R Active Dis tance Assi stDISTRONIC
(/ page 190)
R Active Brake Assi st
R Active Parking Assist(/ page 207)
R Active Lane Keeping Assist(/ page219)
R BAS(/ page179)
R Hill Start Assist(/ page194) R
ECO start/ stop function (/ page148)
R ESP ®
(/ page 179)
R HOLD fu nction (/ page 195)
R limi ter (/ page187)
R cruise control (/ page 186)
R Blind Spot Assi st(/ page 217) Swi
tching dif fere ntial lock off/on Applies dif
fere ntial lock
Re quirements:
R You are not driving on a pa ved or public road.
R you are driving at walking pace.
R the driven wheels are not spinning. #
You can en gage the dif fere ntial lo cks in the
fo llowing order: 1,2, 3. Then press the
re spective buttons. Only engage the dif fere n‐
tial lo ck2 and 3forth e front and rear
axle if requ ired.
If all conditions ha vebeen fulfilled, the activation
indicator lamps 5light up. As soon as the dif‐ Driving and parking
161

fe
re ntial lo cks are active, the function indicator
lamps 4light up.
The message Differential lock active ABS and
ESP not available andthewa rning and indicator
lamps å÷!on the instrument clus‐
te r appear.
% If one or more requ irements ha venot been
ful filled, the message Switch-on conditions
Differential lock not fulfilled appears.
The gear change must be restar ted.
Disengaging the dif fere ntial loc ks #
Press the buttons in thefo llowing order 3,
2, 1.
or #
Tosimultaneously disengage all dif fere ntial
lo ck s: press button 1.
or #
Todisengage the dif fere ntial lo cksfo rthe
re ar and front axles: press button 2.
The dif fere ntial lo cks are only disengaged when
th e function indicator lamps are gone out again
4. If
yo u park theve hicle with the dif fere ntial lo cks
engaged, they will be deactivated automatically
when theve hicle is star ted again. In some cases,
yo u ha vetodrive a few metres before the dif fer‐
ential loc ksare proper ly disengaged. Therefore,
ch eck if the function indicator lamps ha vegone
out when youre start theve hicle 4.
Obser veany information which may be displa yed
in the instrument clus ter:
R Warning and indicator lamps
R Display messages Fu
nction of the 4MATIC
4MATIC ensures that all four wheels are driven
when needed. Toge ther with ESP ®
and 4ETS,
4MATIC impr ovesth e traction of your vehicle
whene ver a driven wheel spins due toinsuf fi‐
cient traction.
If yo ufa ilto adapt your driving style, 4MATIC can
neither reduce therisk of an accident nor over‐
ri de the la wsof ph ysics. 4MATIC cannot take
account of road, weather and traf fic conditions.
4MATIC is only an aid. You are responsible espe‐ cially
for maintaining a safe dis tance from the
ve hicle in front, forve hicle speed, for braking in
good time and forst ay ing in lane.
% In wint ryroad conditions, the maximum
ef fect of 4MATIC can be achie ved only if you
use winter tyres (M+S tyres), with sn ow
ch ains if necessar y. Re
fuelling Re
fuelling theve hicle &
WARNING Risk offire or explosion from
fuel
Fu els are highly flammable. #
Fire, naked flames, smoking and crea‐
tion of spar ksmust be avoided. #
Swit choff the ignition and, if available,
th est ationary heater, before and while
re fuelling theve hicle. 16 2
Driving and pa rking

Garage door opener
Prog
ramming buttons for the garage door
opener &
DANG ER Risk of fata l injuries due to
ex haust gases
Combustion engines emit poisonous exhaust
ga ses such as carbon monoxide. Inhaling
th ese exhaust gases is hazardous tohealth
and can lead topoisoning. #
Never lea vethe engine running in an
enclosed space wi thout suf ficient venti‐
lation. &
WARNING Risk of inju rywhen opening
or closing a door with thega rage door
opener
When you operate or program the door with
th e integrated garage door opener, people in
th era nge of mo vement of the door may
become trapped or stru ck bythe door. #
When using the integrated garage door
opener, alw ays make sure that nobody is within
thera nge of mo vement of the
door. Re
quirements:
R The vehicle has been par ked outside the
ga rage or outside thera nge of mo vement of
th e door.
R The engine is switched off.
R the ignition is switched on.
% The garage door opener function is alw ays
av ailable when the ignition is switched on. #
Press and hold button 1,2or3 that you
wish toprog ram.
Indicator lamp 4flashes yello w.
% It can take up to20 seconds before the indi‐
cator lamp flashes yello w. #
Release the pr eviously pressed button.
Indicator lamp 4continues toflash yello w. 17 0
Driving and pa rking

#
Point remo tecontrol 5from a di stance of
1 cm to8 cm towa rds buttons 1,2or3. #
Press and hold button 6ofremo tecontrol
5 until one of thefo llowing signals appears:
R Indicator lamp 4lights up green contin‐
uousl y.Programming is comple te.
R Indicator lamp 4flashes green. Pro‐
gramming was successful. Additionall y,
synchronisation of thero lling code with
th e door sy stem must also be car ried out. #
If indicator lamp 4does not light up or flash
green: repeat the procedure. #
Release all of the buttons.
% The remo tecontrol forth e door drive is not
included in the scope of delivery of the
ga rage door opener.
Synchronising thero lling code
Re quirements:
R The door sy stem uses a rolling code.
R The vehicle must be within range of the
ga rage door or door drive. R
The vehicle as well as persons and objects,
are located outside thera nge of mo vement
of the door. #
Press the programming button on the door
drive unit.
Initiate the next step within appr oximately
30 seconds. #
Press pr eviously prog rammed button 1,2
or 3 repeatedly until the door closes.
When the door closes, programming is com‐
ple ted.
% Please also read the operating instructions
fo rth e door drive.
Tr oubleshooting when prog ramming the
re mo tecont rol #
Check if the transmit ter frequency of remo te
control 5is suppo rted. #
Replace the batteries in remo tecontrol 5. #
Hold remo tecontrol 5atvarious angles at
a dis tance between 1 cm to8 cm in front of Driving and parking
171

th
e inside rearview mir ror.Yo u should test
eve ryposition for at least 25 seconds before
trying ano ther position. #
Hold remo tecontrol 5atthe same angles
at various dis tances in front of the inside rear
view mir ror.Yo u should test eve ryposition
fo r at least 25 seconds before trying ano ther
position. #
Notethat some remo tecontrols transmit
only for a limi ted period, press button 6on
re mo tecontrol 5again before transmission
ends. #
Align the aerial line of the door opener unit
with there mo tecontrol.
% Support and additional information on pro‐
gramming:
R Onthe HomeLink ®
Hotline on (0) 08000
466 354 65 or +49 (0) 6838 907-2 77.
R Onthe Internet at http://
www.homelin k.com. Opening/closing a
garage door
Requ irements:
R The cor responding button is programmed to
operate the door. #
Press and hold buttons 1,2or3 until
th e door opens or closes. #
If indicator lamp 4flashes yellow af ter
appr oximately 20 seconds: press and hold th
e pr eviously pressed button again until the
door opens or closes.
Clearing thega rage door opener memo ry #
Press and hold buttons 1and 3.
Indicator lamp 4lights up yello w. #
If indicator lamp 4flashes green: release
buttons 1and 3.
The entire memo ryhas been dele ted. 17 2
Driving and pa rking

R
Late #
Select a setting.
% Your selection is retained when theve hicle is
next star ted.
Deactivating Active Brake Assi st
% It is recommended that you alw ays lea ve
Ac tive Brake Assi stactivated. #
Select Off.
The dis tance warning function and the auton‐
omous braking function are deactivated.
When theve hicle is next star ted, theMedium
setting is automatically selected.
% IfAc tive Brake Assi stis deactivated, the
æ symbol appears inthest atus bar of the
multifunction displa y.Fu
nction of Adaptive Brake Lights Ad
aptive Brake Lights warnfollowing traf fic in an
emergency braking situation wi th thefo llowing
actions:
R Byflashing the brake lamps R
By activating the hazard warning lights
If th eve hicle is braked sharply from speeds
abo ve50 km/h, the brake lamps flash rapidl y.
This pr ovides traf fic tr avelling behind you with an
ev en more noticeable warning.
If th eve hicle is tr avelling at speeds of more than
70 km/h at the beginning of the brake applica‐
tion, the hazard warning lights switch on once
th eve hicle is stationar y.When you pull away
again, the hazard warning lights will switch off
automatically at appr oximately 10km/h. Yo u
can also switch off the hazard warning lights
using the hazard warning button. Cruise control and limiter
Fu
nction of cruise control
Cruise cont rolre gulates the speed totheva lue
selec tedby the driver.
If yo u accelerate toove rtake, forex ample, the
st ored speed is not dele ted. If youre mo veyour
fo ot from the accelera tor pedal af terov ertak ing,
cruise control will resume speed regulation back
to thestored speed. Cruise contro
l is operated using the cor respond‐
ing steering wheel buttons. You can store any
speed abo ve20 km/h up tothe maximum speed
or up tothe set winter tyre limit.
If yo ufa ilto adapt your driving style, cruise con‐
trol can neither reduce therisk of an accident
nor override the la wsof ph ysics. It cannot take
into account road, weather or traf fic conditions.
Cruise control is only an aid. You are responsible
fo r maintaining a safe dis tance totheve hicle in
front, forve hicle speed, for braking in good time
and forst ay ing in lane.
Displa yson the multifunction display
The status of cruise control and thestored
speed are shown in the multifunction displa y.18 6
Driving and pa rking