Page 400 of 506

#Allow the engine tocool down before
adding antifreeze.
#Make surethat no antifreeze spills out
next tothefiller opening.
#Thoroughly clean off any antifreeze
from component parts before starting
th eve hicle.
* NO
TEDama gecaused byincor rect cool‐
ant
#Only add coolant that has been pre‐
mixed with therequ ired antifreeze pro‐
te ction.
Fu rther information on coolant:
RIn the Mercedes-Benz Specifications for
Operating Fluids 310.1, e.g. online at
http://be vo.mercedes-benz.com.
RAt aqu alified specialist workshop.
* NO
TEOverheating at high outside tem‐
peratures
If an inappro priate coolant is used, the
engine cooling sy stem is not suf ficiently pro‐
te cted against overheating and cor rosion at
high outside temp eratures.
#Alw ays use coolant appr ovedby
Mercedes-Benz.
#Obser vethe instructions in the
Mercedes-Benz Specifications for Oper‐
ating Fluids 310.1.
Ha ve the coolant regularly changed at a qualified
specialist workshop.
The proportion of cor rosion inhibitor/antifreeze
concentrate in the engine cooling sy stem should
be:
RA minimum of 50% (antifreeze pr otection
down toappr oximately -35 °F (-37 °C)).
RA maximum of 55% (antifreeze pr otection
down to-49 °F (-45 °C)). Coolant
filling capacity
Capacity
Model Capacity
All models 12.7 US qt (12.0 l)
Note s on windshield washer fluid
Obser vethe no tes on operating fluids
(→page 394).
& WARNING ‑ Risk of fire and injury from
windshield washer concentrate
Wi ndshield washer concentrate is highly
fl ammable. It could ignite if it comes into
con tact wi thhot engine component parts or
th eex haust sy stem.
#Make sure that no windshield washer
concentrate spills out next tothefiller
opening.
398 Tech nical da ta
Page 402 of 506
Warning symbols 1advise you about:
Rpossible dangers
Rhaving service workcar ried out at a qualified
specialist workshop
Re frigerant filling capacity
Fi lling capacity forre frigerant and PAG oil
Model Refrigerant
All models2 2.2 ± 0.4 oz
(630 ± 10g)
Model PAG oil
All models2 .8 ± 0.4 oz
(80 ± 10g)
Vehicle data
Vehicle dimensions
The heights specifi ed mayvary as a result of the:
RTire s
RLoad
RCondition of the suspension
ROptional equipment
Height when opened
Model
1Opening
height 2Head‐
ro om
All models 81.8 in
(20 77mm) 76
.8 in
(1951 mm)
Ve hicle dimensions
All models
Vehicle lengt h1 94.2 in
(4933 mm)
Ve hicle width including out‐
side mir rors 81
.3 in
(2065 mm)
Ve hicle height 58.4 in
(1483 mm)
Wheelbase 115.7 in
(2939 mm)
Tu rning radius 39.0ft
(1 1. 90 m)
We ights and loads
Please no tethat forth e specified vehicle data:
RItems of optional equipment increase the
curb weight and reduce the maximum pay‐
load.
400 Tech nical da ta
Page 404 of 506

Displaymessages
Int roduction
Note s on display messages
Display messages appear in the multifunction
displa y.
Displ aymessage s with graphic symbols are sim‐
plified in the Operator's Manual and may dif fer
from the symbols in the multifunction displa y.
The multifunction display sho wshigh-priority dis‐
play messages in red. Cer tain display messages
are accompanied byawa rning tone.
Please respond in accordance with the display
messages and follow the additional no tes in this
Opera tor's Manual.
Fo r some display message s, a symbol is also
shown:
R¤ Further information
RO Hide display message
Yo u can select the desired symbol byswiping
left or right on the left-hand side of Touch Con‐
trol. Press the¤ symbol toshow fur ther
information. Press theO symbol tohide the
display message.
Yo u can hidelow- priority display messages by
pressing the% button or the left-hand side of
To uch Control. The display messages arethen
st ored in the message memor y.
Re ctify the cause of a display message as
qu ickly as possible.
High-priority display messages cannot be hid‐
den. The multifunction display sho ws these dis‐
play messages continuously until the cause for
th e message has been rectified. Calling up
stored displ aymessages
On-boa rdcompute r:
, 6 H U Y L F H. 0 H V V D J H
If th ere are no display messages, 1 R 0 H V V D J H V
appears in the multifunction displa y.
#Scrollthro ugh the display messages byswip‐
ing upwards or down wards on Touch Control
on the left-hand side of thesteering wheel.
#To exitth e message memor y:press the
% button.
402
Display messages and warning/indicator lamps
Page 405 of 506