2018 MERCEDES-BENZ E-CLASS WAGON fold seats

#Left andright and seat backrests: press
ri ght or left button 1.
The cor responding seat backrest folds
fo rw ard.#Center seat backres t:pull seat backrest 2
re lease 3forw ard.
#Fold seat backrest 2forw ard.
Seats and stowing 10
5

Folding there ar seat backrest back
* NO
TEDama getothe seat belt
The seat belt could become trapped and thus
damaged when folding back the seat back‐
re st.
#Make sure that the seat belt is not trap‐
ped when folding back the seat back‐
re st.
If th e seat backrest is not engaged and loc ked,
th is will be shown in the multifunction display in
th e instrument clus ter.
#Mo vethe driver's or front passenger seat for‐
wa rds, if necessar y.
#Fold cor responding seat backrest 1back
until it engages.
Left and right seat backrests: ifth e seat
backrest is not cor rectly engaged, this will be
shown in the multifunction display in the
instrument clus ter.
Center seat backres t:ifth e seat backrest is
not cor rectly engaged, red lock verification
indicator 2will be visible. Lo
cking the center rear seat backrest
Lock the center seat backrest if youwa ntto
secure the cargo compartment from unauthor‐
ized access. The center seat backrest can then
only be folded forw ard toget her with the left seat
backrest.
Bo th seat backrests must be engaged and joined
to ge ther.
10 6
Seats and stowing

#Foldthe center and left seat backrest
fo rw ard.
#To lock: slide catch 1up.
The release mechanism of the center seat
backrest is loc ked.
#To unlock :slide catch 1down.
Ad justing the angle of the rear seat backr‐
ests (cargo position)
To enlar gethe cargo compartment, you can
adjust the seat backrests so that they are 10
degrees steeper (cargo position).
#Fo ldthe seat backrest forw ard (→page 104).
#Mo vebar 1inthe direction of the ar row.
#Push seat backrest 2back tobar 1until
th e backrest engages.
Load compartment co ver with saf ety net
(combined cargo co ver and net)
Note s onthe cargo compa rtment co ver
&
WARNING Risk of injury or death dueto
objects being poorly secured
On its own,the cargo compartment co ver
cannot secure orrestra in heavy objects,
items of luggage and heavy loads.
Yo u could be hit byan unsecured load during
sudden changes in direction, braking or in
th eev ent of an accident.
#Alw aysstow objects in such a wayth at
th ey cannot be thro wn around.
#Secure objects, luggage or loads
against slipping or tipping over,e.g. by
using tie-do wns,eve n if you are using
th e cargo compartment co ver.
Seats and stowing 10
7

*NO
TEDama getothe cargo compart‐
ment co ver when loading theve hicle
The cargo compartment co ver may be dam‐
aged when loading theve hicle.
#Do not place any objects abo vethe
lo we r edge of the side windo wsor on
th e cargo compartment co ver.
The cargo compartment co ver and the saf etyne t
fo rm the combined cargo co ver and net.
When the cargo compartment co ver is clipped
in, there should be no objects in the cargo com‐
partment obstructing the down wards mo vement
of the co ver when theta ilgate is being closed.
The cargo compartment co ver will otherwise be
ra ised again automaticall y. Extending/r
etra cting the cargo compa rt‐
ment co ver
#To extend: pull cargo compartment co ver1
back bygrab handle 2and clip it into the
brac kets on the left and right.
The cargo compartment co verra ises automati‐
cally when theta ilgate is opened and lo wers
again when theta ilgate is closed.
#To retract: unhook cargo compa rtment
co ver1 from the brac kets on the left and
ri ght and guide it forw ards bygrab handle 2
until it is fully retracted. The contour plate of
there tracted cargo com‐
pa rtment co ver can be used in thre e positions:
Rfolded up by45° (loading position)
Rhorizontal position (driving position)
Rfolded down and loc ked in place (rattle-free
position when driving)
Installing/removing the combined luggage
co ver and net
Requ irements
RRemo vefrom the cargo compartment or
from the left-hand rear door if the seat backr‐
ests are folded forw ards.
RThe cargo compartment co ver and saf etyne t
ar ere tracted.
10 8
Seats and stowing

#Toremo ve:press button 2.
#Foldthe combined luggage co ver and net
backwards with the seat backrest folded up.
#Fir st, de tach th e combined luggage co ver
and net from left-hand cat ch1 and then
re mo veit from right-hand brac ket4.
#To install: slidethe combined luggage co ver
and net into right-hand brac ket4 uptothe
st op.
#Place the combined luggage co ver and net
into the left-hand brac ket and slide it into
catch 1until the combined luggage co ver
and net engages audibl y.
Re d lock verification indicator 3must no
longer be visible.
At tachin gth e combined luggage co ver and
net tothere ar seat backrest
* NO
TEDama getothe combined luggage
co ver and net when attaching it tothe
seat backrest
When the combined luggage co ver and net is
attached tothe seat backrest, it may be
damaged when the seat backrest is folded
bac k.
#Do not fold the seat backrests bac k.
Requirement:RThe seat backrests are folded forw ards.
#Insert combined luggage co ver and net 2
into bo thguides 1and push it up tothe
st op in the direction of the ar row.
To disassemble the combined luggage co ver and
net, follow the instructions in reve rse order.
Seats and stowing 10
9

poses. The components are located underthe
cargo compart mentfloor.
1Bag containing the brac kets and luggage
holder
2Te lescopic rod Inserting
the brac kets in tothe load rail
#Insert brac ket1 into the center of load rail
5.
#Press release knob 3and slide brac ket1
into the desired position in load rail5.
#Let go of release knob 3.
#Press locking button 4.
Brac ket1 is lo cked in load rail5.
#If necessar y,fold tie-down eye2 upwards.
Te nsioning the luggage holder
Re quirements:
RThe luggage holder is used tosecure loads
against the side wall of the cargo compart‐
ment topreve ntthem from moving around.
ROnly secure loads with a maximum weight of
15 .4 lbs (7 kg) and which are small enough
fo rth e luggage holder totightly and properly
secure them.
11 2
Seats and stowing

#Make surethat locking button 4on brack‐
et s2 is pressed.
Brac kets 2 are secured in place on the load
ra il.
#To remo ve:press release knob 3on
re spective brac ket2 and remo ve te lescopic
ro d1 bypulling it up and out.
Opening thesto wage space under the cargo
compa rtment floor
&
WARNING Risk of injury duetoan open
cargo compartment floor
If yo udriv e when the cargo compartment
fl oor is open, objects could be throw n around
and thereby strike vehicle occupants. There
is a risk of injur y,particular lyin theeve nt of
sudden braking or a sudden change in direc‐
tion.
#Alw ays close the cargo compartment
fl oor before a journe y.
#Toopen: holding theribbing, press handle
1 down.
#Lift the cargo compartment floor up byhan‐
dle 1.
#Fold out the hook on thest ra p on the under‐
side of the cargo compartment floor and
hook it into thera in trough.
#To close: unhook the hook from thera in
trough and fasten it tothe brac ket on the
under sideofthe cargo compartment floor.
#Fo ldthe cargo compartment floor down and
th en press handle 1down until it engages.
Attachin gth ero of rack
&
WARNING Risk of injury by exceeding
th e maximum roof load
When you load thero of, theve hicle center of
gr av ity rises and the driving characteristics
ch ange.
If yo uexc eed the maximum roof load, the
driving characteristics, as well as thesteer‐
ing and braking, will be greatly impaired.
#Ne verexc eed the maximum roof load
and adjust your driving style.
Yo uwill find information on the maximum roof
load in the "Technical data" section.
11 4
Seats and stowing

Openingthe cup holder in there ar armrest
* NO
TEDama getothe cup holder
When there ar armrest is folded back the cup
holder could become damaged.
#Only fold there ar armrest back when
th e cup holder is closed.
#To open: press on cup holder 1or2.
#To fold in or out: place orremo vea con‐
ta iner from cup holder 1or2.
Ashtra y and cigar ette lighter
Using the ashtr ayinthe front center console
* NO
TEDama getothestow age compart‐
ment under the ashtr ay
Thestow age compartment under the ashtray
is not heat resis tant and could be damage d if
yo ure st a lit cigar ette on it.
#Make sure that the ashtr ayis fully
engaged.
#To open: pushthe co ver of the ashtr ay
upwards on its right 2or left side.
#Toremo vethe inser t:press insert 1
upwards slightly and pull it out upwards.
#To install the inser t:press insert 1into
th e holder until the insert engages.
11 6
Seats and stowing