Page 452 of 593

R
The vehicle is not on a slope.
R The vehicle is on solid, non-slippery and le vel
ground. 0007
Apply the electric parking brake manually. 0007
Movethe front wheels tothest ra ight-ahead
position. 0007
Vehicles with manual transmission:
engage firs t or reve rsege ar. 0007
Vehicles with automatic transmission:
shift into position 005D. 0007
Vehicles with le vel control sy stem: setthe
normal vehicle le vel (0013 page 220). 0007
Swit choff the engine. 0007
Make sure that the engine cann otbe star ted. 0007
Place choc ks orother suitable items under
th e front and rear of the wheel that is diago‐
nally opposite the wheel you wish tochange. 0007
Remo vethe hub caps if necessary
(0013 page449). 0007
Raise theve hicle (0013 page 450). Re
moving and fitting hub caps Re
quirements:
R The vehicle is prepared for a wheel change
(0013 page448).
Plas tic hub cap 0007
Toremo ve:turn the cent recover of the hub
cap anti-clockwise and remo vethe hub cap. 0007
Tofit: make sure that the cent recover of the
hub cap is turned anti-clockwise. 0007
Position the hub cap and turn the cent re
co ver clockwise until the hub cap engages
ph ysically and audibly. Aluminium hub cap 0007
Toremo ve:position soc ket2 on hub cap
1.
0009 The soc ket can be found in the tyre-change
to ol kit. 0007
Position wheel spanner 3on soc ket2. 0007
Using wheel spanner 3, turn hub cap1
anti-clo ckwise and remo veit. 0007
Tofit: position hub cap 1and turn until it is
comple tely flush with the wheel. 0007
Position soc ket2 on hub cap 1. Wheels and tyres
449
Page 453 of 593

0007
Attach wheel spanner 3tosoc ket2 and
tighten the hub cap clockwise.
Specified tightening torq ue: 25 Nm. Ra
ising theve hicle when changing a wheel Re
quirements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (0013 page448).
R The hub caps ha vebeen remo ved
( 0013 page449).
Impor tant no tes on using the jack:
R Use only theve hicle-specific jack that has
been tested and appr ovedby Mercedes-Benz
to raise theve hicle.
R The jack is only designed forra ising and
holding theve hicle for a short time while a
wheel is being changed and not for mainte‐
nance workunder theve hicle.
R The jack must be placed on a firm ,fl at and
non-slip sur face. If necessar y,use a lar ge,
fl at, load-bearing, non-slip unde rlay. R
The foot ofthe jack must be positioned verti‐
cally under the jack support point. Ru
les of conduct when theve hicle is raised:
R Never place your hands or feet under the
ve hicle.
R Never lie under theve hicle.
R Do not start the engine and do not release
th e electric parking brake.
R Do not open or close any doors or the boot
lid. 0007
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe bolts
comple tely. 450
Wheels and tyres
Page 479 of 593

Display messages
Possible causes/consequences and 0050
0050Solutions
0024 Turn on the ignition to
release the parking brake *
The red0024 indicator lamp is lit.
Yo u ha veattem ptedto release the electric parking brake with the ignition switched off. 0007
Switch the ignition on.
0024 Parking brake See Owner's
Manual *
The yellow 0024 indicator lamp is lit. The elect ric pa rking brake is malfunctioning.
To appl y: 0007
Switch off the ignition and switch it back on. 0007
Apply the electric parking brake manually (0013 page186).
If it is not possible toapply the electric parking brake: 0007
Consult a qualified specialist workshop. 0007
Where necessar y,also safeguard the par kedve hicle against rolling away.
The yellow 0024 indicator lamp and there d0024 indicator lamp are lit. The elect ric pa rking brake is malfunction‐
ing.
To release: 0007
Swit choff the ignition and switch it back on. 0007
Release the electric parking brake manually (0013 page186).
or 0007
Release the electric parking brake automatically (0013 page185). 476
Displaymessa ges and warning/indicator lamps
Page 480 of 593

Display messages
Possible causes/consequences and 0050
0050Solutions
If it is still not possible torelease the electric parking brake: 0007
Do not continue driving under any circums tances. Consult a qualified specialist workshop.
The yellow 0024 indicator lamp is lit and there d0024 indicator lamp is flashing. The electric parking brake is mal‐
functioning.
The electric parking brake could not be applied or released. 0007
Swit choff the ignition and switch it back on.
To appl y: 0007
Release and then apply the electric parking brake manually (0013 page186).
To release: 0007
Apply and then release the electric parking brake manuall y.
If it is not possible toapply the electric parking brake or there d0024 indicator lamp continues toflash: 0007
Do not continue driving under any circum stances. Consult a qualified specialist workshop. 0007
Where necessar y,also safeguard the par kedve hicle against rolling away.
The yellow 0024 indicator lamp is lit and there d0024 indicator lamp flashes for appro ximately ten seconds af ter
th e electric parking brake has been applied or released. It then remains lit or goes out. The electric parking brake is
malfunctioning.
If th e bat tery charge leve l is too lo w: 0007
Char gethe batter y. Displ
aymessa ges and warning/indicator lamps 477
Page 481 of 593

Display messages
Possible causes/consequences and 0050
0050Solutions
To appl y: 0007
Switch off the ignition.
The electric parking brake is applied automaticall y.
If th e electric parking brake should not be applied, e.g. when washing theve hicle in an automatic car wash or when
having theve hicle towe d, lea vethe ignition switched on. This does not include having theve hicle towe d with the
re ar axle raised.
If th e electric parking brake is not applied automatically: 0007
Switch off the ignition and switch it back on. 0007
Release and then apply the electric parking brake manually (0013 page186).
If it is still not possible toapply the electric parking brake: 0007
Consult a qualified specialist workshop. 0007
Where necessar y,also safeguard the par kedve hicle against rolling away.
To release: 0007
Ifth e conditions for auto matic release are fulfilled and the electric parking brake is not released automaticall y,
re lease the electric parking brake manually (0013 page186).
If it is still not possible torelease the electric parking brake: 0007
Do not continue driving under any circums tances. Consult a qualified specialist workshop. 478
Displaymessa ges and warning/indicator lamps
Page 482 of 593

Display messages
Possible causes/consequences and 0050
0050Solutions
0024 Release parking brake *
The red0024 indicator lamp flashes.
The electric parking brake is applied while you are driving:
R A condition for auto matic release of the electric parking brake is not fulfilled (0013 page185).
R You are per form ing emer gency braking using the electric parking brake (0013 page187). 0007
Che ckthat the conditions for auto matic release of the electric parking brake are fulfilled. 0007
Release the electric parking brake manually.
007A
0025
00E5
inoperative See Owner's
Manual *
EBD, ABS and ESP ®
are malfunctioning.
Other driving sy stems and driving saf ety sy stems may also be malfunctioning. 000A
WARNING Risk of skidding if EBD, ABS and ESP ®
are malfunctioning
If EBD, ABS and ESP ®
are malfunctioning, the wheels can lock when braking and ESP ®
cann otcar ryout vehicle
st abilisation.
The steering capability and braking characteristics are thus se verely impaired. The br aking distance may
increase in an eme rgency braking situation. In addition, other driving saf ety sy stems are switched off. 0007
Drive on carefull y. 0007
Have the brake sy stem checked immediately at a qualified specialist workshop. 0007
Drive on carefully. 0007
Consult a qualified specialist workshop immediatel y. Displ
aymessa ges and warning/indicator lamps 47 9
Page 513 of 593

Display messages
Possible causes/consequences and 0050
0050Solutions 0007
Untilthen, manually set the transmission toposition 005Dbefore you swit choff the engine. 0007
Before leaving theve hicle, apply the electric parking brake.
Clutch overheated Avoid
pulling away for XX:XX mins *T
he clutch is under considerable load and is overheating.
Av oid frequent pulling away and driving at walking pace over longer dis tances. 0007
Stop theve hicle, paying attention toroad and traf fic conditions, and le avethe engine running.
The clutch will cool more quickly when the engine is running.
or 0007
If possible, continue driving at a steady speed and remo veyour foot from the clutch pedal. Do not ride the
clutch.
The clutch will cool while theve hicle is in motion.
When the clutch has cooled down, the display message will disappear.
Depress clutch fully to
start engine *Y
ou ha veattem ptedto start the engine without depressing the clutch pedal. 0007
Depress the clutch pedal and then start the engine.
The engine has stalled while theve hicle was pulling away, e.g. because the clutch pedal wasre leased tooqu ickl y. 0007
Dep ress the clutch pedal again.
The engine will start automaticall y. 0007
Slowly release the clutch pedal topull away.
N permanently active Risk
of vehicle rolling *
While theve hicle is rolling or while you are driving, the transmission has been shif tedto position 005C. 0007
Depress the brake pedal tostop and, when theve hicle is stationar y,shift the transmission toposition 005D. 51 0
Displaymessa ges and warning/indicator lamps
Page 533 of 593

Instrument display (standard)
Instrument display in
the widescreen cockpit Wa
rning and indicator lamps:
0058 Low beam (0013
page126)
0060 St
anding lights (0013 page126)
0057 High beam (0013
page128)
003E003D Tu
rn signal indicator
(0013 page128)
005E Re
ar fog light (0013 page126)
0075 Re
stra int sy stem (0013 page 531)
00E9 Seat belt not
fastened
(0013 page 536)
004D Brakes (yellow) (0013
page 531)
004D Brakes (red) (0013
page 531)
0024 Elect
ric pa rking brake (yellow)
(0013 page 531)
0024 Electric parking brake (red)
(0013
page 531)
0025 ABS malfunction (0013
page 531)
00E5 ESP®
(0013 page 531)
00BB ESP®
OFF (0013 page 531) L
Distance warning (0013 page 537)
00CC Po
we r-assis tedsteering malfunction
(0013 page542)
00CC AIRMATIC malfunction
(0013 page 537)
00CC DY
NA MIC BODY CONTROL malfunc‐
tion (0013 page 537)
00B9 Engine diagnostics (0013
page 538)
0028 Preglow
003D Electrical
fault( 0013 page 538)
00B6 Fu
elreser vewith fuel filler flap loca‐
tion indicator (0013 page 538)
00AC Coolant
too hot/cold
(0013 page 538)
0077 Ty
re pressure monitor
(0013 page540)
00CA Tr
ailer hit chis not operational or is
swivelling(0013 page542) 530
Displaymessa ges and warning/indicator lamps