2018 MERCEDES-BENZ C-CLASS COUPE light

ISOFIX or i‑Size
child restra int sy stems and
th ech ild may not be restra ined cor rectly in
th eev ent of an accident, forex ample. 0007
Ifth ech ild and thech ild restra int sys‐
te m toget her weigh more than 33 kg,
only use an ISOFIX or i‑Size child
re stra int sy stem with which thech ild is
secured with theve hicle seat belt. 0007
Also secure thech ild restra int sy stem
with theTo pTe ther belt, if available. Alw
ays comply with the information about the
mass of thech ild restra int sy stem:
R inthe manufacturer's ins tallation and operat‐
ing instructions forth ech ild restra int sy stem
used
R on a label on thech ild restra int sy stem, if
present
Re gular lych eck that the permissible gross mass
of thech ild and child restra int sy stem is still
complied with. When
fitting a child restra int sy stem, obser ve
th efo llowing:
0073 Alw
ays obser vethe cor rect use and the suit‐
ability of the seats for attaching a child
re stra int sy stem.
ISOFIX child seat securing sy stem
(0013 page57)
i‑Size child seat securing sy stem
(0013 page 59)
0073 Alw
ays comply with the manufacturer's
ins tallation and operating instructions for
th ech ild restra int sy stem used.
0073 Make sure
that thech ild's feet do not touch
th e front seat. If necessar y,mo vethe front
seat forw ard slightl y. When
fitting an ISOFIX child restra int sys‐
te m, obser vethefo llowing:
0073 When using a Group 0/0+ baby car seat
or a Group I rear wa rd-facing child
re stra int sy stem on a rear seat: adjust th
e front seat so that the seat does not
to uch thech ild restra int sy stem.
0073 When using a Group I
forw ard-facing
ch ild restra int sy stem: remo vethe head
re stra int from there spective seat, if possi‐
ble. In addition, the seat backrest of the
ch ild restra int sy stem must, as far as possi‐
ble, lie flat against the backrest of theve hi‐
cle seat.
When youre mo vethech ild restra int sys‐
te m, ins tallth e head restra int again immedi‐
ately and adjust all the head restra ints cor‐
re ctly.
0073 Fo
r cer tain child restra int sy stems in weight
group 2 or 3, there may be restrictions in
th e maximum size setting, e.g. due topossi‐
ble con tact wi th thero of.
0073 The
child restra int sy stem must not be put
under stra in between thero of and the seat
cushion and/or be fitted facing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly. Occupant saf
ety61

Obser
vethe no tes under "Suitability of
seats for attaching belt-secu redch ild
re stra int sy stems" (0013 page64).
0073 When using a category 0/0+ baby car
seat and a category I
rear wa rd-facing
ch ild restra int sy stem on a rear seat:
adju stthe front seat so that the seat does
not touch thech ild restra int sy stem.
0073 When using a category I
forw ard-facing
ch ild restra int sy stem: remo vethe head
re stra int from there spective seat, if possi‐
ble.
Af terre moving thech ild restra int sy stem,
re place the head restra ints again immedi‐
ately and adjust them cor rectl y.
0073 The backrest of
thefo rw ard-facing child
re stra int sy stem must, as far as possible, be
re sting on the seat backrest of there ar
seat.
0073 Fo
r cer tain child restra int sy stems in weight
category II or III, there may be restrictions in
th e maximum size setting, e.g. due topossi‐
ble con tact wi th thero of. 0073
The
child restra int sy stem must not be put
under stra in between thero of and the seat
cushion and/or be fitted facing the wrong
direction. Where possible, adjust the seat
cushion inclination according ly.
0073 The
child restra int sy stem must not be put
under stra in by the head restra ints. Adjust
th e head restra ints accordingly.
0073 Make sure
that thech ild's feet do not touch
th e front seat. If necessar y,mo vethe front
seat forw ard slightl y. 0007
Fitthech ild restra int sy stem.
The entire base of thech ild restra int sy stem
must alw aysre st on the sitting sur face of the
re ar seat. 0007
Alw ays make sure that the shoulder belt
st ra p is cor rectly routed from the seat belt
outlet of theve hicle tothe shoulder belt
guide on thech ild restra int sy stem.
The shoulder belt stra p must be routed for‐
wa rds and down wards from the seat belt out‐
let. Note
s onvehicles without automatic front
passen ger front airbag shu toff St
icke r visible when the front passenger door
is open
Ve hicles without automatic front passenger front
airbag shutoff ha vea special sticke r af fixe dto
th e side of the cockpit on the front passenger
side. Occupant saf
ety67

If
th eve hicle is not opened within appr oximately
40 seconds af ter unlocking, it loc ksagain. Anti-
th eft pr otection is primed again.
Do not keep theke yto ge ther with electronic
devices or me tal objects. This can af fect the
ke y's functionalit y.
0009 If battery check lamp 2does not light up
af te r pressing the0036 or0037 button, the
battery is dischar ged.
Re placing theke y bat tery ( 0013 page73). Ac
tivating/deactivating the acoustic lo cking
ve rification signal Multimedia sy
stem:
0018 Vehicle 0019
î Vehicle settings
0019 Acoustic lock 0007
Activate 0073or deacti vate 0053 the function. Ac
tivating/deactivating the panic alarm Re
quirements:
R The ignition is switched off 0009
The panic alarm function is only available in
cer tain countries. 0007
Toactivate: press button 1for appro x‐
ima tely one second.
A visual and audible alarm is triggered. 0007
Todeactivate: briefly press but ton1 again.
or 0007
Press thest art/ stop button on the cockpit
(the key is inside theve hicle). Changing
the unlocking settings Po
ssible unlocking functions of theke y:
R cent ral unlocking R
unlocking the driver's door and fuel filler flap 0007
Toswitch between settings: pressthe
0036 and0037 buttons simultaneously for
appr oximately six seconds until the battery
ch eck lamp flashes twice.
If th e unlocking function forth e driver's door
and fuel filler flap has been selec ted:
R pressing the0036 button a second time cen‐
trally unloc kstheve hicle
R Vehicles with KEYLESS-GO: ifyo uto uch
th e inner sur face of the door handle on the
driver's door, only the driver's door and fuel
fi ller flap are unlo cked. Deactivating
theke y functions If
yo u do not use theve hicle or a keyfo r an
ex tended pe riod of time, you can reduce the
energy consum ption of there spective key.Todo
so, deactivate theke y functions. 72
Opening and closing

0007
Todeactivate: pressthe0037 button on the
ke y twice in quick succession.
The battery check lamp of theke yflashes
twice brief lyand lights up once. 0007
Toactivate: press any button on thekey.
0009 When theve hicle is star ted with theke y in
th estow age compartment of the cent recon‐
sole, theke y functions are automatical ly
activated (0013 page155). Re
moving/inserting the eme rgency key 0007
Toremo ve:press release button 1.
Emer gency key2 is pushed out slight ly. 0007
Pull out emer gency key2 until it en gage s in
th e intermediate position.
0009 You can use the intermediate position of
emer gency key2 toattach theke yto akey
ri ng. 0007
Press release button 1again and fully
re mo veemer gency key2. 0007
Toinser t:press release button 1. 0007
Insert emer gency key2 tothe intermediate
position or fully until it engages. Re
placing the key battery 000A
DANG ER Serious damage tohealth
caused byswallowing batteries
Batteries contain toxic and cor rosive sub‐
st ances. Swallowing bat teries may cause
serious damage tohealth.
There is a risk of fata l injur y. 0007
Keep batteries out of there ach of chil‐
dren. 0007
If batteries are swallo wed, seek medical
attention immediately. 000F
ENVIRONMEN
TALNO TEEnvironmental
dama gedue toimproper disposal of bat‐
te ries Batteries conta
in pollutants. It is
illegal todispose of them with the household
ru bbish. 0007
Dispose of batteries in an
environmen tally responsible manner.
Ta ke dischar ged batteries toaqu alified
specialist workshop or toa collection
point for used batteries. Re
quirements:
R Yourequ ire a CR 2032 3 V cell batter y. Opening and closing
73

to
n on theke y (with theke y in the vicinity of
th eve hicle). 0007
Vehicles with boot lid conve nience clos‐
ing feature: press boot lid remo teoperating
switch 1. 0007
Vehicles with boot lid conve nience clos‐
ing feature: press closing button 1onthe
boot lid. 0007
Vehicles with boot lid conve nience clos‐
ing and KEYLESS-GO: press locking button
2 onthe boot lid.
If a key is de tected outside theve hicle, the
boot lid will close and theve hicle will be
loc ked. Boot lid automatic
reve rsing function
If an object obstructs the boot lid during the
automatic closing process, the boot lid will open
again automaticall y.The automatic reve rsing
function is only an aid and is not a substitute for
yo ur attentiveness. 0007
When closing, make sure that no body parts
are in the closing area. 000A
WARNING Risk of becoming trapped
despi tereve rsing function
The reve rse function does not react:
R tosoft, light and thin objects, e.g. fingers
R over the last 8 mm of the closing path.
In these situations in particular, there ve rsing
function cannot pr event someone being trap‐
ped. 0007
When closing, make sure that no body
parts are in the closing area.
If someone is trapped:
R press the008B button on theke y,or 82
Opening and closing

The buttons on
the driver's door take prece‐
dence. 0007
Tostart automatic operation: pressthe
0062 button be yond the point of resis tance
or pull and release it. 0007
Tointer rupt automatic operation: press or
pull the0062 button again.
When theve hicle is switched off, the side win‐
do ws can continue being ope rated.
The function is available for around five minutes
or until a door is opened.
Au tomatic reve rsing function of the side win‐
do ws
If an object bloc ksa side wind owduring the
closing process, the side window opens again
automaticall y.The automatic reve rsing function
is only an aid and is not a substitute foryo ur
attentiveness. 0007
When closing, make sure that no body parts
are in the closing area. 000A
WARNING Risk of becoming trapped
despi tethere being reve rsing pr otection
on the side window
The reve rse function does not react:
R tosoft, light and thin objects, e.g. fingers
R during resetting
This means that there ve rse function cann ot
pr eve nt someone from becoming trapped in
th ese situations. 0007
When closing, make sure that no body
parts are in the closing area. 0007
If someone becomes trapped, press the
0062 button toopen the side window
again. Au
tomatic function of the side windo ws The front side windo
wsare closed automatically
when theve hicle is switched off:
R if it starts torain (de tection bythera in sen‐
sor on the windscreen)
R intheeve nt of extreme outside temp eratures R
afte r six hours
R ifth ere is a malfunction in the po wer supp ly
The front side windo wsare closed as far as the
ve ntilation position.
Ve hicles with a sliding sunroof: the front side
windo wsare closed comple tely if the sliding sun‐
ro of is open.
If th e side windo wsare bloc ked during auto‐
matic closing, the side window concerned will
open again slightl y.The automatic function is
th en deactivated. Con
venience opening (ventilating theve hicle
before starting a journey) 000A
WARNING Risk of entrapment when
opening a side window
When opening a side windo w,parts of the
body could be dr awn in or become trapped
between the side window and window frame. 0007
When opening, make sure that nobody
is touching the side windo w. 86
Opening and closing

Problem
Possible causes/consequences and 0050
0050Solutions
000A WARNING Risk of becoming trapped or fata lly injured if reve rsing pr otection is not activated
If yo u close a side wind owagain immediately af ter it has been bloc ked or reset, the side window closes
with increased or maximum forc e. The reve rsing feature is then not active.
Pa rts of the body could become trapped in the closing area in the process. 0007
Make sure that no parts of the body are in the closing area. 0007
Tostop the closing process, release the button or press the button again toreopen the side win‐
do w. If a side window is obstructed during closing and
reopens again slightly: 0007
Immediately af terth e window is bloc ked, pull the cor responding switch again until the side window has
closed, and hold the switch for an additional second.
The side window will be closed with increased forc e.
If a side window is obstructed again during closing and reopens again slightly: 0007
Repeat the pr evious step.
The side window is closed without the automatic reve rsing function.
The side windo wscannot be opened or
closed using the con venience opening
fe ature. The
key bat tery iswe ak or dischar ged. 0007
Check the battery using the battery indicator lamp and replace if necessary (0013 page73). 88
Opening and closing

000A
WARNING Risk of entrapment even wi th
th ere ve rsing feature active
The reve rse function does not react in partic‐
ular:
R tosoft, light and thin objects, e.g. fingers
R overth e last 4 mm of the closing path
R during resetting
This means that there ve rse function cann ot
pr eve nt someone from becoming trapped in
th ese situations. 0007
When closing, make sure that no body
parts are in the closing area. 0007
Release the button immediately if
somebody becomes trapped.
or 0007
Brief lypress the button in any direction
during automatic operation.
The closing process is stopped. Au
tomatic reve rsing function of thero ller
sunblind
If th ere is an object obstructing thero ller sun‐
blind during the closing process, thero ller sun‐
blind will open again automaticall y.The auto‐
matic reve rsing function is only an aid and is not
a substitute foryo ur attentiveness. 0007
When closing thero ller sunblind, make sure
th at no body parts are in thera nge of mo ve‐
ment. 000A
WARNING Risk of becoming trapped
despi tereve rsing function
In particular, there ve rsing function does not
re act tosoft, light and thin objects, e.g. fin‐
ge rs.
This means that there ve rsing function can‐
not pr event entrapment in these situations. 0007
When closing thero ller sunblind, make
sure that no body parts are in thera nge
of mo vement. 0007
Release the button immediately if
somebody becomes trapped. or
0007
Press the button in any direction during
th e automatic closing process.
The closing process is stopped. Au
tomatic functions of the sliding sun roof 0009
The term "sliding sun roof" also refers to the
panoramic sliding sunroof.
By pushing or pulling the0057 button, you can
inter rupt the automatic functions: "Rain closing
function when driving" and "Automatic lo wer‐
ing".
The sliding sunroof is auto maticallyclosed when
th eve hicle has been switched off:
R if it starts torain (de tection bythera in sen‐
sor on the windscreen)
R intheeve nt of extreme outside temp eratures
R afte r six hours
R ifth ere is a malfunction in the po wer supp ly
The sliding sunroof then rises at there ar in order
to continue ventilating theve hicle interior. Opening and closing
91