2018 MAZDA MODEL MX-5 MIATA window

[x] Cancel search: window

Page 111 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual Never use warm or hot water for
removing snow or ice from windows and
mirrors as it could result in the glass
cracking.
Drive slowly. Braking performance can
be adversely affected if snow or ice

Page 117 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual 4When Driving
Information concerning safe driving and stopping.
Start/Stop Engine.............................. 4-4 Ignition Switch........ ..................... 4-4
Starting the Engine...............

Page 169 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual ▼Windshield Washer
Pull the lever toward you and hold it to
spray washer fluid.
 
Washer
OFF
NOTE
If the windshield washer is turned on when
the windshield wipers are not operating,
the windshield w

Page 170 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual CAUTION
Do not use sharp instruments or window
cleaners with abrasives to clean the
inside of the rear window surface. They
may damage the defogger grid inside the
window.
 Before opening the co

Page 226 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual Operating Tips
Operate the climate control system with
the engine running.
To prevent the battery from being
discharged, do not leave the fan control
dial on for a long period of time with the
i

Page 229 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual Manual Type
Rear window defogger switch
Air intake selector switch Fan control dial
Temperature control dial
A/C switch
Rear window defogger switch
Air intake selector switch
A/C switch Mode selector

Page 231 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual WA R N I N G
Do not use the  position in cold or rainy
weather:
Using the 
 position in cold or rainy
weather is dangerous as it will cause the
windows to fog up. Your vision will be
hampered, which c

Page 232 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual The air to the floor is warmer than air
to the face (except when the temperature
control dial is set at the extreme hot or
cold position).
▼Ventilation
1. Set the mode selector dial to the 
posit