2018 MAZDA MODEL CX-5 flat tire

[x] Cancel search: flat tire

Page 485 of 628

MAZDA MODEL CX-5 2018  Owners Manual (in English) ▼Replacing a Wheel
WA R N I N G
Always use wheels of the correct size on
your vehicle:
Using a wrong-sized wheel is dangerous.
Braking and handling could be affected,
leading to loss of control and

Page 509 of 628

MAZDA MODEL CX-5 2018  Owners Manual (in English) 7If Trouble Arises
Helpful information on what to do if a problem arises with the vehicle.
Parking in an Emergency................. 7-2 Parking in an Emergency..............7-2
Flat Tire..............

Page 511 of 628

MAZDA MODEL CX-5 2018  Owners Manual (in English) Spare Tire and Tool Storage
Spare tire and tools are stored in the locations illustrated in the diagram.
Tiedown eyelet 
Flat tire hold-down bolt
Jack lever
Lug wrench Spare tire
Jack
Type A
Type B
Sp

Page 512 of 628

MAZDA MODEL CX-5 2018  Owners Manual (in English) ▼Jack
To remove the jack
1. Open the luggage board, and lift it.
2. Remove the jack.
To secure the jack
Perform the removal procedure in reverse.
Maintenance
•Always keep the jack clean.
•Make s

Page 513 of 628

MAZDA MODEL CX-5 2018  Owners Manual (in English) Avoid driving over obstacles. Also, do
not drive through an automatic car
wash. This tires diameter is smaller
than a conventional tire, so the ground
clearance is reduced.
 Do not use a tire c

Page 514 of 628

MAZDA MODEL CX-5 2018  Owners Manual (in English) For vehicles not equipped with a
sub-woofer, turn the spare tire
hold-down bolt counterclockwise and
remove the spare tire.
Spare tire hold-down bolt
To secure the spare tire
Store the spare tire in t

Page 515 of 628

MAZDA MODEL CX-5 2018  Owners Manual (in English) 2. Shift into Park (P) and turn off theengine.
3. Turn on the hazard warning flasher.
4. Have everyone get out of the vehicle and away from the vehicle and traffic.
5. Remove the jack, tool, and spare

Page 516 of 628

MAZDA MODEL CX-5 2018  Owners Manual (in English) 4. Place the jack under the jack-upposition closest to the tire being
changed with the jack head squarely
under the jack-up point.
 
Jacking position
5. Continue raising the jack headgradually by rota