2018 MAZDA MODEL CX-3 ignition

m{zd{ c x-3 5
STARTING THE ENGINE WITH ACCELERATED WARM-UP SYSTEM (AWS)
The CX\f3 is equipped with \XSKYACTIV combustion
technology. This technology includes AWS for optimal
emission performance during cold\fstart conditions.
While Carrying the Advanced Key: •
\fTART THE ENGINE by pushing the \fTART/\fTOP ENGINE
button while pushing t\.he brake pedal.
•
WHAT WILL YOU NOTI\bE? On start-up, the engine speed\.
and sound are elevated (1500 RPM) for less than one minute to quickly bring th\.e catalyst to efficient operating temperature. The RPM will reduce to idle once the
temperature is achieved. This is normal engi\.ne operation under cold-start conditions.
• WHAT DOE\f THI\f DO? This reduces emissions and allows Mazda to improve efficiency.
•
\fHUT THE ENGINE OFF\. by making sure the vehicle is in Park and setting the electric \.
parking brake, then push the \fTART/\fTOP ENGINE button.
•
A\bTIVATE A\b\bE\f\fORIE\f (A\b\b) by pushing the \fTART/\fTOP ENGINE button once
without pushing th\.e brake pedal.
•
TURN THE IGNITION \.TO THE ON PO\fITION by pushing the \fTART/\fTOP ENGINE button
twice without pushing \.the brake pedal.
EMERGENCY ENGINE STOP
Pushing and holdin\.g the \fTART/\fTOP ENGINE button or repeatedly pushing the
\fTART/\fTOP ENGINE button while the engin\.e is running will \.turn the engine OFF\.. Use only in case of an emergency.
NOTE: You can drive the vehicle during AW\f activation; there is no need to wait. The
engine may not start if the key cannot be detected. The key indicator light may flash RED
or “Key not detected” may be displayed if the key is placed in the cup holder.
If the \fTART/\fTOP ENGINE button indicator light flashes AMBER, this could indicate a
problem with the eng\.ine starting system. You may not be able to start the engine or
switch the ignition to A\b\b or ON. Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.
\fTARTING THE ENGINE
START/STOP ENGINE button
2940109_18b CX-3 SSG_060817.indd 56/8/17 2:37 PM

6 MAZDAUSA.COM
TIRE PRESSURE MONITORING SYSTEM (TPMS)
For your safety, the CX\f3 is
equipped with TPMS that detects low tire pressure in one or more
tires. If the tire pressure starts
getting low in one or more tires, the system alerts the driver by
turning on a light in the instrument
cluster (p. 40\f41) and sounding an
alarm.
WHAT TO DO? Don’t ignore the TPM\f warning light. \ftop and check
your tire pressure (when tires are cold) and inflate the tires to the proper pressure. Properly inflated tires are safer, last longer, and increase fuel economy.
In the following cases, the TPMS must be “initialized” so the system
can operate normally.
• The tire pressure is adjusted (up or down) in one or more tires.
• A tire rotation is performed.
• Any tire or wheel is replaced.
•
The vehicle’s battery is disconnected, replaced or completely dead.
INITIALIZATION PROCESS
(TPMS WARNING LIGHT IS ILLUMINATED)
1 Park the vehicle in a safe place and firmly apply \.the parking brake.
2
Let the tires cool, then adjust the tire pressure to the specified
pressure (see tire label located on the driver’s side door jamb a\.rea)
on all four tires.
3 \fwitch the ignition ON\., but leave the vehicle parked.
4
Push and hold the \.TPM\f “\fet \fwitch" (left side of dash) until the
TPM\f warning light in the instrument cluster flashes twice and a beep sound is heard once.
NOTE: Drastic changes in temperature or altitude can affect the air
pressure in the tires and may cause the TPM\f warning light to turn on.
Verify the tire pressures when driving thr\.ough extreme temperature or altitude changes.
TPMS “Set Switch”
TIRE PRE\f\fURE MONITORING \fY\fTEM
CAUTION:
If the TPM\f “\fet
\fwitch” is pushed
without adjusting the tire pressure,
the system
cannot detect the normal tire
pressure. The
TPM\f warning light may not turn
on, even if the tire pressure is low, or it may turn on if
the tire pressure is normal.
2940109_18b CX-3 SSG_060817.indd 66/8/17 2:37 PM

m{zd{ c x-3 7
FOLDING REAR SEATS
Push the button to fold down the seatback.
(Left rear seat release is shown.)
NOTE: For tall drivers and front passengers who adjust the
front seats all the way back, the headrests on the rear seats
need to be removed when folding the rear
seatbacks down. If not removed, the rear headrest will push into the front seatback.
In order to remove the headrest from
the rear seat, the seatback needs to
be tilted slightly forward.
RETURNING REAR SEATS TO UPRIGHT POSITION:
1 Install the headrest (if removed).
2 Raise the seatbacks until they lock into position.
3
Pull on the top of the seatbacks to make sure they are locked.
4
\bheck that all seat belts are routed properly for passenger use.
MEMORY SEAT SWITCH (IF EQUIPPED)
To Program the Driver’s \feat and Active Driving Display
position/brightness Memory Position.
1 Turn the ignition s\.witch off.
2
Adjust seat to the desired position using the s\.lide/tilt and
recline switches. Adjust the Active Driving Display position/brightness using the MAZDA \bONNE\bT settings. Push and
hold the memory seat \fET button until a beep is heard.
3 Within 5 seconds:
• To program a memory seat button, push and hold \.memory button 1 or 2 until a beep
sound is heard.
•
To program a key, push and hold th\.e key unlock button until a beep sound is heard
(two registered keys can be programmed).
Unlocked
Locked
Memory seat switch
\fEAT\f

FUEL ECONOMY:
To achieve the best fuel economy, visit www.fueleconomy.gov
for more information.
2940109_18b CX-3 SSG_060817.indd 76/8/17 2:38 PM

18 MAZDAUSA.COM
PLANNING A ROUTE USING VOICE COMMANDS
To plan a route to an address using your voice: 1 Push the TALK
button on the steering wheel.
2 When you hear the tone, say “Address”.
3
When on the address screen, say the full address (without zip code) for your
destination, for example “123 Main \ft., Los Angeles, \balifornia”. The system does not recognize zip codes.
4
\fay “Yes” if the address is correct. If shown a list of addresses, say the list number for
the correct address or say “None of these”.
NOTE:
• For best results, say the full address without pausing between words.
• Voice guidance can be skipped by pushing the TALK
button.
•
When prompt voice guidance is muted, you will need to go into Navigation \fettings to
turn the volume back on for the NAVI button to repeat the last instructions.
To remove or insert the MAP SD card (to update the map database): 1 Turn the ignition O\.FF.
2
Locate the \fD card slot located in the
center console.
Remove card:
Open the cover and push the card once, then
pull it out.
Insert card:
Push the card in (label-side u\.p), then
close the cover.
NOTE:
•
Visit www.mazdausa.com/navigation and download the most recent map available
for your device for free for three years from vehicle delivery.
•
For assistance with the navigation system, visit www.mazdausa.com/mazdaconnect or
call 800\f430\f0153.
•
Only use your MAP \fD card for operating and updating\. your navigation system.
DO NOT insert the MAP \fD card into another vehicle or into any other device such
as a camera.
• DO NOT put other \fD cards in this slot.
SD card slot
NAVIGATION \fY\fTEM
\bONTINUED
2940109_18b CX-3 SSG_060817.indd 186/8/17 2:38 PM

m{zd{ c x-3 19
A\bTIVE DRIVING DI\fPLA\.Y
(IF EQUIPPED)
ACTIVE DRIVING DISPLAY
To change the settings/adjustments for the Active Driving Display:
1 \felect the \fettings icon on the Home screen.
2 \felect the AD-Disp \.tab.
3 \felect the desired item to change.
HEIGHT: Adjust the position of the virtual image of
the Active Driving Display up or down.
BRIGHTNESS CONTROL: Method for adjusting
screen brightness (automatically with instrument
cluster illumination or\. manually).
CALIBRATION: Brightness initialization setting
(when selecting automatic adjustment).
BRIGHTNESS: Brightness adjustment (when
selecting manual ad\.justment).
NAVIGATION: On/Off.
ACTIVE DRIVING DISPLA\XY: On/Off.
RESET: Reset to default settings.
NOTE:
•
If the display does not operate, switch the ignition
OFF and then switch it back ON. If it still does not
operate even with the igniti\.on switched ON, have the vehicle inspected at an Authorized
Mazda Dealer.
•
It may be difficult to view the display when wearing sunglasses.
Take off your sunglasses or adjust the luminosity.
•
If the battery has been removed and re-installed or the battery
voltage is low, the adjusted position may deviate.
•
The display may be difficult to view or be temporarily affected by
weather conditions such as \.rain, snow, light, and temperature.
Vehicle Speed Setting using cruise control
Navigation Turn\fBy\fTurn(TBT) direction, distance and lane guidance
Traffic Sign Recognition(TSR) using navigation
55Speed Limit
IF EQUIPPED
Lane Departure Warning
System (LDWS) operation conditions and warnings
Smart Brake Support (SBS) warnings
Vehicle Speed Setting using cruise control
CAUTION:
Always adjust the
display using the
\fettings screen
(AD-Disp tab).
DO NOT try to
adjust the angle
or open/close the
display by hand.
Fingerprints on
the display will
make it difficult to
view and manual
operation could
cause damage.
2940109_18b CX-3 SSG_060817.indd 196/8/17 2:38 PM

m{zd{ c x-3 31
Pull to
dispense
windshield
washer fluidMISTAUTO
LO
HI
12
3
WIPER / WA\fHER \bONTROL
CAUTION:
If the ignition is\. ON, turn
the AUTO wipers OFF
when going through a car
wash or while cleaning or touching the windsh\.ield.
WINDSHIELD WIPER / WASHER CONTROL LEVER
(IF EQUIPPED)
The rain sensor senses the amount of rainfall and
turns the wipers on or off.
Rotating the inner ri\.ng
clockwise (away from you)
creates greater wiper sensitivity and makes the
wipers move faster. The + position increases wiper
speed. Rotating the inner ring counterclockwise
(toward you) makes the wipers move
slower. The - position
decreases wiper speed.
Normal speed
Intermittent
REAR WINDOW
WIPER/WASHER
(hold as desired)
NOTE: Vehicles not equipped with AUTO wipers will have
INT wipers. \fet the lever to INT and choose an interval timing by rotating the ring between fast and slow.
Windshield
wiper/washer
control lever
2940109_18b CX-3 SSG_060817.indd 316/8/17 2:40 PM

m{zd{ c x-3 37
1 Locate the U\fB port or AUX jack.
2
\bonnect the device plug into the portable audio player and into the U\fB port or AUX jack.
3 Turn the vehicle audio system on.
4 Audio \bontrols: \felect AUX or U\fB from the \fources menu.
5
U\fB Port: Use the vehicle’s audio system or steering wheel controls to control the
connected U\fB device.

AUX Jack: Use the portable audio player controls to play music.
NOTE: When using a U\fB mem\.ory stick, the system plays the first audio file when
restarting the vehicle. It does not start where it left off when turning off the engine.
12 VOLT ACCESSORY SOCKET
The accessory socket is on with the i\Xgnition in ACC or ON. The accessory socket is located at the front of the vehicle.
NOTE: When using the accessory socket, make sure to disconnect any device from it
when turning off the ignition; otherwise, the vehicle’s battery could go dead.
AUDIO U\fB and AUX INPUT\f
2940109_18b CX-3 SSG_060817.indd 376/8/17 2:40 PM

42 MAZDAUSA.COM
MANUAL SHIFT MODE
Manual Shift Mode g\Xives you the feel of driving a manual \Xtransmission by allowing you
to manually shift to control engine rpm and \Xtorque when more control is desired.
To Use Manual Shift Mode\X:
\fhift the lever from D to M.
To Shift Up To A Higher Gear:
Tap the shift lever back (+) once.
To Shift Down To A Lower Gear:
Tap the shift lever forward (-) once.
DRIVE SELECTION
SPORT mode will choose a lower gear for increased
acceleration response. It will also hold a lower gear/
delay upshifting when it d\Xetects you are braking or
cornering because it anticipates that you will want to
accelerate out of the turn more quickly.
Push the \fPORT button to switch to \fPORT mode
and the \fPORT mode indicator light in the instrument
cluster turns on. Push again\. to turn off.
NOTE: If the \fET button of the cruise control is pushed while\. in \fPORT mode, \fPORT
mode is switched off. \fPORT mode cannot be turned on or off when cornering.
• When the ignition i\.s switched OFF, \fPORT mode is also switched off.
•
Fuel consumption increases slightly when using \fPOR\.T mode.
TRAN\fMI\f\fION
SPORT
button
2940109_18b CX-3 SSG_060817.indd 426/8/17 2:40 PM