2018 MAZDA MODEL 6 lights

xVehicles approaching in the opposite direction
xPedestrians
xStationary objects (stopped vehicles, obstructions)
xIf a vehicle ahead is travelling at an extremely low speed, the system may not detect it
correctly.
xDuring headway control travel, do not set the system on two-wheeled vehicles such as
motorcycles and bicycles.
xDo not use the MRCC system under conditions in which the close proximity warnings are
frequently activated.
xDuring headway control travel, the system accelerates and decelerates your vehicle in
conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate
for a lane change or if the vehicle ahead brakes suddenly causing you to close in on the
vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake
pedal depending on the conditions.
xWhile the MRCC system is in use, it does not cancel even if the selector lever (automatic
transaxle)/shift lever (manual transaxle) is operated and any intended engine braking will
not occur. If deceleration is required, lower the vehicle speed setting or depress the brake
pedal.
xThe brake lights are illuminated while the MRCC automatic braking is operating,
however, they may not be illuminated while the vehicle is on a down slope at the set
vehicle speed or travelling at a constant speed and following a vehicle ahead.
xThe MRCC warning light (amber) illuminates when the system has a malfunction.
Refer to Contact Mazda Repairer and Have Vehicle Inspected on page 7-49.
x(With Adjustable Speed Limiter (ASL))
The headway control operation can be cancelled and the system can be switched to only
Adjustable Speed Limiter (ASL).
Refer to Adjustable Speed Limiter (ASL) on page 4-212.
x(With Intelligent Speed Assistance (ISA))
The headway control operation can be cancelled and the system can be switched to only
Intelligent Speed Assistance (ISA).
Refer to Intelligent Speed Assistance (ISA) on page 4-221.
x(Except Adjustable Speed Limiter (ASL)/Intelligent Speed Assistance (ISA))
The headway control operation can be cancelled and the system can be switched to only
cruise control.
Refer to Cruise Control Function on page 4-183.
:KHQ'ULYLQJ
L$&7,96(16(


xDuring headway control travel, the system accelerates and decelerates your vehicle in
conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate
for a lane change or if the vehicle ahead brakes suddenly causing you to close in on the
vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake
pedal depending on the conditions.
xWhile the MRCC with Stop & Go function system is in use, it does not cancel even if the
selector lever is operated and any intended engine braking does not occur. If deceleration
is required, lower the set speed or depress the brake pedal.
xThe sound of the automatic brakes operating may be heard, however, it does not indicate
a problem.
xThe brake lights turn on while the MRCC with Stop & Go function automatic braking is
operating, however, they may not turn on while the vehicle is on a downslope at the set
vehicle speed or travelling at a constant speed and following a vehicle ahead.
:KHQ'ULYLQJ
L$&7,96(16(


▼6WRS+ROG&RQWURO
:KLOHLQKHDGZD\FRQWUROXVLQJWKH05&&ZLWK6WRS *RIXQFWLRQV\VWHP\RXUYHKLFOH
ZLOOVWRSZKHQDYHKLFOHDKHDGVWRSV:KHQWKHYHKLFOHLVVWRSSHGDQGWKHVWRSKROGFRQWURO
RSHUDWHVWKH05&&ZLWK6WRS *RIXQFWLRQLQGLFDWRUOLJKWWXUQVRQ
NOTE
xIf the MRCC with Stop & Go function system is cancelled during stop hold control, the
vehicle is held in its stopped position. The stop hold control can be cancelled by
performing one the following actions.
xPress the accelerator pedal and resume driving the vehicle.
xWhile forcefully depressing the brake, switch the MRCC with Stop & Go function
system off.
xThe parking brake is automatically applied and the vehicle is held in its stopped position
when 10 minutes have elapsed since the stop hold control operated. At this time, the
MRCC with Stop & Go function system is cancelled.
xIf the i-stop operation conditions are met during stop hold control, the engine stops even
though the brake pedal is not depressed.
Refer to i-stop on page 4-12.
xThe brake lights turn on during stop hold control.
7RUHVXPHGULYLQJ
$IWHUWKHYHKLFOHDKHDGVWDUWVPRYLQJZKLOH\RXUYHKLFOHLVVWRSSHGXQGHUVWRSKROGFRQWURO
SUHVVWKH5(6VZLWFKRUGHSUHVVWKHDFFHOHUDWRUSHGDOWRFDQFHOWKHVWRSKROGFRQWURODQG
UHVXPHGULYLQJ
NOTE
xWhen you resume driving by pressing the RES switch, your vehicle does not start moving
until the distance between your vehicle and the vehicle ahead lengthens to the specified
distance or farther.
xThe engine restarts automatically when any of the actions to resume driving are
performed while i-stop is operating.
xIf the MRCC with Stop & Go function is temporarily cancelled during stop hold control,
you cannot resume driving by pressing the RES switch when there are no vehicles in front
of your vehicle. Depress the accelerator pedal and resume driving the vehicle.
:KHQ'ULYLQJ
L$&7,96(16(


xIf the steering wheel, accelerator pedal, or brake pedal is operated abruptly and the
vehicle moves close to a white (yellow) line, the system determines that the driver is
making a lane change and the LAS & LDWS operation is temporarily cancelled. The LAS
& LDWS becomes operational again when the system detects white (yellow) lane lines
while the vehicle is being driven normally within its vehicle lane.
xIf the vehicle deviates from its lane repeatedly within a short period of time, the LAS &
LDWS may not operate.
xWhen white (yellow) lane lines are not detected, the LAS & LDWS does not operate.
xUnder the following conditions, the LAS & LDWS may not be able to detect white (yellow)
lane lines correctly and it may not operate normally.
xIf an object placed on the instrument panel is reflected in the windscreen and picked up
by the camera.
xHeavy luggage is loaded in the luggage compartment or on the rear seat and the
vehicle is tilted.
xThe tyre pressures are not adjusted to the specified pressure.
xTyres other than conventional tyres are equipped.
xVehicle is driven on an intersection or junction, or on a forked road.
xThe white (yellow) lane lines are less visible because of dirt or fading/patchiness.
xA vehicle in front of your vehicle is running near a white (yellow) lane line making it
less visible.
xA white (yellow) lane line is less visible because of bad weather (rain, fog, or snow).
xThe vehicle is driven on a temporary lane or section with a closed lane resulting from
construction where there may be multiple white (yellow) lane lines or they are
interrupted.
xA misleading line is picked up on the road such as a temporary line for construction, or
because of shade, lingering snow, or grooves filled with water.
xThe surrounding brightness suddenly changes such as when entering or exiting a
tunnel.
xThe illumination of the headlights is weakened because of dirt or the optical axis is
deviated.
xThe windscreen is dirty or foggy.
xThe windscreen, camera is fogged (water droplets).
xBack-light is reflected off the road surface.
xThe road surface is wet and shiny after rain, or there are puddles on the road.
xThe shade of a guardrail parallel to a white (yellow) lane line is cast on the road.
xThe width of the driving lane is narrow or wide.
xDriving on roads with tight curves.
xThe road is excessively uneven.
xThe vehicle is shaken after hitting a road bump.
xThere are 2 or more adjacent white (yellow) lane lines.
:KHQ'ULYLQJ
L$&7,96(16(


6PDUW%UDNH6XSSRUW
6%6

7KH6%6V\VWHPDOHUWVWKHGULYHURID
SRVVLEOHFROOLVLRQXVLQJDGLVSOD\DQG
ZDUQLQJVRXQGLIWKHUDGDUVHQVRUIURQW
DQGWKH)RUZDUG6HQVLQJ&DPHUD)6&
GHWHUPLQHWKDWWKHUHLVWKHSRVVLELOLW\RID
FROOLVLRQZLWKDYHKLFOHDKHDGZKLOHWKH
YHKLFOHLVEHLQJGULYHQDWDERXWNPKRU
IDVWHUPSKRUIDVWHU)XUWKHUPRUHLI
WKHUDGDUVHQVRUIURQWDQGWKH)RUZDUG
6HQVLQJ&DPHUD)6&GHWHUPLQHVWKDWD
FROOLVLRQLVXQDYRLGDEOHWKHDXWRPDWLF
EUDNHFRQWUROLVSHUIRUPHGWRUHGXFH
GDPDJHLQWKHHYHQWRIDFROOLVLRQ
,QDGGLWLRQZKHQWKHGULYHUGHSUHVVHVWKH
EUDNHSHGDOWKHEUDNHVDUHDSSOLHGILUPO\
DQGTXLFNO\WRDVVLVW%UDNH$VVLVW6%6
EUDNHDVVLVW
:$ 5 1 , 1 *
Do not rely completely on the SBS system
and always drive carefully:
The SBS is designed to reduce damage in
the event of a collision, not avoid an
accident. The ability to detect an
obstruction is limited depending on the
obstruction, weather conditions, or traffic
conditions. Therefore, if the accelerator
pedal or brake pedal is mistakenly
operated it could result in an accident.
Always verify the safety of the surrounding
area and depress the brake pedal or
accelerator pedal while keeping a safer
distance from vehicles ahead or on-coming
vehicles.
&$87,21
In the following cases, turn the system off
to prevent a mis-operation:
¾The vehicle is being towed or when
towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in
areas of dense grass or off-road.
NOTE
xThe SBS system operates when all of the
following conditions are met:
xThe ignition is switched ON.
xThe SBS system is on.
xThe vehicle speed is about 15 km/h or
faster (10 mph or faster).
xThe relative speed between your
vehicle and the vehicle ahead is about
15 km/h or faster (10 mph or faster).
xThe Dynamic Stability Control (DSC)
is not operating.
xThe SBS system may not operate under
the following conditions:
xIf the vehicle is accelerated rapidly
and it comes close to a vehicle ahead.
xThe vehicle is driven at the same
speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xThe direction indicator is being used.
xWhen the vehicle ahead is not
equipped with tail lights or the tail
lights are turned off.
:KHQ'ULYLQJ
L$&7,96(16(

6RPHPRGHOV

xThe 360°View Monitor has limitations. Objects under the bumper or near both ends of the
bumper cannot be displayed.
xObstructions above the upper image range of the camera are not displayed.
xUnder the following conditions, the screen might be difficult to view, however this does
not indicate a problem.
xThe temperature near the lens is high/low.
xRainy conditions, water droplets on the camera, or high humidity.
xMud or foreign matter near the camera.
xExtremely bright light such as sunlight or headlights hitting the camera lens directly.
xBecause the 360°View Monitor camera uses a special lens, the distance displayed on the
screen differs from the actual distance.
xObstructions displayed on the screen may appear differently than in actuality.
(Obstructions may appear fallen, larger, or longer than they actually are.)
xDo not apply stickers to a camera or the area around it. In addition, do not install
accessories or an illuminated number/character number plate to the area around a
camera. Otherwise, the camera may not correctly display the surrounding conditions.
:KHQ'ULYLQJ
L$&7,96(16(


&$87,21
¾Do not apply accessories, stickers or
film to the windscreen near the Forward Sensing
Camera (FSC).
If the area in front of the Forward Sensing Camera (FSC) lens is obstructed, it will cause the
system to not operate correctly. Consequently, each system may not operate normally
which could lead to an unexpected accident.
¾Do not disassemble or modify the Forward Sensing Camera (FSC).
Disassembly or modification of the Forward Sensing Camera (FSC) will cause a malfunction
or mistaken operation. Consequently, each system may not operate normally which could
lead to an unexpected accident.
¾Heed the following cautions to assure the correct operation of the Forward Sensing Camera
(FSC).
¾Be careful not to scratch the Forward Sensing Camera (FSC) lens or allow it to get dirty.
¾Do not remove the Forward Sensing Camera (FSC) cover.
¾Do not place objects on the instrument panel which
reflect light.
¾Always keep the windscreen glass around the camera clean by removing dirt or fogging.
Use the windscreen defroster to remove fogging on the windscreen.
¾Consult an expert repairer, we recommend an Authorised Mazda Repairer regarding
cleaning the interior side of the windscreen around the Forward Sensing Camera (FSC).
¾Consult an expert repairer, we recommend an Authorised Mazda Repairer before
performing repairs around the Forward Sensing Camera (FSC).
¾The Forward Sensing Camera (FSC) is installed to the windscreen. Consult an expert
repairer, we recommend an Authorised Mazda Repairer for windscreen repair and
replacement.
¾When cleaning the windscreen, do not allow glass cleaners or similar cleaning fluids to
get on the Forward Sensing Camera (FSC) lens. In addition, do not touch the Forward
Sensing Camera (FSC) lens.
¾When performing repairs around the rearview mirror, consult an expert repairer, we
recommend an Authorised Mazda Repairer.
¾Consult an expert repairer, we recommend an Authorised Mazda Repairer regarding
cleaning of the camera lens.
¾Do not hit or apply strong force to the Forward Sensing Camera (FSC) or the area around
it. If the Forward Sensing Camera (FSC) is severely hit or if there are cracks or damage
caused by
flying gravel or debris in the area around it, stop using the following systems
and consult an expert repairer, we recommend an Authorised Mazda Repairer.
¾High Beam Control System (HBC)
¾Adaptive LED Headlights (ALH)
¾Lane Departure Warning System (LDWS)
¾Driver Attention Alert (DAA)
:KHQ'ULYLQJ
L$&7,96(16(


¾Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
¾Traffic Sign Recognition System (TSR)
¾Advanced Smart City Brake Support (Advanced SCBS)
¾Smart City Brake Support [Forward] (SCBS F)
¾Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)
¾Smart Brake Support (SBS)
¾The direction in which the Forward Sensing Camera (FSC) is pointed has been finely
adjusted. Do not change the installation position of the Forward Sensing Camera (FSC) or
remove it. Otherwise, it could result in damage or malfunction.
¾Always use tyres for all wheels that are of the specified size, and the same manufacturer,
brand, and tread pattern. In addition, do not use tyres with significantly different wear
patterns on the same vehicle as the system may not operate normally.
¾The Forward Sensing Camera (FSC) includes a function for detecting a soiled windscreen
and informing the driver, however, depending on the conditions, it may not detect plastic
shopping bags, ice or snow on the windscreen. In such cases, the system cannot accurately
determine a vehicle ahead and may not be able to operate normally. Always drive carefully
and pay attention to the road ahead.
NOTE
xIn the following cases, the Forward Sensing Camera (FSC) cannot detect target objects
correctly, and each system may be unable to operate normally.
xThe height of the vehicle ahead is low.
xYou drive your vehicle at the same speed as the vehicle ahead.
xHeadlights are not turned on during the night or when going through a tunnel.
xIn the following cases, the Forward Sensing Camera (FSC) may not be able to detect
target objects correctly.
xUnder bad weather condition, such as rain, fog and snow.
xThe window washer is being used or the windscreen wipers are not used when it's
raining.
xIce, fog, snow, frost, rainfall, dirt, or foreign matter such as a plastic bag is stuck on the
windscreen.
xTrucks with low loading platforms and vehicles with an extremely low or high profile.
xWhen driving next to walls with no patterning (including fences and longitudinally
striped walls).
xThe tail lights of the vehicle ahead are turned off.
xA vehicle is outside the illumination range of the headlights.
xThe vehicle is making a sharp turn, or ascending or descending a steep slope.
xEntering or exiting a tunnel.
xHeavy luggage is loaded causing the vehicle to tilt.
:KHQ'ULYLQJ
L$&7,96(16(