2018 LINCOLN CONTINENTAL brake

[x] Cancel search: brake

Page 226 of 615

LINCOLN CONTINENTAL 2018  Owners Manual If the transmission is in neutral (N), the sidesensing system provides visual distanceindication only when your vehicle is movingbelow a speed of 5 mph (8 km/h) and thereis a front or rear parking aid

Page 227 of 615

LINCOLN CONTINENTAL 2018  Owners Manual Note:Keep the sensors free from snow, iceand large accumulations of dirt.
Note:Do not cover up the sensors.
Note:Do not clean the sensors with sharpobjects.
Note:The sensors may not detect objectswith

Page 228 of 615

LINCOLN CONTINENTAL 2018  Owners Manual To toggle through the modes, use thebuttons on the information display to selectthe following:
•Parallel parking.
•Perpendicular parking.
•Parallel park out assist.
•Switch the system off.
Not

Page 229 of 615

LINCOLN CONTINENTAL 2018  Owners Manual Automatically Steering into a ParallelParking Space
When you shift into reverse (R), with yourhands off the steering wheel and nothingobstructing its movement, your vehicle steersitself into the space

Page 231 of 615

LINCOLN CONTINENTAL 2018  Owners Manual When you believe your vehicle is correctlyparked, or a solid tone sounds and aninformation message appears, bring yourvehicle to a complete stop.
When the active park assist maneuver iscomplete, a ton

Page 240 of 615

LINCOLN CONTINENTAL 2018  Owners Manual PRINCIPLE OF OPERATION
Cruise control lets you maintain a set speedwithout keeping your foot on the acceleratorpedal. You can use cruise control when yourvehicle speed is greater than 20 mph(30 km/h).

Page 241 of 615

LINCOLN CONTINENTAL 2018  Owners Manual Resuming the Set Speed
Press RES.
Switching Cruise Control Off
Note:You erase the set speed when youswitch the system off.
Press OFF when the system is in standbymode, or switch the ignition off.
USIN

Page 242 of 615

LINCOLN CONTINENTAL 2018  Owners Manual The adaptive cruise controls are on thesteering wheel.
Switching Adaptive Cruise Control On
Press ON.
The indicator, current gap settingand set speed appear in theinformation display.
Setting the Adap