2018 LEXUS LS500 ECO mode

452 8-1. Specifications
LS500_OM_OM50F54U_(U) *
: The fluid capacity is a reference quantity.
If replacement is necessary, contact your Lexus dealer.
*
: Your Lexus vehicle is filled with Toyota ge nuine gear oil at the factory. Use Lexus
approved Toyota genuine gear oil or an equi valent of matching qu ality to satisfy the
above specification. Plea se contact your Lexus dealer for further details.
*
: Your Lexus vehicle is filled with “Toyota Genu ine Differential Gear Oil” at the factory.
Use Lexus approved “Toyota Ge nuine Differential Gear Oil” or an equivalent oil of Electrical system (battery) Specific gravity reading at 68°F
(20°C): 12.3 V or higher
(Turn the engine switch off and turn on the head-
lights for 20 to 30 seconds.)
Charging rates
Quick charge
Slow charge 15 A max.
5 A max.
Automatic transmission Fluid capacity *
9.5 qt. (9.0 L, 7.9 Imp. qt.)
Fluid type Toyota Genuine ATF WS
NOTICE■
Automatic transmission fluid type
Using transmission fluid other than “Toyota Genuine ATF WS” may ca use deterioration in
shift quality, locking up of your transmission accompanied by vibration, and ultimately
damage the transmission of your vehicle.
Transfer (AWD models) Oil capacity 0.74 qt. (0.70 L, 0.62 Imp. qt.)
Oil type and viscosity *
Toyota Genuine Transfer gear oil LL 80 or equivalent
Front differential (AWD models) Oil capacity 0.69 qt. (0.65 L, 0.57 Imp. qt.)
Oil type and viscosity *
Toyota Genuine Differential gear oil LT 75W-85
GL-5 or equivalent

4538-1. Specifications
LS500_OM_OM50F54U_(U) 8
Vehicle specifications matching quality to satisfy th e above specification. Please contact your Lexus dealer for
further details. 
2WD models 
AWD models *
: Your Lexus vehicle is filled with “Toyota Genu ine Differential Gear Oil” at the factory.
Use Lexus approved “Toyota Ge nuine Differential Gear Oil” or an equivalent oil of
matching quality to satisfy th e above specification. Please contact your Lexus dealer for
further details.
*1
: Minimum pedal clearance when depressed with a force of 11 2 lbf (500 N, 51 kgf) while
the engine is running.
When performing the brake pedal inspection, also be sure to check that the brake sys-
tem warning light is not illuminated when th e engine is running. (If the brake system Rear differential Oil capacity 0.90 qt. (0.85 L, 0.75 Imp. qt.)
Oil type and viscosity *
Toyota Genuine Differential gear oil LT 75W-85
GL-5 or equivalent
Oil capacity 1.42 qt. (1.35 L, 1.19 Imp. qt.)
Oil type and viscosity *
Toyota Genuine Differential gear oil LT 75W-85
GL-5 or equivalent
Brakes Pedal clearance *1
4.8 in. (121 mm) Min. *3
4.8 in. (122 mm) Min. *4
Pedal free play 0.04 ⎯ 0.24 in. (1 ⎯ 6 mm)
Brake pad wear limit 0.04 in. (1 mm)
Parking brake lining wear limit 0.04 in. (1 mm)
Parking brake indicator *2
When pushing the parking brake switch for 1 to 2
seconds: comes on
When pulling the parking brake switch for 1 to 2
seconds: turns off
Fluid type FMVSS No.116 DOT 3 or SAE J1703
FMVSS No.116 DOT 4 or SAE J1704

4658-1. Specifications
LS500_OM_OM50F54U_(U) 8
Vehicle specifications Innerliner separation The parting of the innerliner from cord material in
the carcass
Intended outboard sidewall (a) The sidewall that contains a whitewall, bears
white lettering, or bear s manufacturer, brand,
and/or model name molding that is higher or
deeper than the same molding on the other sidewall
of the tire, or
(b) The outward facing side wall of an asymmetrical
tire that has a particular side that must always face
outward when mounted on a vehicle
Light truck (LT) tire A tire designated by its manufacturer as primarily
intended for use on lightwe ight trucks or multipur-
pose passenger vehicles
Load rating The maximum load that a tire is rated to carry for a
given inflation pressure
Maximum load rating The load rating for a tire at the maximum permissi-
ble inflation pressure for that tire
Maximum permissible inflation pres-
sure The maximum cold inflation pressure to which a tire
may be inflated
Measuring rim The rim on which a tire is fitted for physical dimen-
sion requirements
Open splice Any parting at any junction of tread, sidewall, or
innerliner that extends to cord material
Outer diameter The overall diameter of an inflated new tire
Overall width The linear distance between the exteriors of the
sidewalls of an inflated tire, including elevations due
to labeling, decorations, or protective bands or ribs
Passenger car tire A tire intended for use on passenger cars, multipur-
pose passenger vehicles, and trucks, that have a
gross vehicle weight rating (GVWR) of 10,000 lb.
or less.
Ply A layer of rubber-c oated parallel cords
Ply separation A parting of rubber compound between adjacent
pliesTire related term Meaning

470 8-2. Customization
LS500_OM_OM50F54U_(U) *1
: For details about each function: → P.81*2
: The default setting varies according to country. *3
:F SPORT models
■
Head-up Display *
( → P.83)Drive information 1 Current fuel con-
sumption
Customizable
items: → P.78 — O — —Average fuel
economy (after
reset)
Drive information 2 Distance (driving
range)
Average vehicle
speed (after
reset)
Clock 12-hour display 24-hour display — O — —
Pop-up display On Off — O — —
Accent color Color 1 Color 2 O O — —
Rev indicator *3
5000 r/min. 2000 - 6400
r/min.
— O — —
Off
Rev peak *3
On Off — O — —
Eco Driving Indicator Light On Off — O — —
Suggestion function On On (when the
vehicle is
stopped) O — — O
Off
Function Default setting Customized set-
ting
Gauge information Tachometer Eco Driving Indi-
cator
— O — —
No contentFunction *1
Default setting Customized set-
ting A B C D
A B C D

4798-2. Customization
LS500_OM_OM50F54U_(U) 8
Vehicle specifications ■
Driving mode select switch ( → P.289)*
:If equipped ■
Electronically modulated air suspension *
( → P.291)*
:If equipped ■
Automatic air conditioning system ( → P.313)
■
Seat heater/seat ventilators *
( → P.326)Function Default setting Customized set-
ting
Powertrain control in custom
mode *
Normal Power
O — — —
Eco
Chassis control in custom
mode *
Normal Sport
O — — —
Comfort
Air conditioning operation in
custom mode *
Normal Eco O — — —
Function Default setting Customized set-
ting
Vehicle height control On Off — O — —
Ingress/egress height control
function On Off — O — —
Vehicle height when parked Normal High — O — —
Function Default setting Customized set-
ting
A/C auto switch operation On Off O — — O
Exhaust gas sensor sensitivity Standard -3 to 3 O — — O
Function Default setting Customized set-
ting
Driver’s seat temperature
preference in automatic
mode Standard -2 (cooler) to 2
(warmer) O — — O
Passenger’s seat tempera-
ture preference in automatic
mode Standard -2 (cooler) to 2
(warmer) O — — O A B C D
A B C D
A B C D
A B C D

480 8-2. Customization
LS500_OM_OM50F54U_(U) *
:If equipped ■
Heated steering wheel *
( → P.326)*
:If equipped
■
Illumination ( → P.330)Left-hand rear seat tempera-
ture preference in automatic
mode *
Standard -2 (cooler) to 2
(warmer) O — — O
Right-hand rear seat tem-
perature preference in auto-
matic mode *
Standard -2 (cooler) to 2
(warmer) O — — O
Engine switch linked auto-
matic activation of the
left-hand rear seat
heater/ventilator *
Off On O — — O
Engine switch linked auto-
matic activation of the
right-hand rear seat
heater/ventilator *
Off On O — — O
Function Default setting Customized set-
ting
Steering wheel heating pref-
erence in automatic mode Standard -2 (low) to 2
(high) O — — O
Function Default setting Customized set-
ting
Time elapsed before the inte-
rior lights turn off 15 seconds Off
O — — O7.5 seconds
30 seconds
Operation after the engine
switch is turned off On Off — — — O
Operation when the doors
are unlocked On Off — — — OFunction Default setting Customized set-
ting A B C D
A B C D
A B C D

4818-2. Customization
LS500_OM_OM50F54U_(U) 8
Vehicle specifications
■
Vehicle customization●
When the smart access system with
push-button start is off, the entry unlock
function cannot be customized.●
When the doors remain closed after
unlocking the doors and the timer acti-
vated automatic door lock function acti-
vates, signals will be generated in
accordance with the operation buzzer
volume and operational signal (Emer-
gency flashers) function settings.
●
Some settings can be changed using a
switch or the audio system screen. If a
setting is changed using a switch, the
changed setting will not be reflected on
the audio system screen until the engine
switch is turned of f and then to IGNI- TION ON mode. ■
Clock settings screen
If the clock adjustment screen is displayed
continuously when attempting to change
the clock settings, the system may be mal-
functioning. Have the vehicle inspected by
your Lexus dealer.Operation when you
approach the vehicle with the
electronic key on your person On Off — — — O
Footwell lights On Off — — — O
Instrument panel ornament
light and door trim ornament
lights On Off — — — O
Time elapsed before the outer
foot lights turn off 15 seconds Off
O — — O7.5 seconds
30 seconds
Operation of the outer foot
lights when you approach the
vehicle with the electronic
key on your person On Off — — — O
Operation of the outer foot
lights when the doors are
unlocked On Off — — — O
Operation of the outer foot
lights when a door is opened On Off — — — O
Fading out of the outer foot
lights when they turn off Long Short — — — OFunction Default setting Customized set-
ting A B C D

4951-1. What to do if... (Troubleshooting)
LS500_OM_OM50F54U_(U) 495What to do if... (Troubleshooting)
( → P.438)
 It is locked automatically to prevent
theft of the vehicle. ( → P.160)
 Is the window lock switch pressed? The power window except for the one at
the driver’s seat cannot be operated if the
window lock switch is pressed. ( →
P.141 )
 The auto power off function will be
operated if the vehicle is left in
ACCESSORY mode for a period of
time. ( → P.162)
 The seat belt reminder light is flash-
ing Are the driver and the front passenger
wearing the seat belts? ( →
P.421 )
 The parking brake indicator is on Is the parking brake released? ( →
P.170 )
Depending on the situation, other
types of warning buzzer may also
sound. ( → P.418, 428)  Did anyone inside the vehicle open
a door during setting the alarm? The sensor detects it and the alarm sounds.
( →
P.60 )
Do one of the following to deactivate
or stop the alarms:
 Unlock the doors.
 Turn the engine switch to ACCES-
SORY or IGNITION ON mode, or
start the engine. (The alarm will be
deactivated or stopped after a few
seconds.)
 Is the message displayed on the
multi-information display? Check the message on the multi-informa-
tion display. ( →
P.428 )
 When a warning light turns on or a
warning message is displayed, refer
to P.418, 428.
 Slow down the vehicle, drive with The steering wheel cannot be
turned after the engine is
stopped
The windows do not open or
close by operating the power
window switches
The engine switch is turned off
automatically
A warning buzzer sounds during
driving An alarm is activated and the
horn sounds
A warning buzzer sounds when
leaving the vehicle
A warning light turns on or a
warning message is displayed
When a problem has occurred If you have a flat tire