2018 Lexus LC500h display

64
LC500_LC500h_QG_OM11444U_(U)
Vehicle information can be displayed on the side display.
Select or to display the desired screen.
●Trip information (type A/type B)
● History
● Energy monitor (LC500h)
Side display

68
LC500_LC500h_QG_OM11444U_(U)
Search by category ( )
5Select “Category”.
6Select the desired search point.
Select to set the search point from near
the current position
Select to search for POIs along the set
route
Select to set the search point from near
a city center
Select to set the search point from near
a destination
When more than 1 destination has
been set, a list will be displayed on the
screen.
Select the item to be set.
7Select the desired POI category.
8Select the desired POI.
 Search by phone number ( )
6Select “Phone #”.
7Enter a phone number and select “OK”.
B
A
B
C
D
C

69
LC500_LC500h_QG_OM11444U_(U)
To use the hands-free system, it is necessary to register a Bluetooth® phone with the system.
Please refer to the cellular phone manufacturer’s user guide for pairing procedures, or go to
http://www.lexus.com/MobileLink
to find approved Bluetooth® phones for this system.
1Turn the Bluetooth® connection setting of your cellular phone on.
2Press the “MENU” button on the Remote Touch.
Please refer to P.58 for the Remote Touch operation.
3Select “Setup”.
4Select “Bluetooth*” on the sub menu.
Operations up to this point can also be performed by pressing the switch on the
steering wheel.
5Depending on situation, the di fferent screen is displayed.
● If there is a registered devi ce, select “Add New Device”.
● If there is no registered device, select “Yes”.
6When this screen is displayed, search
for the device name displayed on the
screen of your Bluetooth
® device.
7Register the Bluetooth® device using
your Bluetooth
® device.
8Check that a confirmation screen is
displayed, indicating pairing was suc-
cessful.
9Check that “Connect ed” is displayed
and registration is complete.
*: The Bluetooth® word mark and logos are register ed trademarks owned by Bluetooth
SIG, Inc.
Hands-free System For Cellular Phone
Registering/connecting Bluetooth® device

70
LC500_LC500h_QG_OM11444U_(U)
1Press the “MENU” button on the Remote Touch.
Please refer to P.58 for the Remote Touch operation.
2Select “Setup”.
3Select “Phone” on the sub menu.
4Select “Contacts/Call History”.
5Select “Transfer Contacts from
Device”.
6Select “From Phone (Bluetooth*)”.
7Transfer the contact data to the system
using a Bluetooth
® phone.
8Check that a confirmation screen is
displayed when the operation is com-
plete.
*: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc.
Contacts transfer
Contacts transfer may not be possible depending on the type of phone.

71
LC500_LC500h_QG_OM11444U_(U)
1Press the “MENU” button on the Remote Touch.
Please refer to P.58 for the Remote Touch operation.
2Select “Setup”.
3Select “Phone” on the sub menu.
4Select “Contacts/Call History”.
5Select “Add Favorite”.
6Select the desired contact to add to the
favorites list.
7Check that a confirmation screen is
displayed when the operation is com-
plete.
1Press the “MENU” button on the Remote Touch.
Please refer to P.58 for the Remote Touch operation.
2Select “Phone”.
3Select “Favorites” on the sub menu and select the desired contact.
4Select the desired number.
5Check that the “Call” screen is displayed.
1Press the “MENU” button on the Remote Touch.
Please refer to P.58 for the Remote Touch operation.
2Select “Phone”.
3Select “Message” on the sub menu.
4Select the desired message.
5Select “Call” or press the switch on the steering wheel.
6Check that the “Call” screen is displayed.
Registering the contacts in the favorites list
Calling by favorites list
Calling the message sender

72
LC500_LC500h_QG_OM11444U_(U)
Select “Answer” or press the switch on the steering wheel to talk on the phone.
To refuse the call: Select “Decline”.Volume control switch
• Press the “+” switch to increase thevolume.
• Press the “-” switch to decrease the volume.
Talk switch
• Press the talk switch to start the voice command system.
• To cancel voice recognition, press and hold the talk switch.
TEL switch
• Start talking
• End talking
• End dialing
Receiving a call
 Main display Side display
Steering switches
A
B
C

73
LC500_LC500h_QG_OM11444U_(U)
Follow the procedure below to display the audio control screen.
Using the audio control switch
Press the “RADIO” or “MEDIA” button.
 Using the Remote Touch
Press the “MENU” button on the Remote Touch, then select “Radio” or “Media”.
Please refer to P.58 for the Remote Touch operation.
 Using the audio control switch
1Display the audio control screen.
2Each time the “RADIO” or “MEDIA”
button is pressed, the audio source
changes.
“RADIO” button: To change radio
modes.
“MEDIA” button: To change media
modes.
 From the audio source selection screen
1Display the audio control screen.
2Select “Source”.
3Select the desired source.
Audio System
Audio control screen
Selecting an audio source

75
LC500_LC500h_QG_OM11444U_(U)
■Audio control switch
Turn to seek up/down
Turn to step up/down frequencies/
channels
Turn to move up/down the list.
■Control screen
Displays cover art
Select to display HD) multicast chan-
nels available
Displays the artist info and song title or
album and genre
Select to tune to preset stations/chan-
nels
Display items on the channels regis-
tered to smart favorites
■Presetting a station
1
Tune in the desired station.
2Select “(add new)”.
3Select “Yes” on the confirmation screen.
4Select “OK” after setting the new preset station.
Radio
A
B
A
B
C
D
E