2018 Lexus LC500 tires

4
-$@-$I@0.@0.&@ &&

TABLE OF CONTENTS
Engine compartment...................318
12-volt battery................................ 325
Tires ................................................... 327
Replacing the tire ......................... 339
Tire inflation pressure................. 345
Wheels.............................................. 346
Air conditioning filter.................. 347
Electronic key battery ................ 349
Checking and replacing fuses 350
Light bulbs ....................................... 355
7-1. Essential information
Emergency flashers..................... 360
If your vehicle has to be stopped in
an emergency............................. 360
7-2. Steps to take in an emergency
If your vehicle needs to be towed
........................................................... 362
If you think something is wrong
........................................................... 366
Fuel pump shut off system
(LC500)....................................... 367
If a warning light turns on or a warn-
ing buzzer sounds..................... 368
If a warning message is displayed
........................................................... 378
If you have a flat tire..................... 384
If the engine will not start (LC500)
........................................................... 385
If the hybrid system will not start
(LC500h) .................................... 386
If you lose your keys .................... 388
If the fuel filler door cannot be
opened .......................................... 388
If the electronic key does not oper-
ate properly ................................. 389
If the 12-volt battery is discharged
........................................................... 392
If your vehicle overheats (LC500)
.......................................................... 400
If your vehicle overheats (LC500h)
.......................................................... 403
If the vehicle becomes stuck ... 407
8-1. Specifications
Maintenance data (fuel, oil level,
etc.) .................................................. 410
Fuel information.............................. 421
8-2. Customization
Customizable features ............... 423
8-3. Items to initialize
Items to initialize ........................... 436
What to do if... (Troubleshooting)
.......................................................... 438
Alphabetical index ....................... 441
Certification ................................... 453
7When trouble arises
8Vehicle specifications
Index

11
-$@-$I@0.@0.&@ &&

Pictorial index
Windshield wipers................................................................................................... P.196
Precautions against winter season.............................................................................. P.271
To prevent freezing (windshield wiper de-icer)*................................................ P.284
Precautions against car wash ...................................................................................... P.305
Fuel filler door ......................................................................................................... P.201
Refueling method ............................................................................................................... P.201
Fuel type/fuel tank capacity ........................................................................................... P.412
Tires .......................................................................................................................... ..P.327
Tire size/inflation pressure ............................................................................................. P.419
Winter tires/tire chains .................................................................................................. P.269
Checking/rotation/tire pressure wa rning system ..............................................P.327
Coping with flat tires ....................................................................................................... P. 384
Hood ........................................................................................................................... P.316
Opening ........................................................................................................................ ......... P.316
Engine oil..................................................................................................................... ........... P.413
Coping with overheating .................................................................................. P.400, 403
Warning messages .......................................................................................................... P.378
Active rear wing*................................................................................................... P.259
Headlights/front position lights/daytime running lights/cornering lightsP.191
Turn signal lights ......................................................................................................P.186
Tail lights .................................................................................................................... .P.191
Stop lights
Emergency brake signal................................................................................................ P.263
License plate lights .................................................................................................. P.191
Rear fog light ............................................................................................................ P.196
Back up light
Shifting the shift lever to R...................................................................................... P.175, 181
*: If equipped
Light bulbs of the exterior lights for driving
(Replacing method: P.355, Watts: P.420)
D
E
F
G
H
I
J
K
L
M

44
-$@-$I@0.@0.&@ &&

1-1. For safe use
●A frontal impact applied to the front bumper while driving at speeds outside of the operational speed range
●A side impact or rear impact
●A vehicle rollover (In some accident situ-ations, the Pop Up Hood may operate.)
WARNING
■When the Pop Up Hood is operated
●Do not pull the hood lock release lever.
Doing so after the Pop Up Hood has operated will further raise the hood and may cause an injury. Do not drive
with the hood raised, as doing so may block the driver’s vision, possibly caus-ing an accident.
●Do not forcibly push down the hood.
As the popped up hood cannot be lowered by hand, doing so may deform the hood or cause an injury.
●If the Pop Up Hood has operated, have
it replaced by any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer. If the Pop Up
Hood has operated, stop the vehicle in a safe place and contact authorized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
●Do not touch the lifters immediately after the Pop Up Hood has operated, as the lifters may be hot and burn you.
NOTICE
■Pop Up Hood precautions
●Make sure to close the hood before driving, as the system may not operate
properly if the hood is not fully closed.
●Make sure that all 4 tires are of the specified size and inflated to the speci-fied tire pressure. If tires of a different
size are used, the system may not operate properly.
●If something has hit the area around the front bumper, the sensors may be
damaged even if the Pop Up Hood has not operated. Have the vehicle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or any reliable repairer.
●Do not remove or repair the parts or wiring of the Pop Up Hood, as doing
so may cause accidental operation or prevent the system from operating properly. If repair or replacement is
necessary, contact any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer.
●Do not remove such components as
the front bumper, hood or suspension, or replace them with non-genuine parts, as doing so may prevent the sys-
tem from operating properly.
●Do not install anything to the front bumper or hood, as doing so may pre-vent the sensors from detecting an
impact correctly and prevent the sys- tem from operating properly.
●Do not close the hood with force or
apply load to the lifters, as doing so may damage the lifters and prevent the system from operating properly.
●Do not modify the suspension, as
changes made to the vehicle height may prevent the system from operat-ing properly.

79
1
-$@-$I@0.@0.&@ &&

1-4. Theft deterrent system
For safety and security
lowing: • Wind or the movement of objects such as leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices such as the intrusion sensors of other vehicles
• The movement of people outside the vehicle
●Unstable items, such as dangling acces-sories or clothes hanging on the coat hooks, are in the vehicle.
●The vehicle is parked in a place where extreme vibrations or noises occur, such
as in a parking garage.
●Ice or snow is removed from the vehicle, causing the vehicle to receive repeated impacts or vibrations.
●The vehicle is inside an automatic or high-pressure car wash.
●The vehicle experiences impacts, such as hail, lightning strikes, and other kinds of repeated impacts or vibrations.
■Tilt sensor detection considerations
The sensor may trigger the alarm in the fol- lowing situations:
●The vehicle is transported by a ferry, trailer, train, etc.
●The vehicle is parked in a parking garage.
●The vehicle is inside a car wash that moves the vehicle.
●Any of the tires loses air pressure.
●The vehicle is jacked up.
●An earthquake occurs or the road caves in.
NOTICE
■To ensure the intrusion sensor func-tion correctly
●To ensure that the sensors operate properly, do not touch or cover them.

154
-$@-$I@0.@0.&@ &&

4-1. Before driving
4-1.Before driving
■Starting the engine tem>
 P.163, 167
■Driving
1 With the brake pedal depressed,
shift the shift position to D. ( P.175,
181)
Check that the shift position indicator shows D.
2 If the parking brake is in manual
mode, release the parking brake.
( P.187)
3 Gradually release the brake pedal
and gently depress the accelerator
pedal to accelerate the vehicle.
■Stopping
1 With the shift position in D, depress
the brake pedal.
2 If necessary, set the parking brake.
If the vehicle is to be stopped for an
extended period of time, shift the shift posi- tion to P. ( P.175, 181)
■Parking the vehicle
1 Stop the vehicle completely.
2 If the parking brake is in manual
mode, set the parking brake.
( P.187)
3 Shift the shift position to P. (P.175,
182)
Check that the shift position indicator shows P.
4 Press the engine switch switch> to stop the engine system>.
5 Slowly release the brake pedal.
6 Lock the door, making sure that you
have the electronic key on your
person.
If parking on a hill, block the wheels as
needed.
■Starting off on a steep uphill
1 Make sure that the parking brake is
set with the brake pedal depressed,
and then shift the shift position to D.
The hill-start assist control will be activated.
( P.262)
2Release the brake pedal and gently
depress the accelerator pedal.
3 Release the parking brake.
■For fuel-efficient driving (LC500h)
Keep in mind that hybrid vehicles are similar
to conventional vehicles, and it is necessary to refrain from activities such as sudden acceleration, etc. Refer to “Hybrid vehicle
driving tips”. ( P.267)
■Driving in the rain
●Drive carefully when it is raining, because
visibility will be reduced, the windows may become fogged-up, and the road will be slippery.
●Drive carefully when it starts to rain, because the road surface will be espe-
cially slippery.
●Refrain from high speeds when driving on
an expressway in the rain, because there may be a layer of water between the tires and the road surface, preventing the
steering and brakes from operating prop- erly.
Driving the vehicle
The following procedures should be
observed to ensure safe driving:
Driving procedure

190
-$@-$I@0.@0.&@ &&

4-2. Driving procedures
in the following conditions:
●The driver’s door is not closed.
●The driver is not wearing the seat belt.
●“EPB Activation Stopped Incompletely” or “EPB Malfunction Visit Your dealer” is displayed on the multi-information dis-
play.
If any of the conditions above are detected
when the brake hold system is enabled, the system will turn off and the brake hold standby indicator light will go off. In addi-
tion, if any of the conditions are detected while the system is holding the brake, a warning buzzer will sound and a message
will be shown on the multi-information dis- play. The parking brake will then be set automatically.
■Brake hold function
●If the brake pedal is left released for a period of about 3 minutes after the sys-
tem has started holding the brake, the parking brake will be set automatically. In this case, a warning buzzer sounds and a
message is shown on the multi-informa- tion display.
●To turn the system off while the system is holding the brake, firmly depress the
brake pedal and press the button again.
●The brake hold function may not hold the
vehicle when the vehicle is on a steep incline. In this situation, it may be neces-sary for the driver to apply the brakes. A
warning buzzer will sound and the multi- information display will inform the driver of this situation. ( P.378)
■When the parking brake is set automati-
cally while the system is holding the brakes
The parking brake will not be released auto- matically. Perform one of the following pro-cedures to release the parking brake and
confirm that the parking brake indicator light turns off. ( P.187)
●With the brake pedal depressed, operate the parking brake switch.
●Fasten your seat belt, check that the shift position is in either D or R and slowly depress the accelerator pedal.
■If “Brake Hold Unavailable” is shown on the multi-information display
The brake hold system cannot be used. The reason the brake hold system is not avail-able (the driver’s door opens, the driver’s
seat belt is unfasten, or the hood or trunk opens) may be displayed. Use the brake hold system when it becomes available.
■Warning message and buzzers
Warning messages and buzzers are used to indicate a system malfunction or to inform
the driver of the need for caution. ( P.378)
WARNING
■When the vehicle is on a steep incline
When using the brake hold system on a
steep incline exercise caution. The brake hold function may not hold the vehicle in such a situation.
■When the vehicle is stopped on a slip-
pery road
The system cannot stop the vehicle when
the gripping ability of the tires has been exceeded. Do not use the system when the vehicle is stopped on a slippery road.
NOTICE
■When parking the vehicle
The brake hold system is not designed for use when parking the vehicle for a
long period of time. Turning the engine switch off while the sys- tem is holding the brake may release the
brake, which would cause the vehicle to move. When operating the engine switch , depress the brake pedal,
set the parking brake and shift the shift position to P.

211
4
-$@-$I@0.@0.&@ &&

4-5. Using the driving support systems
Driving
and the driver is operating the steering
wheel, the LDH system ( P.263) will
control the turning angle of the front
and rear wheels and effort necessary
to turn the steering wheel to help
enhance steering responsiveness.
WARNING
■Limitations of the pre-collision system
●The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings.
Do not use the pre-collision system instead of normal braking operations under any circumstances. This system
will not prevent collisions or lessen col- lision damage or injury in every situa-tion. Do not overly rely on this system.
Failure to do so may lead to an acci- dent, resulting in death or serious injury.
●Although this system is designed to
help avoid a collision or help reduce the impact of the co llision, its effective- ness may change according to various
conditions, therefore the system may not always be able to achieve the same level of performance.
Read the following conditions care- fully. Do not overly rely on this system and always drive carefully.
• Conditions under which the system may operate even if there is no possi-
bility of a collision: P.214
• Conditions under which the system
may not operate properly: P.215
●Do not attempt to test the operation of the pre-collision system yourself, as the system may not operate properly, pos-
sibly leading to an accident.
■Pre-collision braking
●When the pre-collision braking func-
tion is operating, a large amount of braking force will be applied.
●If the vehicle is stopped by the opera-tion of the pre-collision braking func-
tion, the pre-collision braking function operation will be canceled after approximately 2seconds. Depress the
brake pedal as necessary.
●The pre-collision braking function may not operate if certain operations are performed by the driver. If the acceler-
ator pedal is being depressed strongly or the steering wheel is being turned, the system may determine that the
driver is taking evasive action and pos- sibly prevent the pre-collision braking function from operating.
●In some situations, while the pre-colli-
sion braking function is operating, operation of the function may be can-celed if the accelerator pedal is
depressed strongly or the steering wheel is turned and the system deter-mines that the driver is taking evasive
action.
●If the brake pedal is being depressed, the system may determine that the
driver is taking evasive action and pos- sibly delay the operation timing of the pre-collision braking function.
■When to disable the pre-collision sys-
tem
In the following situations, disable the
system, as it may not operate properly, possibly leading to an accident resulting in death or serious injury:
●When the vehicle is being towed
●When transporting the vehicle via
truck, boat, train or similar means of transportation
●When the vehicle is raised on a lift with the engine running operating> and the tires are allowed to rotate freely

212
-$@-$I@0.@0.&@ &&

4-5. Using the driving support systems
■Enabling/disabling the pre-colli-
sion system
The pre-collision system can be
enabled/disabled on ( P.92) of
the multi-information display.
The system is automatically enabled each
time the engine switch is
turned to IGNITION ON mode mode>.
If the system is disabled, the PCS warn-
ing light will turn on and a message will
be displayed on the multi-information
display.
■Changing the pre-collision warn-
ing timing
The pre-collision warning timing can
be changed on ( P.92) of the
multi-information display.
The operation timing setting is retained
when the engine switch is
turned off.
1 Far
The warning will begin to operate earlier
than with the default timing.
WARNING
●When inspecting the vehicle using a drum tester such as a chassis dyna-mometer or speedo meter tester, or
when using an on vehicle wheel bal- ancer
●When a strong impact is applied to the front bumper or front grille, due to an
accident or other reasons
●If the vehicle cannot be driven in a sta- ble manner, such as when the vehicle has been in an accident or is malfunc-
tioning
●When the vehicle is driven in a sporty manner or off-road
●When the tires are not properly inflated
●When the tires are very worn
●When tires of a size other than speci-
fied are installed
●When tire chains are installed
●When a compact spare tire or an emergency tire puncture repair kit is used
●If equipment (snow plow, etc.) that may
obstruct the radar sensor or camera sensor is temporarily installed to the vehicle
Changing settings of the pre-col-
lision safety system