2018 Lexus LC500 remove seats

42
-$@-$I@0.@0.&@ &&

1-1. For safe use
WARNING
●Do not attach anything to areas such as a door, windshield, side window, front or rear pillar and roof side rail.
●Do not hang coat hangers or other hard objects on the coat hooks. All of
these items could become projectiles and may cause death or serious injury, should the SRS curt ain shield airbags
deploy.
●If a vinyl cover is put on the area where the SRS knee airbag will deploy, be sure to remove it.
●Do not use seat accessories which
cover the parts where the SRS side air- bags inflate as they may interfere with inflation of the SRS airbags. Such
accessories may prevent the side air- bags from activating correctly, disable the system or cause the side airbags to
inflate accidentally, resulting in death or serious injury.
●Do not strike or apply significant levels of force to the area of the SRS airbag
components or the doors. Doing so can cause the SRS airbags to malfunction.
●Do not touch any of the component
parts immediately after the SRS air- bags have deployed (inflated) as they may be hot.
●If breathing becomes difficult after the
SRS airbags have deployed, open a door or window to allow fresh air in, or leave the vehicle if it is safe to do so.
Wash off any residue as soon as possi- ble to prevent skin irritation.
●If the areas where the SRS airbags are stored, such as the steering wheel pad
and front and rear pillar garnishes are damaged or cracked, have them replaced by any authorized Lexus
retailer or Lexus authorized repairer, or any reliable repairer.
■Modification and disposal of SRS air-bag system components
Do not dispose of your vehicle or per- form any of the following modifications
without consulting any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer. The SRS airbags
may malfunction or deploy (inflate) acci- dentally, causing death or serious injury.
●Installation, removal, disassembly and repair of the SRS airbags
●Repairs, modifications, removal or
replacement of the steering wheel, instrument panel, dashboard, seats or seat upholstery, front, side and rear pil-
lars, roof side rails, door panels, door trims or door speakers
●Modifications to the door panel (such
as making a hole in it)
●Repairs or modifications of the front fender, front bumper, or side of the occupant compartment
●Installation of a grille guard (bull bars,
kangaroo bar, etc.), snow plows, winches or roof luggage carrier
●Modifications to the vehicle’s suspen-sion system
●Installation of electronic devices such
as mobile two-way radios (RF-trans- mitter) and CD players

51
1
-$@-$I@0.@0.&@ &&

1-2. Child safety
For safety and security
■When installing a child restraint
system to a front passenger seat
For the safety of a child, install child
restraint systems to a rear seats. When
installing child restraint system to a
front passenger seat is unavoidable,
adjust the seat as follows and install the
child restraint system.
 Raise the seatback as much as pos-
sible
 Move the seat to the rearmost posi-
tion
 Raise the seat to the highest position
 If the head restraint interferes with
the child restraint system installa-
tion and the head restraint can be
removed, remove the head restraint.
Otherwise, put the head restraint in
the upper most position.
ISOFIX rigid anchor
attachmentP.57
Anchor brackets (for top
strap) attachmentP.60
Installation methodPage
When using a child restraint sys-
tem
WARNING
■When installing a child restraint sys-
tem
Observe the following precautions.
Failure to do so may result in death or serious injury.

55
1
-$@-$I@0.@0.&@ &&

1-2. Child safety
For safety and security
Key of letters inserted in the above table:
X: Not suitable seat position for children in this mass group.
U: Suitable for “universal” category child restraint systems approved for use in this
mass group.
UF: Suitable for forward-facing “unive rsal” category child restraint systems
approved for use in this mass group.
*1: Adjust the seatback angle to the most upright position. Move the front seat fully rear-
ward. If the passenger seat height can be ad justed, move it to the upper most position.
*2: If the head restraint interferes with your child restraint system, and the head restraint can
be removed, remove the head restraint. Otherwise, put the head restraint in the upper
most position.
 When installing a child restraint in
the rear seats, adjust the front seat
so that it does not interfere with the
child or child restraint system.
 When installing a child seat with
support base, if the child seat inter-
feres with the seatback when latch-
ing it into the support base, adjust
the seatback rearward until there is
no interference.
Mass groups
Seating position
Front passenger seat
Rear seatAirbag manual on-off switch
ONOFF
0
Up to 10 kg
(22 lb.)
XU*1X
0+
Up to 13 kg
(28 lb.)
XU*1X
I
9 to 18 kg
(20 to 39 lb.)
Rearward-facing 
X
U*1, 2XForward-facing 
UF*1, 2
II, III
15 to 36 kg
(34 to 79 lb.)
UF*1, 2U*1, 2X

66
-$@-$I@0.@0.&@ &&

1-3. Hybrid system
■Electromagnetic waves
●High voltage parts and cables on hybrid
vehicles incorporate electromagnetic shielding, and therefore emit approxi-mately the same amount of electromag-
netic waves as conventional gasoline powered vehicles or home electronic appliances.
●Your vehicle may cause sound interfer-ence in some third party-produced radio
parts.
■Hybrid battery (traction battery)
The hybrid battery (traction battery) has a
limited service life. The lifespan of the hybrid battery (traction battery) can change in accordance with driving style and
driving conditions.
■Starting the hybrid system in an extremely cold environment
When the hybrid battery (traction battery) is extremely cold (below approximately -30°C [-22°F]) under the influence of the
outside temperature, it may not be possible to start the hybrid system. In this case, try to start the hybrid system again after the tem-
perature of the hybrid battery increases due to the outside temperature increase etc.
■Declaration of conformity
This model conforms to hydrogen emis- sions according to regulation ECE100
(Battery electric vehicle safety).
WARNING
■High voltage precautions
This vehicle has high voltage DC and AC systems as well as a 12-volt system. DC and AC high voltage is very dangerous
and can cause severe burns and electric shock that may result in death or serious injury.
●Never touch, disasse mble, remove or
replace the high voltage parts, cables or their connectors.
●The hybrid system will become hot after starting as the system uses high
voltage. Be careful of both the high voltage and the high temperature, and always obey the warning labels
attached to the vehicle.
●Never try to open the service plug access hole located behind the rear seats. The service plug is used only
when the vehicle is serviced and is subject to high voltage.
■Road accident cautions
Observe the following precautions to
reduce the risk of death or serious injury:
●Stop the vehicle in a safe place to pre- vent subsequent accidents. While depressing the brake pedal, apply the
parking brake and shift the shift posi- tion to P to stop the hybrid system.
Then, slowly release the brake pedal.
●Do not touch the high voltage parts, cables and connectors.
●If electric wires are exposed inside or outside your vehicle, an electric shock
may occur. Never touch exposed elec- tric wires.

139
3
-$@-$I@0.@0.&@ &&

3-3. Adjusting the seats
Before driving
■Before entering/exiting the rear
seats
 Remove the seat belt from the seat
belt guide. ( P.32)
 Stow the sun visor.
■Entering/exiting the rear seat
1 Pull the lever.
The front seat will lower automatically.
2Fold the seatback completely for-
ward.
The front seat will move forward and the
head restraint will move downward* auto- matically.
*: Power type only
■Returning the front seat to its origi-
nal position
Move the seatback backward until it
locks. The front seat will return to its
original position automatically.
■Lever-operated “Front, Fold & Return” seat
●After the front seat is moved forward by operating the “Front, Fold & Return” seat
lever, if a power seat adjusting switch or a driving position memory switch is pressed, the front seat will not return to its
original position even if the front seatback is moved backward until it locks.
●The lever-operated “Front, Fold & Return” seat will not operate in the follow-
ing situations: • The seat belt of the seat to be operated is fastened.
• The engine switch is in IGNITION ON mode and the shift position is in a position other than
P.
●Operation of the lever-operated “Front,
Fold & Return” seat will stop in the follow- ing situations:• A power seat adjusting switch or a driv-
ing position memory switch is pressed. • The seat belt of the seat which is operat-ing is fastened.
• The engine switch is in IGNITION ON mode and the shift position is changed to a position
other than P.
■Jam protection function
While the driving positi on is recalling or the
lever-operated “Front, Fold & Return” seat is operating, if an object is stuck either in front of or behind the front seat, the front
seat will stop and then move in the opposite direction slightly.
When the jam protection function operates, the seat stops at a po sition other than the set seat position. Check the seat position.
Entering/exiting the rear seats
(lever-operated “Front, Fold &
Return” seat)

143
3
-$@-$I@0.@0.&@ &&

3-3. Adjusting the seats
Before driving
Manual type
1 Up
Pull the head restraints up.
2Down
Push the head restraint down while press-
ing the lock release button .
Power type
1 Up
2 Down
■Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Pull the head restraint up while press-
ing the lock release button .
If the head restraint touches the ceiling,
making the removal difficult, change
the seat height or angle. ( P.138)
Head restraints
Head restraints are provided for
front seats.
WARNING
■Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious
injury.
●Adjust the head restraints to the cor- rect position at all times.
●Manual type: After adjusting the head restraints, push down on them and
make sure they are locked in position.
●Manual type: Do not drive with the head restraints removed.
Vertical adjustment
A
Removing the head restraints
(manual type only)
A

308
-$@-$I@0.@0.&@ &&

6-1. Maintenance and care
■CFRP (Carbon Fiber Reinforced Plas- tic) parts (if equipped)
CFRP is used for the scuff plates. When cleaning the scuff plates, remove dirt using a water-dampened soft cloth or synthetic
chamois, and then wipe the surface with a dry soft cloth to remove any remaining moisture.
WARNING
■Water in the vehicle
●LC500: Do not splash or spill liquid in the vehicle.Doing so may cause electrical compo-
nents etc. to malfunction or catch fire. LC500h: Do not splash or spill liquid in the vehicle, such as on the floor, on
the rear seats, in the hybrid battery (traction battery) air vents or in the trunk. ( P.68)
Doing so may cause the hybrid battery, electrical components, etc. to mal-function or catch fire.
●Do not get any of the SRS components
or wiring in the vehicle interior wet. ( P.35) An electrical malfunction may cause
the airbags to deploy or not function properly, resulting in death or serious injury.
■Cleaning the interior (especially
instrument panel)
Do not use polish wax or polish cleaner.
The instrument panel may reflect off the windshield, obstructing the driver’s view and leading to an accident, resulting in
death or serious injury.
NOTICE
■Cleaning detergents
●Do not use the following types of
detergent, as they may discolor the vehicle interior or cause streaks or damage to painted surfaces:
• Non-seat portions: Organic sub- stances such as benzene or gasoline,
alkaline or acidic solutions, dye, and bleach
• Seats: Alkaline or acidic solutions, such as thinner, benzene, and alcohol
●Do not use polish wax or polish cleaner. The instrument panel’s or
other interior part’s painted surface may be damaged.
■Preventing damage to leather sur-faces
Observe the following precautions to avoid damage to and deterioration of
leather surfaces:
●Remove any dust or dirt from leather surfaces immediately.
●Do not expose the vehicle to direct sunlight for extended periods of time.
Park the vehicle in the shade, espe- cially during summer.
●Do not place items made of vinyl, plas-tic, or containing wax on the uphol-
stery, as they may stick to the leather surface if the vehicle interior heats up significantly.
■Water on the floor
Do not wash the vehicle floor with water. Vehicle systems such as the audio system
may be damaged if water comes into contact with electrical components such as the audio system above or under the
floor of the vehicle. Water may also cause the body to rust.