2018 Lexus LC500 change time

140
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Displays cover art
Select to set repeat playback.
( P.140)
Select to select a track.
Select and hold to fast rewind.
Select to play/pause.
Select to select a track.
Select and hold to fast forward.
Select to set random playback.
( P.140)
The track or album currently being lis-
tened to can be repeated.
1 Select .
●Each time is selected, the mode
changes as follows:
• track repeat  album repeat  off
Tracks or albums can be automatically
and randomly selected.
1 Select .
●Each time is selected, the mode
changes as follows:
•album random  all track random  off
Turn to select a track.
Turn and hold to fast for-
ward/rewind.
Turn to select a track.
Turn to move up/down the list.
●Depending on the Bluetooth® device that is connected to the system, the music
may start playing when selecting
while it is paused. Conversely, the music
may pause when selecting while it is
playing.
●In the following conditions, the system may not function:
• The Bluetooth® device is turned off.
• The Bluetooth® device is not connected.
• The Bluetooth® device has a low battery.
●It may take time to connect the phone
when Bluetooth® audio is being played.
●For operating the portable player, see the instruction manual that comes with it.
●If the Bluetooth® device is disconnected due to poor reception from the
Bluetooth® network when the engine switch is in ACCES-
Control screen
Repeating
Random order
A
B
C
D
E
F
Audio control switch
A
B

154
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
4-6.Tips for operating the audio/visual system
●The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio/visual system
which you are listening to. However, this does not indicate a malfunction.
Usually, a problem with radio reception
does not mean there is a problem with
the radio  it is just the normal result
of conditions outside the vehicle.
For example, nearby buildings and ter-
rain can interfere with FM reception.
Power lines or phone wires can inter-
fere with AM signals. And of course,
radio signals have a limited range. The
farther the vehicle is from a station, the
weaker its signal will be. In addition,
reception conditions change con-
stantly as the vehicle moves.
Here, some common reception prob-
lems that probably do not indicate a
problem with the radio are described.
■FM
Fading and drifting stations: Generally,
the effective range of FM is about 40
km (25 miles). Once outside this
range, you may notice fading and drift-
ing, which increase with the distance
from the radio transmitter. They are
often accompanied by distortion.
Multi-path: FM signals are reflective,
making it possible for 2 signals to reach
the vehicle’s antenna at the same time.
If this happens, the signals will cancel
each other out, causing a momentary
flutter or loss of reception.
Static and fluttering: These occur when
signals are blocked by buildings, trees
or other large objects. Increasing the
bass level may reduce static and flut-
tering.
Station swapping: If the FM signal
being listened to is interrupted or
weakened, and there is another strong
station nearby on the FM band, the
radio may tune in the second station
until the original signal can be picked
up again.
■AM
Fading: AM broadcasts are reflected
by the upper atmosphere  especially
at night. These reflected signals can
interfere with those received directly
from the radio station, causing the
radio station to sound alternately
strong and weak.
Station interference: When a reflected
signal and a signal received directly
from a radio station are very nearly the
same frequency, they can interfere with
each other, making it difficult to hear
the broadcast.
Static: AM is easily affected by external
sources of electrical noise, such as high
Operating information
NOTICE
●To avoid damage to the audio/visual
system:
• Be careful not to spill beverages over
the audio/visual system.
• Do not put anything other than an
appropriate disc into the disc slot.
Radio

178
-$@-$I@/BWJ@0.&@ &&

6-1. Lexus parking assist monitor
Distance guide line display mode
Distance guide lines only are dis-
played.
1 Press the touchpad when the park-
ing assist monitor screen is dis-
played.
Display mode switch screen button
• Every time the touchpad is pressed, the
display mode changes in the following
order: estimated course line display
mode  parking assist guide line display
mode  distance guide line display
mode.
Vehicle width guide line
Displays a guide path when the vehicle is
being backed straight up.
• The displayed width is wider than the
actual vehicle width.
• These guide lines align with the esti-
mated course lines when the vehicle is
going straight ahead.
Estimated course lines
Show an estimated course when the steer-
ing wheel is turned.
Distance guide lines
Show distance behind the vehicle when the
steering wheel is turned.
• The guide lines move in conjunction with
the estimated course lines.
• The guide lines display points approxi-
mately 0.5 m (1.5 ft.) (red) and approxi-
mately 1 m (3 ft.) (yellow) from the
center of the edge of the bumper.
Distance guide line
Shows distance behind the vehicle.
• Displays a point approximately 0.5 m
(1.5 ft.) (blue) from the edge of the
bumper.
Switching the display mode
A
Estimated course line display
mode
Screen description
A
B
C
D

215
7
-$@-$I@/BWJ@0.&@ &&

7-3. What to do if...
Phone
system to on. (P.206)
■Notification of SMS/MMS/E-mail
reception on this system is set to
off.
Set notification of SMS/MMS/E-mail
reception on this system to on.
( P.205)
■Automatic message transfer func-
tion is not enabled on the cellular
phone.
Enable automatic transfer function on
the cellular phone.
■Connection confirmation display
on this system is set to on.
To turn off the display, set connection
confirmation display on this system to
off. ( P.50)
*: The engine switch is in
ACCESSORY or IGNITION ON
mode .
■The cellular phone is not close
enough to this system.
Bring the cellular phone closer to this
system.
■Radio interference has occurred.
Turn off Wi-Fi® devices or other
devices that may emit radio waves.
■The cellular phone is the most likely
cause of the symptom.
Turn the cellular phone off, remove and
reinstall the battery pack, and then
restart the cellular phone.
Enable the cellular phone’s Bluetooth®
connection.
Disable the Wi-Fi® connection of the
cellular phone.
Stop the cellular phone’s security soft-
ware and close all applications.
Before using an application installed on
the cellular phone, carefully check its
source and how its operation might
affect this system.
●For details, refer to the owner’s manual that came with the cellular phone.
New message notifications are not
displayed.
In other situations
The Bluetooth® connection status is
displayed at the top of the screen
each time the system is activated.*
Even though all conceivable mea-
sures have been taken, the symptom
status does not change.

225
8
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Connected services
●This function is not available while driving.
1Display the start route guidance
screen. ( P.90)
2 Select weather icon.
3 Check that the “Weather” screen is
displayed.
“Location”: Select to change the location of
weather information. ( P.225)
“Forecast”: Select to display the weather
forecast for the next 5 days.
“Current”: Select to display the weather for
current time.
: Select to update the weather infor-
mation.
1 Display the start route guidance
screen. ( P.90)
2 Select weather icon.
3 Check that the “Weather” screen is
displayed.
4 Select “Location”.
5 Select the desired item to search
for a point.
“At destination”: Select to set a location by using a current destination.
“Current location”: Select to set a location by using the current position.
Weather
Weather information for a desired
location can be displayed, provided
the system is connected to the
internet. ( P.221)
Displaying the weather screen
Changing location