2018 Lexus LC500 navigation system

38
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Linking multi-information
display and navigation sys-
tem
The following functions of the navi-
gation system are linked with the
multi-information display in the
instrument cluster:
 Navigation
 Audio
 Phone
etc.
These functions can be operated
using the meter control switches on
the steering wheel. For details,
refer to “OWNER’S MANUAL”.

39
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
2-2.Network settings
■Registering from navigation sys-
tem
1 Turn the Bluetooth® connection
setting of your cellular phone on.
 This function is not available when
Bluetooth® connection setting of
your cellular phone is set to off.
2 Press the “MENU” button on the
Remote Touch.
3 Select “Setup”.
4 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
 When there is no registered device,
operations up to this point can also
be performed by pressing the
switch on the steering wheel.
5 Depending on situation, different
screen is displayed.
 If there is a registered device, select
“Add new device”.
 If there is no registered device,
select “Yes”.
6 When this screen is displayed,
search for the device name dis-
played on the screen of your
Bluetooth® device.
 For details about operating the
Bluetooth® device, see the manual
that comes with it.
 Depending on the type of
Bluetooth® phone or portable
device, if you do not enable the dis-
play of certain screens, your device
may not be displayed on the device
list. Refer to the instruction manual
Registering/Connecting
Bluetooth® device
To use the hands-free system, it is
necessary to register a Bluetooth®
phone with the system.
Once the phone has been regis-
tered, it is possible to use the hands-
free system.
This operation cannot be per-
formed while driving.
Registering a Bluetooth® phone
for the first time

40
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
included with the Bluetooth® phone
or portable device for more details.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
■Registering from phone
When registering from the navigation
system is failed, or the phone name
doesn’t appear on the registering
screen, you need to connect the
Bluetooth® phone manually.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Yes” to register the new
phone.
5 Press the button on the Remote
Touch to select “If you cannot find…”
on the bottom of the screen.

59
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
(P.59)
Select to adjust the screen display.
( P.59)
Select to adjust the camera display.
( P.59)
Depending on the position of the head-
light switch, the screen changes to day
or night mode. This feature is available
when the headlight is switched on.
1 Select “Day mode”.
●If the screen is set to day mode with the headlight switch turned on, this condition is memorized even with the engine
turned off.
The contrast and brightness of the
screen can be adjusted according to
the brightness of your surroundings.
1 Select “General” or “Camera”.
2 Select the desired item.
 “Display (General)” screen only:
Select or to select the
desired display.
•“Contrast”
“+”: Select to strengthen the contrast of the
screen.
“-”: Select to weaken the contrast of the
screen.
• “Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
Registered or changed personal set-
tings will be deleted or returned to
their default conditions.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Delete personal data”.
4 Select “Delete”.
5 Select “Yes” when the confirmation
screen appears.
Examples of settings that can be returned to their default conditions:
 General settings
 Navigation settings
 Audio settings
 Phone settings
 Connected service settings
etc.
Changing between day and night
mode
Adjusting the contrast/brightness
C
D
Deleting personal data

3
63
-$@-$I@/BWJ@0.&@ &&

3
Navigation system
Navigation system
3-1. Basic operation
Quick reference ............................ 64
Map screen operation ............... 69
Map screen information.............. 71
Traffic messages ............................ 76
3-2. Destination search
Search operation .......................... 79
3-3. Route guidance
Starting route guidance............. 90
Route guidance............................. 93
Editing route................................... 95
3-4. Favourite destinations
Registering an entry................... 101
Editing the entry information. 103
3-5. Setup
Map settings................................. 106
Traffic message settings ........... 110
Route preferences settings..... 113
3-6. Tips for the navigation system
GPS (Global Positioning System)
.......................................................... 115
Navigation database updates 117
For vehicles sold outside Europe, some of the functions cannot be operated
while driving.

65
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
A short while later after the following methods, the display automatically switches
to map screen:
 Press the “MAP” button on the Remote Touch.
 Press the “MENU” button on the Remote Touch, then select “Destination” on
the “Menu” screen.
■After calculating a route to a new destination
Select to zoom in/out the map scale. ( P.70)
Displays the distance to the next turn with the arrow indicating the turn direc-
tion. When the arrow icon is selected, the last navigation announcement will be
repeated.
Displays information about the destination, such as estimated arrival time,
remaining travel time, distance, and traffic prediction information.
• Each time this area is selected, the inform ation will change between the arrival time and
remaining travel time to the destination.
Displays traffic events on the route.
• The remaining length and the re maining delay time are displayed.
Displays the name of the current street or the next street.
Map screen
A
B
C
D
E

67
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
■During route guidance operation
Select to pause or resume route guidance.
Select to display the traffic messages. It displays a list of traffic messages relat-
ing to the set route, all traffic messages, and warnings. ( P.76)
Select to display fuel station information. The location and fuel price can also be
checked. ( P.227)
Select to display parking lot information. The location, price and available
spaces of parking lots can be checked. ( P.226)
Select to display the route information screen. Route options for the route cal-
culations can be selected. ( P.95)
A
B
C
D
E

69
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
1Press the “MAP” button on the
Remote Touch.
2 Select “Continue”.
 After about a few seconds, the cau-
tion screen automatically switches
to the map screen.
When starting the navigation system,
the current position is displayed first.
This screen displays the current vehicle
position and a map of the surrounding
area.
1 A short while later after the select-
ing “MAP” button on the Remote
Touch, the display automatically
switches to map screen.
 The current vehicle position mark
appears in the centre of the map
screen.
●While driving, the current vehicle posi- tion mark is fixed on the screen and the map moves.
●The current position is automatically set as the vehicle receives signals from the
GPS (Global Positioning System). If the current position is not correct, it is auto-matically corrected after the vehicle
receives signals from the GPS.
●After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives
signals from the GPS, the correct current position is displayed.
Use the scroll feature to move the
desired point to the center of the
screen for looking at a point on the
map screen that is different from the
current position.
1 Select the desired point on the map
screen.
 Move the desired point on the cen-
ter of the map screen.
 After the screen is scrolled, it is pos-
sible to do the drag or flick opera-
tion on the touchpad.
Map screen operation
Displaying map screen
Current vehicle position display
Screen scroll operation