2018 KIA STONIC USB port

INSTRUMENT PANEL OVERVIEW
0:#
1. Instrument cluster.......................... .......................... p. 4-45
2. Horn...................................... ...................................... p. 4-39
3. Driver’s front air bag........................ ........................ p. 3-46
4. Light control............................... ............................... p. 4-81Turn signals................................ ................................ p. 4-84
5. Wiper/Washer.............................. .............................. p. 4-90
6. Ignition switch.............................. .............................. p. 6-06 ENGINE START/STOP button................. ................. p. 6-10
7. Hazard warning flasher switch............... ............... p. 7-02
8. Audio
9. Central door lock switch..................... ..................... p. 4-18
10. Climate control system............... ............... p. 4-99, 4-108
11. AUX-USB port.............................. .............................. p. 5-03
12. Shift lever............................ ............................ p. 6-20, 6-24
13. Parking brake lever.................................................... p. 6-31
14. Passenger’s front air bag.................... .................... p. 3-46
15. Power outlet.............................. .............................. p. 4-129
16. Glove box................................. ................................. p. 4-122
17. Steering wheel audio remote control
18. Cigarette lighter........................... ........................... p. 4-126
19. Seat warmer.............................. .............................. p. 4-128
20. Heated steering wheel switch................ ................ p. 4-39
21. Idle Stop and Go system OFF button.......... .......... p. 6-16
22. USB charger.............................................................. p. 4-130

2-05
2
Your vehicle at a glance

CAUTION
•Use the power outlet only whenthe engine is running and removethe accessory plug after use. Usingthe accessory plug for prolongedperiods of time with the engine offcould cause the battery to dis‐charge.
•Only use 12V electric accessorieswhich are less than 10A in electriccapacity.
•Adjust the air-conditioner or heat‐er to the lowest operating levelwhen using the power outlet.
•Close the cover when not in use.
•Some electronic devices can causeelectronic interference when plug‐ged into a vehicle’s power outlet.These devices may cause exces‐sive audio static and malfunctionsin other electronic systems or de‐vices used in your vehicle.
•Using electrical products which ex‐ceed the limited capacity mightcause heating to the power outletand wiring that could lead to anelectrical breakdown.
(Continued)
(Continued)
•Always make sure the electricalpart is firmly plugged into thepower outlet. Incomplete pluggingmay cause electrical breakdown.
•Electrical products with a built-inbattery might cause current flow,which could lead to malfunction ofthe electric/ electronic device inyour vehicle. Only use electricalproducts which include reversecurrent prevention.
WARNING
Do not put a finger or a foreign ele‐ment (pin, etc.) into a power outletand do not touch with a wet hand.You may get an electric shock.
USB charger (if equipped)
The USB charger is designed to re‐
charge batteries of small size electrical devices using a USB cable. The electrical
devices can be recharged when the En‐
gine Start/Stop button is in ACC/ON/ START position.
The battery charging state may be
monitored on the electrical device.
Disconnect the USB cable from the USB
port after use. • Some devices are not supported for fast charging but will be charged withnormal speed.
• Use the USB charger when the engine is running to prevent battery dis‐
charge.
Features of your vehicle
4-130

• Only devices that fits the USB portcan be used.
• The USB charger can be used only for battery charging purposes.
• Battery chargers cannot be charged.
Floor mat anchor(s) (if
equipped)
0:#
When using a floor mat on the front
floor carpet, make sure it attaches to the floor mat anchor(s) in your vehicle.
This keeps the floor mat from sliding
forward.
WARNING
The following must be observedwhen installing ANY floor mat to thevehicle.•Ensure that the floor mats are se‐curely attached to the vehicle'sfloor mat anchor(s) before drivingthe vehicle.
•Do not use ANY floor mat thatcannot be firmly attached to thevehicle's floor mat anchors.
•Do not stack floor mats on top ofone another (e.g. all-weather rub‐ber mat on top of a carpeted floormat). Only a single floor matshould be installed in each position.
IMPORTANT - Your vehicle was man‐ufactured with driver's side floormat anchors that are designed tosecurely hold the floor mat in place.To avoid any interference with pedaloperation, Kia recommends that onlythe Kia floor mat designed for use inyour vehicle be installed.
Shopping bag holder
CAUTION
•Do not hang a bag weighing morethan 3 kg (7 lbs.). It may causedamage to the shopping bag hold‐er.
•Do not hang the frail objects whenyou drive rough road, the objectsmay be damaged.

4-131
4
Features of your vehicle

Audio system............................................................................. 5-02Antenna.................................................................................. 5-02
AUX, USB port ....................................................................... 5-03
How vehicle audio works......................................................5-03
Audio system

5

AUX, USB port (if equipped)
You can use the AUX port to connect
audio devices and the USB port to plug
in a USB device or iPod ®
.
NOTICE
When using a portable audio device
connected to the power outlet, noise
may occur during playback. If this
happens, use the power source of
the portable audio device.
❈ iPod ®
is a trademark of Apple Inc.
How vehicle audio works
'.
SFDFQUJPO*0/041)&3&
AM and FM radio signals are broadcast
from transmitter towers located around your city. They are intercepted
by the radio antenna on your vehicle.
This signal is then received by the radio and sent to your vehicle speakers.
When a strong radio signal has reached
your vehicle, the precise engineering of
your audio system ensures the best possible quality reproduction. However,
in some cases the signal coming to your
vehicle may not be strong and clear.
This can be due to factors, such as the
distance from the radio station, close‐ ness of other strong radio stations or
the presence of buildings, bridges or
other large obstructions in the area.
".
SFDFQUJPO
*0/041)&3&
AM broadcasts can be received at
greater distances than FM broadcasts. This is because AM radio waves are
transmitted at low frequencies. These
long, low frequency radio waves can follow the curvature of the earth rath‐
er than travelling straight out into the
atmosphere. In addition, they curve around obstructions so that they can
provide better signal coverage.

5-03
5
Audio system