Rear turn signal lamp bulb
replacement
0 : # #
1. Open the tail gate.
2. Loosen the light assembly retainingscrews with a cross-tip screwdriv‐
er.
0 : # #
3. Remove the rear combination lamp assembly from the body of the ve‐
hicle.
4. Disconnect the rear combination lamp connector.
0 : # #
5. Remove the socket from the as‐sembly by turning the socket coun‐
terclockwise until the tabs on the
socket align with the slots on the
assembly.
6. Remove the bulb from the socket by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the socket. Pull the bulb out of the
socket.
7. Insert a new bulb by inserting it in‐ to the socket and rotating it until it
locks into place.
8. Install the socket in the assembly by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
9. Install the rear combination lamp assembly to the body of the vehi‐
cle.
Maintenance
8-114
BULB WATTAGE
Light BulbWattageBulb type
Front Head lamp
Low
Standard 55W H4LL
Option *
60W 9005 HL+
High Standard 55W H4LL
Option *
60W 9005 HL+
Static bending light *
55W H7LL
Daytime running light *
21W or LED P21WLL or LED
Position lamp 55W or LED W5W LL or LED
Turn signal lamp 21W PY21W LL
Front fog lamp *
51W HB4
Rear Tail lamp
Inside 5W or LED W5W LL or LED
Outside 5W or LED P21/5W LL or LED
Stop lamp Inside LED LED
Outside 21W or LED P21/5W LL or LED
Turn signal lamp 21W PY21W LL
Back up lamp 16W W16W
Rear fog light *
21W or LED P21W LL or LED
High mounted stop lamp 5W X 4EA W5W LL
License plate lamp 5W X 2EA W5W LL
* If equipped
Specifications & Consumer information
9-04
