2018 KIA STONIC air condition

User Settings Mode (for type C, D cluster)...................... 4-59
Warning messages................................................................4-61
Warning and indicator lights................................................... 4-65 Warning lights........................................................................ 4-65
Indicator Lights...................................................................... 4-72
Rear parking assist system ....................................................4-76 Operation of the rear parking assist system................... 4-76
Non-operational conditions of rear parking as‐
sist system.............................................................................4-77
Rear parking assist system precautions...........................4-77
Self-diagnosis........................................................................ 4-78
Rearview camera ..................................................................... 4-79
Lighting....................................................................................... 4-80 Battery saver function......................................................... 4-80
Headlight escort function ................................................... 4-80
Headlight welcome function .............................................. 4-80
Lighting control..................................................................... 4-81
High beam operation............................................................ 4-83
Turn signals and lane change signals.................................4-84
Front fog light .......................................................................4-85
Rear fog light ........................................................................ 4-86
Static bending light .............................................................. 4-86
Daytime running light ......................................................... 4-87
Headlight leveling device ..................................................... 4-87
High beam Assist ................................................................. 4-88
Wipers and washers................................................................. 4-90 Windshield wipers (front).................................................... 4-90
Windshield washers (front)................................................. 4-92
Rear window wiper and washer switch ........................... 4-93
Interior light............................................................................... 4-95 Map lamp................................................................................ 4-95
Room lamp............................................................................. 4-96
Luggage room lamp ............................................................. 4-96
Vanity mirror lamp .............................................................. 4-96
Glove box lamp...................................................................... 4-97
Defroster.................................................................................... 4-98 Rear window defroster........................................................ 4-98
Manual climate control system ............................................. 4-99 Heating and air conditioning............................................. 4-100
System operation............................................................... 4-104
Climate control air filter ................................................... 4-106
Air Conditioning refrigerant label..................................... 4-106
Checking the amount of air conditioner refriger‐
ant and compressor lubricant...........................................4-107
Automatic climate control system ..................................... 4-108 Automatic heating and air conditioning.......................... 4-109
Manual heating and air conditioning............................... 4-110
System operation............................................................... 4-114
Climate control air filter ................................................... 4-116
Air Conditioning refrigerant label..................................... 4-116
Checking the amount of air conditioner refriger‐
ant and compressor lubricant...........................................4-117
Windshield defrosting and defogging..................................4-118 Manual climate control system........................................ 4-118
Automatic climate control system.................................. 4-119
Defogging logic ................................................................... 4-119
Storage compartments......................................................... 4-122 Center console storage .....................................................4-122
Glove box.............................................................................. 4-122
Sunglass holder .................................................................. 4-123


4

Non-operational conditions of
rear parking assist system
The rear parking assist systemmay not operate properly when:
1. Moisture is frozen to the sensor. (Itwill operate normally when the
moisture has been cleared.)
2. The sensor is covered with foreign matter, such as snow or water, or
the sensor cover is blocked. (It will
operate normally when the materi‐
al is removed or the sensor is no
longer blocked.)
3. Driving on uneven road surfaces (unpaved roads, gravel, bumps, gra‐ dient).
4. Objects generating excessive noise (vehicle horns, loud motorcycle en‐
gines, or truck air brakes) are with‐
in range of the sensor.
5. Heavy rain or water spray exists.
6. Wireless transmitters or mobile phones are within range of the
sensor.
7. The sensor is covered with snow.
8. Trailer towing.
The detecting range may decreasewhen:
1. The sensor is stained with foreign matter such as snow or water. (The
sensing range will return to normal
when removed.)
2. Outside air temperature is ex‐ tremely hot or cold.
The following objects may not berecognized by the sensor:
1. Sharp or slim objects such as ropes,chains or small poles.
2. Objects which tend to absorb the sensor frequency such as clothes,
spongy material or snow.
3. Undetectable objects smaller than 1 m (40 in.) in height and narrower
than 14 cm (6 in.) in diameter.
Rear parking assist system
precautions
• The rear parking assist system may not sound consistently depending on
the speed and shapes of the objects detected. • The rear parking assist system may
malfunction if the vehicle bumper
height or sensor installation has been
modified or damaged. Any non-fac‐
tory installed equipment or accesso‐ ries may also interfere with the sen‐
sor performance.
• The sensor may not recognize ob‐ jects less than 30 cm (12 in.) from
the sensor, or it may sense an incor‐
rect distance. Use caution.
• When the sensor is frozen or stained with snow, dirt, or water, the sensor
may be inoperative until the stains
are removed using a soft cloth.
• Do not push, scratch or strike the sensor. Sensor damage could occur.
NOTICE
This system can only sense objects
within the range and location of the
sensors; It can not detect objects in
other areas where sensors are not
installed. Also, small or slim objects,
such as poles or objects located be‐
(Continued)

4-77
4
Features of your vehicle

(Continued)
•When it is hard to see because offog, heavy rain or snow.
•When the headlamp is not repairedor replaced at an authorized deal‐er.
•When headlamp aiming is notproperly adjusted.
•When driving on a narrow curvedroad or rough road.
•When driving downhill or uphill.
•When only part of the vehicle infront is visible on a crossroad orcurved road.
•When there is a traffic light, re‐flecting sign, flashing sign or mir‐ror.
•When the road conditions are badsuch as being wet or covered withsnow.
•When the front vehicle’s head‐lamps are off but the fog lampson.
•When a vehicle suddenly appearsfrom a curve.
(Continued)
(Continued)
•When the vehicle is tilted from aflat tire or being towed.
•When the LDWS (lane departurewarning system) or LKAS (lanekeeping assist system) warninglight illuminates. (if equipped)
WARNING
•Do not place any accessories,stickers or tint the windshield.
•Have the windshield glass replacedfrom an authorized dealer.
•Do not remove or impact relatedparts of the High Beam Assist sys‐tem.
•Be careful that water doesn’t getinto the High Beam Assist unit.
•Do not place objects on the dash‐board that reflects light such asmirrors, white paper, etc. The sys‐tem may malfunction if sunlight isreflected.
(Continued)
(Continued)
•At times, the High Beam Assistsystem may not work properly, al‐ways check the road conditions foryour safety. When the systemdoes not operate normally, man‐ually change between the highbeam and low beam.

4-89
4
Features of your vehicle

MANUAL CLIMATE CONTROL SYSTEM (IF EQUIPPED)
1. Fan speed control knob
2. Mode selection knob
3. Temperature control knob
4. Air conditioning button (if equipped)
5. Rear window defroster button
6. Air intake control button
CAUTION
Operating the blower when the igni‐tion switch is in the ON positioncould cause the battery to discharge.Operate the blower when the engineis running.

4-99
4
Features of your vehicle

Heating and air conditioning1. Start the engine.
2. Set the mode to the desired posi‐tion.
For improving the effectiveness of
heating and cooling; - Heating:
- Cooling:
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning (if equipped)
system on.
Features of your vehicle
4-100

Temperature control
The temperature control knob allows
you to control the temperature of the air flowing from the ventilation system.
To change the air temperature in the
passenger compartment, turn the knob to the right position for warm and hot
air or left position for cooler air.
Air intake control
The air intake control is used to select
the outside (fresh) air position or recir‐ culated air position.
To change the air intake control posi‐
tion, press the control button.
Recirculated air position
With the recirculated air position selected, airfrom the passenger
compartment will bedrawn through the heat‐ing system and heated
or cooled according tothe function selected.
Outside (fresh) air position
With the outside (fresh) air position selected, air
enters the vehicle fromoutside and is heated or
cooled according to thefunction selected.
NOTICE
Prolonged operation of the heater in
the recirculated air position (without
air conditioning selected) may cause
fogging of the windshield and side
windows and the air within the pas‐
senger compartment may become
stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in exces‐
sively dry air in the passenger com‐
partment.
Features of your vehicle
4-102

WARNING
•Continue using the climate controlsystem in the recirculated air posi‐tion may allow humidity to in‐crease inside the vehicle whichmay fog the glass and obscure vis‐ibility.
•Do not sleep in a vehicle with theair conditioning or heating systemon. It may cause serious harm ordeath due to a drop in the oxygenlevel and/or body temperature.
•Continue using the climate controlsystem in the recirculated air posi‐tion can cause drowsiness orsleepiness, and loss of vehicle con‐trol. Set the air intake control tothe outside (fresh) air position asmuch as possible while driving.
Fan speed control
The ignition switch must be in the ON
position for fan operation.
The fan speed control knob allows you to control the fan speed of the air flow‐
ing from the ventilation system. To
change the fan speed, turn the knob to
the right for higher speed or left for lower speed.
Setting the fan speed control knob to
the L

Air conditioning (A/C)
Press the A/C button to turn the air
conditioning system on (indicator light will illuminate). Press the button again
to turn the air conditioning system off.
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system (if
equipped) on.
• If the windshield fogs up, set the mode to the
or position.
Operation Tips
• To keep dust or unpleasant fumes from entering the vehicle through the
ventilation system, temporarily set the air intake control to the recircula‐
ted air position. Be sure to return the
control to the fresh air position when
the irritation has passed to keep
fresh air in the vehicle. This will help the driver to stay alert and comfort‐
able. • Air for the heating/cooling system is
drawn in through the grilles just
ahead of the windshield. Care should
be taken that these are not blocked by leaves, snow, ice or other obstruc‐
tions.
• To prevent interior fog on the wind‐ shield, set the air intake control to
the fresh air position and fan speed to the desired position, turn on the
air conditioning system, and adjust
the temperature control to the de‐
sired temperature.
Air conditioning
Kia Air Conditioning Systems are filled
with environmentally friendly refriger‐
ant *
.
1. Start the engine. Push the air con‐ ditioning button.
2. Set the mode to the
position.
* Your vehicle is filled with R-134a or
R-1234yf according to the regula‐tion in your country at the time of
producing. You can find out which air
conditioning refrigerant is applied
your vehicle at the label inside of en‐
gine room. Refer to L