2018 KIA FORTE 5 headlight bulb

Features of your vehicle
98
4
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec-
tion in the circuit.One-touch lane change function
To activate an one-touch lane
change function, move the turn sig-
nal lever slightly and then release it.
The lane change signals will blink 3,
5 or 7 times.
You can choose one-touch lane
change blinking function in "One
touch turn lamp" of "User setting".
Refer to "User setting" in chapter 4.
✽ ✽
NOTICE
If an indicator flash is abnormally
quick or slow, the bulb may be
burned out or have a poor electrical
connection in the circuit.
Front fog light (if equipped)
Fog lights are used to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc. The
fog lights will turn on when the fog light
switch (1) is turned to the on position
after the headlights are turned on.
To turn off the fog lights, turn the
switch (1) to the off position.
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
OAM049046N
YDM CAN (ENG) 4a.QXP 5/12/2017 3:33 PM Page 98

Maintenance
80
7
LIGHT BULBS
Use only the bulbs of the specified
wattage.
If you don’t have necessary tools, the
correct bulbs and the expertise, con-
sult an authorized Kia dealer. In
many cases, it is difficult to replace
vehicle light bulbs because other
parts of the vehicle must be removed
before you can get to the bulb. This is
especially true if you have to remove
the headlight assembly to get to the
bulb(s). Removing/installing the
headlight assembly can result in
damage to the vehicle.Front lights replacement
(1) Headlight (High)/Daytime running light (DRL)
(2) Headlight (Low)
(3) Front turn signal light
(4) Front fog light*
(5) Front position light*
(6) Side marker
* : if equipped
WARNING - Lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the “LOCK” position
and turn off the lights to avoid
burning your fingers or receiv-
ing an electric shock.
CAUTION - Light replacement
Be sure to replace the burned-out bulb with one of the samewattage rating. Otherwise, itmay cause damage to the fuseor electric wiring system.
OYDM076048

781
Maintenance
Headlight bulbAlways handle them carefully, and
avoid scratches and abrasions. If the
bulbs are lit, avoid contact with liq-
uids. Never touch the glass with bare
hands. Residual oil may cause the
bulb to overheat and burst when lit. A
bulb should be operated only when
installed in a headlight.
If a bulb becomes damaged or
cracked, replace it immediately and
carefully dispose of it.
Wear eye protection when changing
a bulb. Allow the bulb to cool down
before handling it.Headlight (bulb type)
1. Turn off the engine.
2. Open the hood.
3. Remove the headlight bulb coverby turning it counterclockwise.
4. Disconnect the headlight bulb socket-connector.
5. Remove the bulb from the head- light assembly.
6. Install a new headlight bulb.
7. Connect the headlight bulb socket- connector.
8. Install the headlight bulb cover by turning it clockwise.
OHD076046
WARNING- Halogen
bulbs
Handle halogen bulbs with care.
Halogen bulbs contain pressur-
ized gas that will produce flying
pieces of glass if broken.
OYD076010L
Low
HIgh

Maintenance
82
7
If the headlight aiming adjustment is
necessary after the headlight
assembly is reinstalled, consult an
authorized Kia dealer.Front side marker/Front turn sig-
nal light
1. Open the hood.
2. Disconnect the negative battery cable.
3. Loosen the retaining bolts and remove the headlamp assembly
from the body of the vehicle. If you
can reach to the bulb without
removing the headlamp assembly,
you don’t need to do step 3.
4. Disconnect the power connec tor(s) from the back of the head
lamp assembly. Front side marker
5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6. Pull the bulb out of the socket.
7. Insert a new bulb.
8. Install the socket in the assembly by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into assembly
and turn the socket clockwise.
9. Reinstall the headlamp assembly, bumper to the body of the vehicle.
OYDDMC2043
OYDM076073

Index
6I
Lane Keeping Assist System (LKAS). . . . . . . . . . . . . . 5-66LKAS function change . . . . . . . . . . . . . . . . . . . . . . 5-73
LKAS malfunction . . . . . . . . . . . . . . . . . . . . . . . . . . 5-72
LKAS operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-67
LCD window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62 LCD Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-67
Over view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62
Trip information (Trip computer) . . . . . . . . . . . . . . . 4-62
Light bulbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-\
80 Front lights replacement . . . . . . . . . . . . . . . . . . . . . . 7-80
High mounted stop lamp replacement . . . . . . . . . . . 7-89
Interior lamp bulb replacement . . . . . . . . . . . . . . . . 7-92
License plate lamp bulb replacement . . . . . . . . . . . 7-91
Outside Mirrors with Turn Signal Indicators . . . . . 7-84
Rear combination lamp bulb replacement . . . . . . . . 7-84
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. 4-94 AFLS (Adaptive Front Lighting System) . . . . . . . . . 4-99
Battery saver function . . . . . . . . . . . . . . . . . . . . . . . . 4-94
Daytime running light. . . . . . . . . . . . . . . . . . . . . . . . 4-94
Front fog light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-98
Headlight escort function . . . . . . . . . . . . . . . . . . . . . 4-94
High beam operation . . . . . . . . . . . . . . . . . . . . . . . . 4-96
Lighting control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-95
Turn signals and lane change signals . . . . . . . . . . . . 4-97 Maintenance services . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Owner maintenance precautions . . . . . . . . . . . . . . . . . 7-6
Owner’s responsibility . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Manual climate control system . . . . . . . . . . . . . . . . . . 4-109 Checking the amount of air conditionerrefrigerant and compressor lubricant . . . . . . . . . . 4-118
Climate control air filter . . . . . . . . . . . . . . . . . . . . . 4-117
Heating and air conditioning . . . . . . . . . . . . . . . . . 4-110
System operation. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-115
Manual Transaxle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14 Good driving practices . . . . . . . . . . . . . . . . . . . . . . . 5-17
Manual transaxle operation . . . . . . . . . . . . . . . . . . . 5-14
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . 4-51 Inside rearview mirror . . . . . . . . . . . . . . . . . . . . . . . 4-51
Outside rearview mirror . . . . . . . . . . . . . . . . . . . . . . 4-52
Owner maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7 Owner maintenance schedule . . . . . . . . . . . . . . . . . . 7-7
Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-39 Checking the parking brake . . . . . . . . . . . . . . . . . . . 7-39
LM
O
P
YDM CAN (ENG) Index.qxp 9/11/2017 12:44 PM Page 6