2018 KIA CARENS RHD light

Maintenance
98
8
Rear fog light (if equipped)
1. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
2. Pull the bulb out of the socket.
3. Insert a new bulb into the socket.
4. Install the socket into the assem- bly by aligning the tabs on the
socket with the slots on the
assembly and turning the socket
clockwise.
5. Reinstall the light assembly to the body of the vehicle. Tail light or stop and tail light
(LED type)
If the light bulb does not operate,
have your vehicle checked by a pro-
fessional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.
High mounted stop light bulb replacement
If the light bulb does not operate,
have your vehicle checked by a pro-
fessional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.
ODMEMC2012
ORP072043

899
Maintenance
License plate light bulb replacement
1. Remove the lens retaining screwswith a philips head screwdriver.
2. Remove the socket from the assembly by turning the socket
counterclockwise.
3. Remove the bulb by pulling it straight out.
4. Install the socket into the assembly by aligning the tabs on the socket
with the slots on the assembly and
turning the socket clockwise.
5. Install a new bulb.
6. Reinstall the lens securely with the lens retaining screws.
ORP076080L
■Map lamp
■Vanity mirror lamp
■ Luggage room lamp
■Room lamp
■Foot lamp
OGD071039/OQL075067/ORP072044/ ORP072056R/ORP072045

Maintenance
100
8
Interior light bulb replacement
Map lamp, Vanity mirror lamp,
Room lamp, Luggage room lamp, Foot lamp
1. Using a flat-blade screwdriver, gently pry the lens from the interi- or light housing.
2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket.
4. Align the lens tabs with the interior
light housing notches and snap
the lens into place.
WARNING
Prior to working on the interior
lights, ensure that the light is off
to avoid burning your fingers or
receiving an electric shock.
CAUTION
Be careful not to dirt or damage lens, lens tab, and plastic hous-ings.

8101
Maintenance
APPEARANCE CARE
Exterior care
Exterior general caution
It is very important to follow the label
directions when using any chemical
cleaner or polish. Read all warningand caution statements that appearon the label.
Finish maintenance
Washing
To help protect your vehicle’s finish
from rust and deterioration, wash itthoroughly and frequently at least
once a month with lukewarm or cold
water.
If you use your vehicle for off-road
driving, you should wash it after each
off-road trip. Pay special attention to
the removal of any accumulation of
salt, dirt, mud, and other foreign
materials. Ensure drain holes in the
lower edges of the doors and rocker
panels are kept clean.
Insects, tar, tree sap, bird droppings,
industrial pollution and similar
deposits can damage your vehicle’s
finish if not removed immediately.
Even prompt washing with plain
water may not completely remove all
these deposits.
A mild soap, safe for use on painted
surfaces, may be used.
After washing, rinse the vehicle thor-
oughly with lukewarm or cold water.
Do not allow soap to dry on the finish.
WARNING - Wet brakes
After washing the vehicle, test
the brakes whilst driving slowly
to see if they have been affected
by water. If braking performance
is impaired, dry the brakes by
applying them lightly whilst
maintaining a slow forwardspeed.
CAUTION
Do not use strong soap, chem- ical detergents or hot water,and do not wash the vehicle in direct sunlight or when thebody of the vehicle is warm.
Be careful when washing the side windows of your vehicle.Especially, with high-pressure water, water may leak throughthe windows and wet the inte-rior.
To prevent damage to the plastic parts and lamps, donot clean with chemical sol-vents or strong detergents.

Maintenance
104
8
Aluminum wheel maintenance
The aluminum wheels are coated
with a clear protective finish.
Do not use any abrasive cleaner,
polishing compound, solvent, or
wire brushes on aluminum wheels.
They may scratch or damage thefinish.
Clean the wheel when it has cooled.
Use only mild soap or neutral deter- gent, and rinse thoroughly with
water. Also, be sure to clean the
wheels after driving on salted
roads. This helps prevent corrosion.
Avoid washing the wheels with high-speed car wash brushes.
Do not use any alkaline or acid detergent. It may damage and cor-
rode the aluminum wheels coated
with a clear protective finish.
Corrosion protection
Protecting your vehicle from corrosion
By using the most advanced design
and construction practices to combat
corrosion, we produce cars of the
highest quality. However, this is only
part of the job. To achieve the long-
term corrosion resistance your vehi-
cle can deliver, the owner's coopera-tion and assistance is also required.
Common causes of corrosion The most common causes of corro-
sion on your car are:
Road salt, dirt and moisture that isallowed to accumulate underneath
the car.
coatings by stones, gravel, abra-
sion or minor scrapes and dents
which leave unprotected metal
exposed to corrosion.WARNING
After washing the vehicle, test
the brakes whilst driving slowly
to see if they have been affected
by water. If braking performance
is impaired, dry the brakes by
applying them lightly whilst
maintaining a slow forwardspeed.

Maintenance
112
8
Diesel Particulate Filter
(if equipped)
The Diesel Particulate Filter (DPF)
system removes the soot in the
exhaust gas.
Unlike a disposable air filter, the DPF
system automatically burns (oxidizes)
and removes the accumulated soot
according to the driving condition. In
other words, the active burning byengine control system and high
exhaust gas temperature caused by
normal/high driving condition burns
and removes the accumulated soot.
However, if the vehicle continues to
be driven at repeated short distance
or driven at low speed for a long
time, the accumulated soot may not
be automatically removed because
of low exhaust gas temperature.
More than a certain amount of sootdeposited, the malfunction indicator
light ( ) illuminates. When the malfunction indicator light
blinks, it may stop blinking by driving
the vehicle at more than 60 km/h (37mph) or at more than second gear
with 1500 ~ 2500 engine rpm for a
certain time (for about 25 minutes). If the malfunction indicator light ( )
continues to be blinked or the warn-
ing massage “Check exhaust system”
illuminates in spite of the procedure,
visit a professional workshop and
check the DPF system. Kia recom-
mends to visit an authorised Kia deal-
er/service partner.
If you continue to drive with the mal-
function indicator light blinking for a
long time, the DPF system can bedamaged and fuel consumption can
be worsen.
Lean NOx Trap (if equipped)
The Lean NOx Trap (LNT) system
removes the nitrogen oxide in the
exhaust gas. The smell can occur in
the exhaust gas depending on the
quality of the fuel and it can degrade
NOx reduction performance, please
use the regulated automotive dieselfuel.
CAUTION
- Diesel Fuel
(if equipped with DPF)
It is recommended to use the regulated automotive diesel fuelfor diesel vehicle equipped with the DPF system.
If you use diesel fuel includinghigh sulfur (more than 50 ppmsulfur) and unspecified addi-tives, it can cause the DPF sys- tem to be damaged and whitesmoke can be emitted.

95
Specifications & Consumer information
BULB WATTAGELight Bulb Wattage Bulb type
Front Headlamps (Low) 55 H7L
Headlamps (Low) - HID type* 35 D3S
Headlamps (High) 55 H7L
Front turn signal lamps* 21 PY21W
Front position lamps* LED LED
Front fog lamps* 35 H8LL
Side Repeater lamps* 5 WY5W
Static bending lamps* 55 H7L
Daytime running lamps* LED LED
Rear Rear fog lamps* 21 P21W
Bulb type Rear Stop/Tail lamps (outside) 21/5 P21/5W
Rear tail lamps (Inside) 5 P21/5W
LED type Rear Stop/Tail lamps (outside) LED LED
Rear tail lamps (Inside) LED LED
Rear turn signal lamps 21 PY21W
Back-up lamps 16 W16W
High mounted stop lamp* LED LED
License plate lamps 5 W5W
Interior Map lamps 10 or LED 10W or LED Room lamps
10 10W
LEDLED
Vanity mirror lamps5FESTOON
Luggage lamp 5 or LED FESTOON or LED
Portable lamp* LED LED
* If equipped
Type A Type B

Index
2
I
Active ECO system........................................................6-43
Active ECO operation ................................................6-43
Limitation of Active ECO operation ..........................6-43
When Active ECO is activated ..................................6-43
Air bag-supplemental restraint system ..........................3-53 Additional safety precautions ....................................3-77
Air bag warning and light ..........................................3-57
Air bag warning label ................................................3-78
Curtain air bag ............................................................3-69
Driver’s and passenger’s front air bag ........................3-62
Front passenger's air bag warning ..............................3-56
Inflation and non-inflation conditions of the air bag ......................................................................3-71
Side air bag ................................................................3-67
SRS Care ....................................................................3-76
SRS components and functions ..................................3-59
Air cleaner air cleaner ..................................................8-40 Filter replacement ......................................................8-40
Air conditioner compressor label ..................................9-13
Appearance care ..........................................................8-101 Exterior care ..............................................................8-101
Interior care ..............................................................8-107
Audio (With Touch Screen) ..........................................5-64 APPENDIX ..............................................................5-151
Bluetooth ®
Wireless Technology
( Bluetooth ®
Wireless Technology equipped model) .. 5-105Bluetooth
®
Wireless Technology
(for RDS, Bluetooth® Wireless Technology equipped model) ......................................................5-106
Feature of Your Audio ................................................5-65
Media Mode ................................................................5-78
Radio Mode ................................................................5-76
Radio Mode (for RDS model) ....................................5-72
Rear View Camera ....................................................5-150
Setup ........................................................................5-143
Setup (for RDS model) ............................................5-134
Voice Recognition ....................................................5-126
Audio (Without Touch Screen) ......................................5-13
Bluetooth ®
Wireless Technology audio ......................5-50
Feature of Your Audio ................................................5-15
Media Mode ................................................................5-43
Phone ..........................................................................5-51
Radio ..........................................................................5-41
Radio (for RDS model) ..............................................5-39
Setup ..........................................................................5-30
Setup (for RDS model) ..............................................5-21
Voice Command ..........................................................5-57
Audio System ..................................................................5-2 Antenna ........................................................................5-2
Audio remote control ....................................................5-3
Caring for disc ..............................................................5-6
How vehicle audio works ............................................5-4
Automatic climate control system ..............................4-150 Automatic heating and air conditioning ..................4-151
A